Compact outdoor 5 GHz connectivity
MikroTik SXTsq 5 ac in Dubai, UAE
The MikroTik SXTsq 5 ac is a directional outdoor wireless CPE and compact backbone device for organisations that need a focused 5 GHz link without installing a large antenna enclosure. It combines an integrated 16 dBi antenna, dual-chain Wi-Fi 5 radio, Gigabit Ethernet and RouterOS in a slim IP55-rated body. FourTeck helps buyers confirm whether this exact model, its regulatory variant and its mounting approach fit the intended site before a quotation is prepared.
Planning a wireless link?
Share the two site locations, expected traffic, mounting height, quantity and required installation scope.
Direct answer for buyers
The MikroTik SXTsq 5 ac is an outdoor directional 5 GHz wireless device mainly used to build a focused link between two points or to connect a remote premises to an existing wireless network. It is most relevant to organisations, installers and service providers that have clear or near-clear line of sight and need Gigabit Ethernet at the device. Before proceeding, confirm the exact international variant, legal frequencies for the deployment country, distance, obstruction profile, mounting method, power arrangement, cable quality, grounding and RouterOS configuration requirements. It is not a replacement for an indoor omnidirectional Wi-Fi access point, and real throughput depends on channel width, interference, alignment, link conditions and configuration.
What the SXTsq 5 ac does
The unit directs radio energy through an integrated 16 dBi antenna rather than spreading coverage in every direction. That makes it useful where two endpoints face each other, such as an office and warehouse, a main building and gatehouse, or a service-provider access point and a customer site. The single Gigabit Ethernet port carries network traffic and receives passive PoE power through the same cable, reducing the need for a separate outdoor electrical outlet.
RouterOS provides bridging, routing, firewall, monitoring and wireless configuration features. The product can therefore operate as more than a simple transparent radio, although the chosen design should remain aligned with the organisation’s network architecture and support skills.
Who should consider it
The model is suited to small and medium business links, building-to-building connectivity, managed CPE deployments, temporary project offices, camera-network backhaul and branch extensions where 5 GHz spectrum is appropriate. It may also fit system integrators that need a compact RouterOS-based endpoint with an integrated directional antenna.
It is less suitable when the path is blocked by dense structures or foliage, when broad public Wi-Fi coverage is required, when Wi-Fi 6 is mandatory, or when the design calls for multiple Ethernet ports. In those cases, a different outdoor access point, sector antenna, 60 GHz bridge, fibre connection or newer SXTsq generation may be more appropriate.
Business challenges this model can help address
Connecting separate buildings
Where trenching fibre or copper is disruptive, a properly planned wireless bridge can provide a practical network path. Both endpoints, mounting points and spectrum conditions must still be evaluated.
Reaching a remote work area
A workshop, guard room, storage yard or project cabin can be linked to the main network when there is suitable line of sight and a protected cable route at each end.
Reducing outdoor hardware bulk
The integrated antenna and slim enclosure reduce the number of separate radio components. Mounting strength, alignment and environmental exposure remain important.
Standardising RouterOS operations
Organisations already using MikroTik can manage familiar bridge, route, firewall and monitoring workflows, subject to software version, security policy and administrator capability.
Core capabilities in practical terms
Directional 16 dBi antenna
Focuses the link toward the intended endpoint and supports compact outdoor deployments. Alignment quality directly affects signal and throughput.
Dual-chain Wi-Fi 5 radio
Supports 802.11a/n/ac operation with a stated maximum wireless data rate of 867 Mbit/s. Real traffic performance is lower and deployment dependent.
Gigabit Ethernet
Provides one 10/100/1000 port, avoiding the 100 Mbit/s wired bottleneck found on some entry-level outdoor CPE models.
RouterOS Level 3
Supports CPE and point-to-point use with configurable network functions. Design and permissions should be matched to the intended role.
Product-fit matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Building-to-building bridge | Endpoints have a clear path and moderate bandwidth needs | Distance, Fresnel clearance, interference, two-unit requirement |
| Wireless CPE | A compatible 5 GHz access point serves the location | AP protocol, security settings, channel plan and regulatory domain |
| Outdoor camera backhaul | Traffic is aggregated through a local switch and the link budget is adequate | Camera bitrate, switch power, VLAN design, surge protection |
| Public Wi-Fi coverage | Generally not the primary fit because the antenna is directional | Consider an outdoor omnidirectional or sector access point |
Verified technical information
| Brand | MikroTik |
|---|---|
| Product name | SXTsq 5 ac |
| Product code | RBSXTsqG-5acD, international variant |
| Product type | Outdoor directional CPE/backbone wireless device |
| Architecture and CPU | ARM 32-bit, IPQ-4018, four cores, 488–896 MHz automatic frequency range |
| Memory and storage | 256 MB RAM, 16 MB flash |
| Wireless band and standards | 5 GHz, 802.11a/n/ac, dual chain |
| Maximum wireless data rate | 867 Mbit/s stated radio rate; usable throughput is deployment dependent |
| Integrated antenna | 16 dBi directional antenna; manufacturer data sheet lists 23° beam width |
| Ethernet | One 10/100/1000 Mbit/s port |
| Power | Passive PoE, 10–28 V input, maximum 7 W consumption |
| Operating system and licence | RouterOS, Level 3 licence included |
| Dimensions | 129 × 129 × 34 mm |
| Environmental rating | IP55 on current product page; tested ambient temperature −40°C to 70°C |
| Included parts | 24 V 0.38 A power adapter, metal mounting ring and Gigabit PoE injector |
| Availability | Contact FourTeck for current UAE model, quantity and vendor lead-time confirmation |
Variant, frequency and compatibility notice
The international product code RBSXTsqG-5acD and the US variant RBSXTsqG-5acD-US do not have identical frequency permissions. The US model is factory restricted to specific ranges, while the international model supports a broader 5150–5875 MHz range that can still be limited by country regulations. Buyers in Dubai and the wider UAE should confirm the correct regulatory variant and configure the RouterOS country setting appropriately. Channel choice, output power and Dynamic Frequency Selection requirements must comply with local rules.
Compatibility is not determined only by the words “5 GHz.” The remote radio must support a compatible standard, channel width, security method and operating mode. For a transparent bridge, confirm how Layer 2 traffic, VLANs, spanning tree, DHCP and management access will pass. For routed CPE operation, confirm addressing, NAT, firewall and monitoring requirements. Professional installation, grounding and weather-resistant cable practices are strongly recommended.
A practical purchase and deployment journey
Define the traffic need
Document applications, peak traffic, latency sensitivity, VLANs and expected growth. Do not size a link only from the advertised radio rate.
Survey the path
Check distance, line of sight, Fresnel clearance, mounting height, obstructions, existing 5 GHz use and potential reflections.
Confirm the bill of materials
Verify whether two radios, mounting brackets, shielded outdoor cable, surge protection, grounding parts, switches and enclosures are required.
Configure and test
Update RouterOS, secure administrator access, set the country and channels, align the units and validate throughput, stability and failover expectations.
Capability focus: directional link performance
The 16 dBi integrated antenna is central to the SXTsq 5 ac design. Its directional pattern concentrates the radio link in a relatively narrow area, which can improve received signal compared with a low-gain omnidirectional device when the two endpoints are properly aimed. The benefit is not automatic. A directional antenna also requires more careful alignment, and a small change in mounting angle can reduce signal quality. Wind movement, flexible poles, poorly tightened brackets and rooftop vibration can create intermittent problems that are difficult to diagnose from an office.
A buyer should therefore treat mounting hardware and site access as part of the network design, not as minor accessories. The supplied metal ring supports basic pole mounting, while an adjustable mounting option may be preferable when fine aiming is necessary. Cable openings should face downward, shielded outdoor-rated Ethernet should be considered, and the grounding point should be connected to an appropriate building or tower grounding system. The radio should be mounted where personnel can maintain the stated separation and where future servicing is safe.
Link performance also depends on signal-to-noise ratio, channel width and airtime use. A wide channel can support a higher headline rate but may be more vulnerable to interference or unavailable under the local channel plan. In a busy commercial area, a narrower clean channel can outperform a wider congested one. FourTeck can discuss the intended traffic and deployment context, but final radio planning may require an onsite survey and spectrum measurements.
Capability focus: RouterOS control and security
RouterOS gives the SXTsq 5 ac flexibility beyond a fixed-function bridge. Depending on design, administrators can configure bridging, routing, VLAN handling, firewall filters, queues, monitoring, logging and management access. This can be valuable for organisations that already operate MikroTik equipment and have established configuration standards. It also means the device should not be deployed with default or weak administration practices.
During commissioning, update RouterOS to an appropriate supported release, set a strong unique administrator credential, remove or restrict unused management services and limit administrative access to trusted networks. Back up the approved configuration and document the radio name, physical location, IP address, channel, frequency, bandwidth, security settings and counterpart device. Remote management should be exposed only through a controlled design such as a management VPN, secure operations network or restricted source list.
The included Level 3 licence is suitable for the product’s CPE and point-to-point positioning, but the intended wireless mode and design should be checked rather than assumed. Organisations that need broad multi-client access-point functionality, centrally managed enterprise Wi-Fi or a different wireless package should compare alternatives. Security outcomes depend on the full configuration, software maintenance, credential management and surrounding network controls, not on the hardware alone.
Capability focus: compact passive-PoE installation
The product receives 10–28 V passive PoE through its single Gigabit Ethernet connection and has a maximum stated power consumption of 7 W. This makes installation relatively simple because one cable carries both data and power from the indoor injector to the outdoor device. The supplied 24 V adapter and Gigabit PoE injector support a basic installation, but cable length, conductor quality, voltage drop and environmental exposure must still be considered.
Passive PoE is not the same as standards-based 802.3af or 802.3at negotiation. Connecting the radio to an unsuitable power source can cause failure or damage. Confirm voltage, polarity and injector compatibility before integrating the unit with a PoE switch or third-party injector. Where the cable enters a building, surge protection and grounding strategy should be reviewed. Outdoor cabling should be UV resistant, properly supported and routed with a drip loop so water does not follow the cable into an enclosure.
The compact enclosure is useful on poles, rails and rooftops where space is limited. However, physical access, maintenance safety and cable replacement should be planned before mounting. An installation that is easy on day one but inaccessible after construction work can increase operational cost. FourTeck can include installation-planning and configuration scope in the quotation when the buyer provides site details.
Ideal environments and use cases
Office to warehouse
Connect a nearby warehouse to the main office LAN for business applications, inventory systems, voice or surveillance traffic, subject to link capacity and redundancy requirements.
Gatehouse or security post
Extend a controlled network to a remote guard room where trenching is difficult. Confirm camera traffic, access-control dependencies and local backup power.
Construction or temporary site
Provide a relocatable link to a project cabin when mounting, line of sight and regulatory requirements can be managed. Temporary does not mean ungrounded or unsecured.
Managed wireless CPE
Use as a customer endpoint connected to a compatible 5 GHz access network. Service-provider protocols, authentication, monitoring and replacement procedures must be confirmed.
Campus extension
Link an annex, workshop or classroom block where the expected application mix fits the available wireless capacity and the organisation accepts shared-spectrum risk.
Camera-network backhaul
Carry aggregated video traffic from a remote area. Calculate total and peak bitrate, recording behaviour, multicast needs and fault impact before selection.
Integration and operational considerations
Decide whether the link will operate as a transparent Layer 2 bridge or as a routed boundary. A transparent bridge can simplify endpoint addressing, but it may extend broadcast domains and spanning-tree behaviour between buildings. A routed design can provide clearer fault boundaries and policy control, although it requires addressing and routing decisions. VLAN trunking, DHCP placement, multicast, voice traffic and management access should be tested rather than assumed.
Consider the consequence of link failure. A wireless bridge serving a few non-critical workstations has a different resilience requirement from one carrying access control, production data or security cameras. Critical deployments may need a backup path, spare hardware, UPS protection, monitoring alerts and a documented replacement configuration. The SXTsq 5 ac has one Ethernet port and no built-in cellular failover, so resilience must come from the wider design.
Environmental operations also matter in the UAE. High rooftop temperatures, dust, strong sunlight and occasional heavy rain increase the importance of correct enclosure orientation, outdoor cable selection and secure mounting. The manufacturer states a broad tested ambient range, but successful field operation still depends on installation quality and regular inspection.
Questions to resolve before ordering
Approximate distance is not enough for a dependable link assessment. Share map points, roof heights and visible obstructions.
A visually open path can still have partial obstruction from roof edges, trees or future construction.
List applications, concurrent users, camera streams and growth rather than relying on the 867 Mbit/s radio figure.
Confirm RBSXTsqG-5acD for the intended country and avoid receiving a region-locked variant that does not suit the deployment.
Define commissioning, documentation, backup, updates, monitoring and fault-response ownership.
Clarify poles, brackets, cable routes, grounding, surge protection, access equipment and permits.
Procurement checklist
☐ Exact model code and international variant
☐ Required quantity and whether a matched pair is needed
☐ Link endpoints, distance and mounting heights
☐ Expected aggregate and peak traffic
☐ Channel, regulatory and interference review
☐ Outdoor-rated shielded Ethernet cable length
☐ Passive PoE source and backup-power requirement
☐ Pole, railing or adjustable bracket requirement
☐ Grounding and surge-protection scope
☐ Bridge, routed, VLAN and firewall configuration
☐ Installation, alignment and acceptance testing
☐ RouterOS update, backup and documentation
☐ Warranty terms and return process confirmation
☐ UAE delivery location and target project schedule
How FourTeck can assist
FourTeck can review the intended business use, help confirm whether the SXTsq 5 ac is technically appropriate, check the exact model code and prepare a quotation around the stated quantity and destination. Assistance can include discussion of link endpoints, required throughput, passive-PoE arrangements, mounting options, cable and grounding needs, RouterOS configuration scope and installation planning. Where the application would be better served by another MikroTik model, a newer Wi-Fi 6 unit, a sector access point, a 60 GHz bridge or a wired connection, the selection can be reconsidered before purchase.
A useful enquiry should include photographs or coordinates of both sites, approximate mounting heights, available power, cable distance, number of users or cameras, current network equipment and whether remote or onsite configuration is required. Visit the FourTeck technology products area, review available installation and configuration services, or send the project requirement for quotation coordination.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the MikroTik SXTsq 5 ac, because supply can vary by exact model, regulatory version, quantity and vendor lead time. A quotation should identify the product code, included accessories, requested quantity, delivery location and any installation or configuration services. Buyers should also confirm warranty handling and whether replacement units or spare mounting parts are needed for operational continuity.
Delivery and project coordination can be discussed after the exact requirement is confirmed. Where installation is requested, provide rooftop or pole access details, working-height restrictions, cable route information, available network ports and site induction requirements. Configuration scope should state whether the device will be supplied with basic settings, integrated into an existing MikroTik environment or commissioned as part of a tested point-to-point link.
Dubai, Abu Dhabi, Sharjah and Ajman coverage
FourTeck can coordinate requirement review, quotation and delivery planning for organisations in Dubai, Abu Dhabi, Sharjah and Ajman. The engagement can cover a device-only request or a broader scope involving site information, mounting accessories, passive-PoE design, cable requirements, RouterOS configuration and acceptance testing. Availability, delivery timing and onsite service scheduling depend on the confirmed model, quantity, destination and project conditions. Buyers should provide the installation address, contact person, access rules and expected completion window so the quotation can distinguish product supply from engineering or installation work.
GCC availability
FourTeck can assist organisations planning MikroTik outdoor wireless links across GCC markets with requirement review, model selection, quotation coordination and deployment-scope discussions. Buyers in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman should confirm the exact destination because radio regulations, accepted frequency ranges, power accessories, delivery arrangements and service logistics can differ. For the SXTsq 5 ac, the regulatory variant is especially important; a country-locked model should not be assumed suitable for another market. Share the product code, quantity, intended link distance, endpoint locations, required accessories, RouterOS configuration needs and preferred project schedule. Product availability, vendor lead time, licensing details, delivery timing and onsite work remain dependent on country, quantity and project scope. FourTeck can also help separate hardware supply from mounting, cabling, alignment, testing and documentation requirements. For regional enquiries, the FourTeck Kuwait resource may also support relevant coordination.
Africa availability
Organisations evaluating the MikroTik SXTsq 5 ac for African projects can contact FourTeck for product, accessory and deployment-planning guidance. Applications may include branch links, campus extensions, remote facilities and managed wireless CPE, but each project should be assessed for local frequency rules, environmental exposure, mounting conditions, power quality and available technical support. Fulfilment can depend on destination country, exact model variant, quantity, shipping method, vendor lead time and local import or regulatory requirements. Buyers should provide the destination, endpoint distance, expected traffic, preferred schedule, configuration scope and whether installation support is required. FourTeck does not assume that one regional stock or service arrangement applies across the continent. For selected East African enquiries, visit FourTeck Kenya or FourTeck Uganda; broader project discussions can begin through the FourTeck Africa portal.
Related products and services to consider
SXTsq 5 ax
A newer Wi-Fi 6 generation may be considered where modern radio capability is preferred. Confirm interoperability and project budget.
SXTsq Lite5
An entry-level alternative for different performance requirements. It should not be treated as equivalent because Ethernet and wireless capabilities differ.
Adjustable mounting hardware
Fine-alignment brackets may improve installation flexibility where the basic metal ring does not provide the preferred aiming range.
Outdoor cabling and surge protection
Shielded cable, grounding and protection components should be specified for the actual route and site conditions.
Wireless link assessment
A site and path review can identify obstructions, mounting constraints and spectrum concerns before equipment is ordered.
RouterOS configuration support
Configuration assistance can cover secure management, bridge or route design, VLANs, monitoring and documentation.
Why businesses contact FourTeck
Outdoor wireless purchases often fail for reasons that are not visible in a product title: the wrong regulatory variant, insufficient line of sight, unsuitable PoE, weak mounting, unrealistic throughput expectations or missing configuration scope. FourTeck helps turn the product request into a clearer bill of materials and deployment discussion. This includes confirming the exact model, reviewing the application, identifying accessories, separating supply from services and coordinating a quotation around the destination and required schedule.
The aim is not to present every wireless challenge as a fit for the SXTsq 5 ac. Where requirements indicate a different antenna pattern, more capacity, Wi-Fi 6, multiple Ethernet ports, fibre, 60 GHz or cellular backup, buyers can compare suitable options before committing. Learn more about FourTeck business technology assistance or use the general FourTeck contact page for multi-country requirements.
Frequently asked questions
What is the MikroTik SXTsq 5 ac mainly used for?
It is mainly used as an outdoor 5 GHz directional CPE or for point-to-point wireless links between compatible endpoints. Common examples include connecting two buildings or reaching a remote office, workshop or security post.
Do I need two SXTsq 5 ac units?
A dedicated point-to-point link normally requires a compatible radio at each end. Two identical units may be used, but the remote endpoint can be another compatible device when the protocol, channel, security and antenna design are suitable.
Does it provide indoor Wi-Fi coverage?
It is not primarily an indoor coverage access point. Its 16 dBi antenna is directional and intended to focus a link. Indoor users normally connect through a separate access point or wired network behind the remote unit.
What throughput should I expect?
The stated maximum wireless data rate is 867 Mbit/s, but application throughput will be lower and depends on channel width, signal quality, interference, protocol overhead, alignment, traffic direction and RouterOS configuration.
Is a RouterOS licence included?
Yes. MikroTik lists RouterOS with a Level 3 licence for this model. No separate base licence purchase is normally required, but the intended operating mode should still be confirmed.
Can I power it from any PoE switch?
No. The device uses 10–28 V passive PoE. Passive PoE does not negotiate like 802.3af or 802.3at, so voltage and injector or switch compatibility must be checked before connection.
Is the US variant suitable for Dubai?
The US variant has factory frequency restrictions. Buyers should request the correct international model and confirm UAE regulatory settings rather than assuming any SXTsq 5 ac variant is interchangeable.
What comes in the package?
The manufacturer lists a 24 V 0.38 A power adapter, one metal mounting ring and a Gigabit PoE injector. Confirm package contents and plug type in the quotation for the supplied regional unit.
Can FourTeck configure and install the link?
Configuration and installation scope can be discussed. Provide endpoint details, mounting heights, cable routes, required network design and site-access conditions so the service requirement can be quoted accurately.
How do I request a Dubai quotation?
Share the exact model, quantity, delivery location, link distance, intended use, installation requirement and preferred schedule. FourTeck can then confirm current UAE availability and prepare the appropriate quotation.
Confirm the right model before ordering
Send FourTeck the endpoint locations, expected traffic, quantity, delivery address and required installation scope. The team can help confirm the international SXTsq 5 ac variant and prepare a UAE quotation.
