Hot-Swap Power Resilience for Supported MikroTik Systems
MikroTik 12POW150 in Dubai, UAE
The MikroTik 12POW150 is a 12V, 150W AC/DC hot-swap power module intended for specific MikroTik carrier-grade routers and high-capacity switches. It supports continuity planning by allowing a failed compatible module to be replaced while the second installed supply continues powering the chassis.
12POW150
12V, 150W AC/DC
Hot-swappable module
Model compatibility first
Direct Answer for Buyers
MikroTik 12POW150 is a field-replaceable hot-swap power supply for selected MikroTik rackmount devices fitted with dual redundant 12V, 150W AC/DC power modules. Its main role is to replace a failed module or provide a tested spare so that full power redundancy can be restored without scheduling a complete chassis shutdown. It should be considered by organisations operating supported MikroTik CCR or CRS hardware in business-critical networks. Before proceeding, confirm the exact chassis model, module product code, hardware compatibility, required quantity, power input conditions, and whether installation will be performed by qualified technical staff. Availability, warranty, and delivery timing should be confirmed in the quotation.
What the 12POW150 Does
The module converts incoming AC power into the 12V DC power required by compatible MikroTik equipment. In a supported chassis equipped with two matching power supplies, one module can continue supporting the device if the other module fails or is removed. This arrangement gives network teams an opportunity to replace the affected unit while the router or switch remains in service.
The value of the product is therefore operational rather than performance-based. It does not increase routing throughput, switching capacity, port density, or software capability. Its purpose is to maintain the hardware power architecture designed into the compatible chassis and to help administrators restore redundancy after a power-supply fault.
Who Should Consider It
The MikroTik 12POW150 may be relevant to internet service providers, data-centre operators, enterprise IT teams, hosting companies, managed service providers, system integrators, universities, government networks, and organisations using compatible MikroTik infrastructure in a role where an unplanned shutdown would be disruptive.
It is also useful for procurement teams building a controlled spare-parts kit. A replacement unit can be kept onsite for equipment that supports hot-swap maintenance, provided the spare is stored correctly, periodically inspected, and matched to the precise chassis and module type in service.
Business Problems This Power Module Helps Address
Loss of Full Power Redundancy
A chassis may continue running on one supply after a module failure, but it no longer has the same power redundancy. Installing the correct replacement restores the intended dual-module arrangement.
Avoidable Maintenance Shutdowns
Hot-swap support can allow a compatible failed module to be replaced without restarting the router or switch, reducing the need for a separate shutdown solely for power-module replacement.
Unclear Spare-Part Selection
Power modules can look similar while using different electrical or mechanical designs. Exact product-code and chassis checks help prevent ordering an unsuitable spare.
Longer Recovery from PSU Failure
Keeping a validated spare as part of a maintenance plan can shorten the procurement stage after a failure, although replacement work should still follow the device and site safety procedure.
Product-Fit Decision Matrix
| Requirement | Suitable When | Confirm Before Ordering |
|---|---|---|
| Replacement of a failed supply | The installed chassis is officially compatible with 12POW150. | Existing module label, chassis model, and fault diagnosis. |
| Onsite operational spare | The organisation maintains critical MikroTik hardware and a documented spare-parts process. | Quantity, storage conditions, inspection cycle, and responsible engineer. |
| Redundancy restoration | The chassis currently operates on one healthy module after a second module failure. | Health of the remaining supply and possible upstream power cause. |
| New equipment accessory | A separately purchased spare is required in addition to modules included with compatible hardware. | What is already included with the main device and current vendor packaging. |
Verified Product Information
| Brand | MikroTik |
|---|---|
| Product code | 12POW150 |
| Product type | Hot-swap AC/DC power supply module |
| Output | 12V DC |
| Rated power | 150W |
| Confirmed compatible systems | MikroTik CCR1072-1G-8S+, CCR2216-1G-12XS-2XQ, and CRS518-16XS-2XQ-RM are identified by MikroTik as using dual redundant 12V 150W hot-swap supplies. Confirm current compatibility for every order. |
| Redundancy role | Allows a supported dual-supply chassis to continue operating on the second module while one module is replaced, subject to correct operation of the remaining supply and site power. |
| License requirement | No software license is normally associated with the power module itself. |
| Included components | Confirm current package contents with the quotation. |
| Input power details | Confirm against the current module label, official safety documentation, and site electrical standard. |
| Dimensions and weight | Not confirmed on the product summary; request current documentation if required for logistics. |
| Warranty guidance | Warranty conditions depend on the supplied unit, source, region, and quotation terms. |
| UAE availability | Contact FourTeck to confirm current availability, quantity, price, and vendor lead time. |
Compatibility and Dependency Notice
The 12POW150 should not be selected only because another device uses a 12V or 150W supply. A compatible hot-swap power module must match the chassis rails, connector format, retention mechanism, cooling arrangement, power-control design, and vendor-supported electrical specification. The safest ordering method is to provide the full MikroTik device model and a readable photograph of the existing module label. Where equipment has been refurbished, repaired, or modified, verify that the installed module and chassis configuration still match the manufacturer’s intended design.
A failed supply can also be a symptom of a wider issue, including unstable upstream power, damaged cabling, blocked airflow, excessive heat, contamination, or a fault inside the chassis. Replacing the module may restore redundancy, but it should not replace proper fault investigation. Use trained personnel and follow the safety information supplied for the product and host device.
A Practical Purchase and Replacement Journey
Identify the Chassis
Record the full router or switch model, serial information where appropriate, rack location, and the role the device performs.
Verify the Module
Read the installed power-supply product code and compare it with the required 12POW150 designation. A photograph can reduce transcription errors.
Review the Fault
Check device alarms, LEDs, logs, upstream power, and environmental conditions to establish whether the module itself is the likely cause.
Request a Quotation
Share model, quantity, destination, urgency, installation requirement, and any documentation or warranty expectations.
Plan Safe Replacement
Confirm that the second supply and power feed are healthy, then follow the approved maintenance and electrical safety procedure.
Hot-Swap Capability and Operational Continuity
Hot-swap design is valuable because it separates replacement of the power module from a full device restart. In a correctly functioning supported chassis, the second power supply can carry the active load while the affected module is removed and replaced. For a network team, this can reduce the operational impact of restoring redundancy on a core router or high-capacity switch.
Hot-swap does not mean risk-free or procedure-free. The remaining module, its power feed, and the chassis must be healthy enough to support operation during the change. Engineers should check alarms and load conditions before removing any component. They should also verify that the replacement is the exact supported module and that it seats correctly without force. Any unusual resistance, arcing, damaged contacts, burning smell, discoloration, or repeated failure should stop the replacement process and trigger further technical investigation.
For business buyers, the key benefit is not an absolute promise of uninterrupted service. It is the ability to maintain equipment using the redundancy architecture built into the supported MikroTik platform. Wider availability still depends on upstream power, cabling, UPS design, rack cooling, firmware stability, network topology, and the health of the rest of the system.
Redundant Power Is a System, Not a Single Component
Purchasing a second or replacement power module is only one part of a resilient design. True power-path diversity may also require two independent power distribution units, separate UPS outputs, correctly rated circuits, monitored rack power, and disciplined cable routing. Plugging both modules into the same unprotected extension strip may provide module redundancy but not meaningful protection against a failure of the common upstream source.
Network operators should map which supply is connected to which circuit and document the arrangement. Labels should be clear enough that an engineer can isolate one feed without disconnecting both. Where the organisation uses environmental monitoring, power alarms from the chassis should be incorporated into the incident process so a failed supply does not remain unnoticed while the device runs on a single module.
The 12POW150 can support this wider plan when it is correctly matched to the host device. FourTeck can discuss the requested module, related MikroTik equipment, and installation coordination, but the final resilience design should reflect the site’s electrical system, business criticality, maintenance policy, and risk tolerance.
Spare-Parts Planning for Critical MikroTik Infrastructure
A planned spare can be more useful than an emergency purchase started after failure. Organisations that depend on compatible MikroTik equipment should evaluate how many units are deployed, whether they share the same power module, the business impact of prolonged single-supply operation, and the vendor lead time for replacements. One spare may be sufficient for a small controlled estate, while larger environments may require a quantity based on installed base, failure history, service locations, and internal recovery targets.
Spare modules should be kept in suitable packaging, protected from dust, moisture, electrostatic risk, impact, and extreme temperature. Procurement records should preserve the product code and supplier details. Periodic inventory checks help confirm that the spare has not been used, moved, or confused with a similar module. Where the equipment estate changes, the spare list should be reviewed because a module purchased for one product generation may not apply to another.
A spare-parts policy should also name the people authorised to perform replacement, state where safety guidance is stored, and explain when a module failure requires escalation rather than immediate swap. These controls help turn the 12POW150 from an isolated purchase into part of a reliable maintenance process.
Ideal Business Environments and Use Cases
Service Provider Core Networks
Operators using supported CCR hardware may keep the module as a replacement for a failed power supply in an edge, aggregation, or core routing role.
Data-Centre Switching
Supported CRS platforms in high-bandwidth racks can use dual modules to reduce dependence on a single internal supply.
Enterprise Backbone Rooms
Businesses operating a compatible MikroTik chassis in a central communications room may require a validated spare and documented replacement process.
Managed Network Services
Service providers can include the correct power module in client-specific spare holdings, subject to ownership, warranty, and response-scope agreements.
Laboratory and Staging Systems
Technical teams may use a verified unit to test maintenance procedures or restore redundancy before equipment returns to production.
Multi-Site Operations
Organisations can assess whether a central spare pool or site-level spare is more practical based on travel time, risk, and installed equipment consistency.
Installation and Operational Considerations
Before installation, confirm that the remaining active supply is stable and that the chassis does not report additional power, temperature, fan, or board faults. Review the official safety and regulatory information. Access to the rack should be controlled, and cables should be arranged so the engineer can identify the correct module and power feed without disturbing adjacent equipment.
The replacement should be inspected for shipping damage, bent parts, contamination, or an incorrect label. Do not force a module into a slot. Mechanical mismatch is a warning that the part or orientation may be wrong. After insertion, verify that the module seats and locks as intended, connect power according to the site procedure, and confirm status through LEDs, device monitoring, and system logs where available.
After replacement, the team should observe the device long enough to confirm stable operation. Update maintenance records with date, reason, part details, engineer, and any fault evidence. A repeatedly failing module may point to a chassis, environmental, or upstream electrical problem. In that case, further troubleshooting is more appropriate than continuing to replace power supplies.
FourTeck can help coordinate product identification and discuss installation support as a separate scope. The quotation should clearly state whether the request covers supply only, remote guidance, onsite replacement, fault investigation, or a broader power-resilience review.
Questions Buyers Should Resolve Before Ordering
Use the full model code rather than a shortened family name.
Check the printed label and provide a photo when possible.
The required urgency, testing, and quantity may differ.
Review alarms, upstream power, cooling, and physical condition.
Confirm whether cables, documentation, or other accessories are expected.
Identify trained staff and include onsite support in the quote if needed.
Procurement teams should request applicable terms before purchase.
Destination and quantity affect quotation and delivery coordination.
Procurement Checklist
- Full MikroTik router or switch model
- Existing power module product code
- Readable photo of the old module label
- Required quantity and spare strategy
- Delivery destination and site contact
- Required procurement timeline
- Power and rack environment confirmation
- Installation or replacement support scope
- Fault symptoms and device alarm details
- Current package-content confirmation
- Warranty terms required by the buyer
- Quotation validity and vendor lead time
How FourTeck Can Assist
Requirement Review
FourTeck can review the chassis model, module code, quantity, and intended use before preparing the request.
Compatibility Guidance
The product identity can be checked against the target MikroTik equipment to reduce avoidable ordering errors.
Quotation Coordination
Buyers can request current commercial terms, lead-time guidance, and destination-based delivery coordination.
Service Scope Planning
Where required, installation, replacement, testing, or broader network support can be discussed as separate quotation items.
For wider technology requirements, browse FourTeck network and security products, review available technology support services, or send the full bill of materials through the FourTeck contact page.
UAE Availability and Support Guidance
Contact FourTeck to confirm current UAE availability for the MikroTik 12POW150. Supply can depend on quantity, vendor inventory, regional channel availability, and lead time at the point of quotation. Buyers should not schedule a maintenance change until the correct unit has been received, inspected, and matched to the target chassis.
For projects in Dubai, Abu Dhabi, Sharjah, and Ajman, FourTeck can discuss quotation coordination, delivery planning, and optional technical support after the exact requirement is documented. Installation and configuration scope should be included in the quotation when required. Warranty terms, return conditions, and package contents should also be confirmed before the purchase order is issued. No assumption should be made about immediate stock or a fixed delivery date without written confirmation.
Businesses planning a broader refresh can also use the FourTeck UAE technology site to discuss routers, switches, power resilience, network design, and related infrastructure requirements.
GCC Availability
FourTeck can assist organisations across the GCC with requirement review and quotation coordination for the MikroTik 12POW150 and related compatible equipment. Buyers in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain, and Oman should provide the destination country, target chassis model, module code, required quantity, installation location, and expected procurement timeline. This information helps distinguish a routine spare-parts request from an urgent recovery requirement and allows the supply and service scope to be discussed accurately.
Product availability, delivery schedules, warranty handling, service visits, and vendor lead times can vary by country, quantity, and current channel conditions. Power-input standards, rack procedures, and onsite access requirements may also affect deployment planning. FourTeck can help review model selection, quotation details, delivery coordination, and replacement support, but no local stock, customs outcome, or installation date should be assumed until confirmed in writing. For Kuwait-related technology coordination, buyers may also visit FourTeck Kuwait.
Africa Availability
Organisations planning procurement for Africa can contact FourTeck to evaluate the exact MikroTik module requirement, compatible chassis, quantity, destination, and preferred delivery schedule. For data centres, service providers, enterprise networks, and managed infrastructure projects, the request should also identify whether the unit is needed as a replacement, a site spare, or part of a larger equipment bill of materials. FourTeck can assist with product identification, quotation coordination, accessory planning, and discussion of installation or support expectations.
Availability and fulfilment can depend on the destination country, vendor lead time, shipping arrangements, local power conditions, regulatory requirements, quantity, and project access. Buyers in East Africa and other regions should share the full delivery address, technical contact, target equipment model, and any documentation required by procurement. No claim is made about local inventory, immediate shipment, customs clearance, or country-wide onsite coverage. Regional enquiries can be directed through FourTeck Africa, with additional information available for Kenya technology projects and Uganda requirements.
Related Products and Services to Discuss
Compatible MikroTik CCR Routers
Confirm the exact router model and current hardware requirements before combining the module with a new or existing CCR deployment.
Compatible MikroTik CRS Switches
Review the switch model, included power modules, rack design, and uplink requirements as part of the complete bill of materials.
Rack Power and UPS Planning
Assess upstream power diversity, PDU layout, UPS capacity, monitoring, and cable identification rather than relying only on dual internal modules.
Installation and Replacement Support
Discuss safe replacement, device health checks, verification, documentation, and post-change monitoring as a defined service scope.
Why Businesses Contact FourTeck
A small accessory can still create a significant procurement problem when the wrong model causes delay or cannot be installed. Businesses contact FourTeck for practical help with product-code confirmation, host-device identification, bill-of-material review, quotation coordination, delivery planning, and support-scope discussion. This is especially useful when the request comes from a non-technical purchasing team that needs to translate an engineer’s fault report into an accurate order.
FourTeck can also help buyers separate product supply from optional services. A quotation can be structured around the module alone or expanded to include installation planning, replacement support, equipment review, or related infrastructure requirements. The scope should be agreed before purchase so expectations for travel, access, testing, documentation, and post-change support are clear.
The objective is procurement clarity rather than unsupported claims. Current availability, pricing, warranty, and lead time remain subject to confirmation for the specific destination and quantity.
Frequently Asked Questions
What is the MikroTik 12POW150?
It is a 12V, 150W AC/DC hot-swap power supply module sold for selected MikroTik routers and switches that use dual redundant power modules.
Which devices are confirmed as compatible?
MikroTik identifies the CCR1072-1G-8S+, CCR2216-1G-12XS-2XQ, and CRS518-16XS-2XQ-RM in connection with the 12POW150. Compatibility should still be checked against the current official information and the actual chassis label before ordering.
Can the module be replaced without shutting down the device?
On a supported chassis with a healthy second power module, the 12POW150 is designed for hot-swap replacement. Engineers should follow the official safety procedure and confirm that the remaining power path is stable before the change.
Does one 12POW150 create power redundancy?
No. Redundancy depends on a compatible chassis using two functioning power modules and suitable upstream power arrangements. One module is a component within that design.
Can I use it with any 12V 150W MikroTik device?
No. Voltage and wattage are not enough to establish compatibility. The host chassis, connector, mechanical design, and official support information must match.
Is a software license required?
The power module itself does not normally require a software license. Licenses associated with the host router or switch are separate.
What should I provide for an accurate quote?
Provide the exact chassis model, a photo of the current module label, quantity, destination, required timeline, and whether installation or replacement support is required.
Is the 12POW150 currently available in Dubai?
Availability changes with quantity and vendor lead time. Contact FourTeck for current UAE availability and written quotation details.
Does replacing the power supply fix every power alarm?
No. The cause may involve the module, chassis, cable, PDU, UPS, circuit, heat, airflow, or another system condition. Diagnose the fault before assuming a replacement is sufficient.
Can FourTeck assist with installation?
Installation or replacement support can be discussed as a separate scope. Site location, access, equipment condition, maintenance window, and testing expectations are needed for quotation.
Confirm the Exact Module Before Purchasing
Send FourTeck the full MikroTik chassis model, a clear power-module label photo, quantity, destination, and required support scope. The team can coordinate compatibility review, current UAE availability, and a formal quotation.
