Compact routing and passive PoE control
MikroTik hEX PoE Lite in Dubai, UAE
The RB750UPr2 combines five 10/100 Ethernet ports, RouterOS Level 4, USB connectivity and passive PoE output on four ports in a compact enclosure. It is a practical option for carefully sized small networks where wired bandwidth is moderate and connected PoE devices are electrically compatible.
Buyer snapshot
Model: RB750UPr2
Network ports: Five 10/100 Ethernet
PoE output: Passive PoE on Ether2-Ether5
Best fit: Small, managed wired networks with confirmed power compatibility
Check bandwidth needs
Verify every endpoint
Flexible network control
Suitable for constrained spaces
Direct answer for buyers
The MikroTik hEX PoE Lite is a compact wired router for small networks that need RouterOS features and the ability to send passive PoE from four Ethernet ports. It can suit small offices, retail counters, technical rooms, temporary sites and managed edge deployments where 100 Mbps port speed is sufficient. The most important checks are not only routing features but also link speed, power-input voltage, total PoE budget and the exact PoE requirements of every connected device. Buyers should confirm that the intended access point, radio, camera or other endpoint accepts passive PoE at the supplied voltage. Where Gigabit throughput or standards-based 802.3af/at PoE is required, another model may be more appropriate.
What it does
The device provides routing, firewalling, traffic management and network services through MikroTik RouterOS. Its five wired interfaces can be used to separate internet, local network and powered endpoint connections according to the chosen design.
Four of the Ethernet ports can also deliver passive PoE. This can simplify selected installations by carrying data and power over one cable, but only when the connected hardware accepts the same passive power method and voltage.
Who it suits
It is most relevant to businesses with modest bandwidth requirements, a small number of wired endpoints and administrators who want RouterOS control in a low-footprint device.
It is less suitable for offices expecting sustained Gigabit traffic, large numbers of users, heavy VPN workloads, extensive application filtering or endpoints that require automatic 802.3af/at power negotiation.
Business challenges this model can help address
Limited cabinet space
Its small plastic enclosure can fit into compact network shelves, counters or utility spaces where a full-size rack router would be unnecessary.
Too many power adapters
Compatible passive-PoE devices may receive power through the Ethernet cable, reducing adapter clutter and simplifying selected endpoint placements.
Need for policy control
RouterOS supports configurable firewall, NAT, DHCP, routing, queues and monitoring features, allowing administrators to create a controlled edge rather than use an unmanaged device.
Small remote locations
A compact router can be used at low-traffic branches, kiosks, workshops or remote technical points where only a few wired connections are required.
Product-fit matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Internet and LAN speed | Each connection can operate within 10/100 Ethernet limits | ISP speed, inter-VLAN traffic and future growth |
| Powered endpoints | Devices explicitly support compatible passive PoE | Voltage range, polarity, cable length and power draw |
| Network complexity | The design is small and administration is handled by a RouterOS-capable engineer | Firewall rules, VLANs, VPN, queues and monitoring scope |
| Physical installation | Desktop or compact indoor placement is acceptable | Ventilation, cable routing, power source and environmental protection |
Verified technical information
| Brand | MikroTik |
|---|---|
| Product name | hEX PoE Lite |
| Product code | RB750UPr2 |
| Architecture and processor | MIPSBE architecture, QCA9531 single-core CPU at 650 MHz |
| Memory and storage | 64 MB RAM and 16 MB flash storage |
| Ethernet interfaces | Five 10/100 Ethernet ports |
| PoE input | Passive PoE, 8-30 V input range |
| PoE output | Passive PoE on Ether2-Ether5; voltage follows the power applied to the unit |
| PoE current guidance | Low-voltage PoE-out current limit 1 A; maximum total output 2 A. Endpoint and cable requirements must still be checked. |
| USB | One USB Type-A port, USB 2.0 class, up to 1 A current, with power-reset support |
| Operating system | RouterOS with Level 4 license |
| Dimensions | 113 × 89 × 28 mm |
| Cooling | Passive cooling |
| Included power accessories | 24 V 2.5 A power adapter and IEC cord, subject to regional package confirmation |
| Availability | Contact FourTeck for current UAE options, quantity and lead-time guidance |
Important PoE compatibility notice
The hEX PoE Lite uses passive PoE, not automatic standards-based 802.3af or 802.3at negotiation. Passive PoE can place voltage on the cable without the same type of powered-device detection used by active PoE systems. A mismatch may prevent the endpoint from starting or may damage equipment. Do not assume that every device marketed as “PoE” is compatible.
Before connecting any endpoint, confirm the accepted voltage range, polarity, pin arrangement, maximum current, cable length and total power budget. The output voltage is tied to the voltage supplied to the router, so power-source selection directly affects the powered ports. For mixed-vendor deployments, standards-based PoE switches or injectors may be the safer choice.
FourTeck can review the intended endpoint list and advise whether this model, another MikroTik device or a separate managed PoE switch should be considered.
Three capabilities that matter in real deployments
RouterOS control for a small edge
RouterOS gives administrators access to firewall policies, network address translation, DHCP services, static and dynamic routing options, queues, VLAN configuration, monitoring and remote administration features. This makes the hEX PoE Lite more flexible than an unmanaged five-port device.
The value depends on correct configuration. A small router can still be exposed by weak passwords, unnecessary services, outdated software or poorly designed firewall rules. Businesses should define who will administer the device, how configuration backups will be handled and how updates will be reviewed.
Power and data through selected cables
Where endpoints are compatible, Ether2 through Ether5 can deliver passive PoE while carrying network traffic. This can be useful for compact wireless links, small access points or other devices designed for low-voltage passive power.
The operational benefit is simpler cabling, but power design remains essential. The router is not a universal PoE switch, and buyers must calculate combined load rather than evaluate each port in isolation. Long cable runs and conductor quality can also affect voltage at the endpoint.
Compact deployment with clear limits
The small enclosure and low standalone power consumption suit installations where space and power are limited. Passive cooling also avoids fan noise and moving parts.
The same compact design should not be interpreted as unlimited capacity. Five Fast Ethernet ports, a single-core processor and 64 MB of RAM make it a product for carefully sized workloads. Heavy VPN encryption, complex filtering, high packet rates or future Gigabit requirements should prompt a comparison with more capable alternatives.
Purchase and deployment journey
Define the network
List WAN speed, LAN devices, VLANs, VPN needs and management expectations.
Audit powered devices
Record voltage, PoE type, current draw, connector expectations and cable distance.
Confirm model fit
Compare Fast Ethernet and passive PoE limits with present and future requirements.
Build the quotation
Include device quantity, power accessories, cabling and configuration scope.
Configure and test
Update RouterOS, secure access, apply policies and test every powered endpoint.
Ideal business environments and use cases
Small branch connectivity
A low-traffic branch that needs a few wired connections, DHCP, firewall rules and remote administration may use this model when 100 Mbps port speed is adequate.
Retail counters and kiosks
Compact retail points may require a router for a payment terminal, workstation, printer and one compatible powered network device. Segmentation and security rules should be planned carefully.
Wireless backhaul support
The passive PoE ports can support selected MikroTik or other compatible radios, subject to exact voltage and power checks. Outdoor protection and surge planning remain separate requirements.
Training and technical labs
The RouterOS feature set can be useful for learning routing, firewalling and network management in a compact lab, provided performance expectations remain realistic.
Temporary project networks
A temporary office, event desk or project site may use the device for modest wired connectivity where installation simplicity matters and the endpoint list is controlled.
Not for every camera system
Many IP cameras expect standards-based 802.3af/at power and higher aggregate switching capacity. Camera compatibility must be verified rather than inferred from the word PoE.
Integration and operational considerations
A successful installation begins with an accurate topology. Decide whether the hEX PoE Lite will act as the internet edge, an internal router, a small managed switch-router or a power source for compatible endpoints. These roles place different demands on CPU, memory, interface layout and security configuration.
When it is used as the internet gateway, the subscribed WAN speed should be compared with the 100 Mbps physical interface limit and the performance impact of firewall, queue and VPN rules. Vendor laboratory results represent specific test conditions and should not be treated as a guaranteed result for every real configuration.
For VLAN deployments, document tagged and untagged ports, management access, DHCP scopes and inter-VLAN policy. For remote management, avoid exposing unnecessary services directly to the internet. Use secure administration practices, strong credentials, restricted source addresses and current RouterOS releases appropriate to the device architecture.
Power planning should include the input adapter, total attached load, cable quality, distance and environmental conditions. Where endpoints need active PoE negotiation, higher voltage, Gigabit links or larger power budgets, use a suitable managed PoE switch or another router model instead of adapting the hEX PoE Lite beyond its intended design.
Questions to resolve before ordering
Procurement checklist
✓ Confirm model RB750UPr2
✓ Required quantity and destination
✓ WAN and LAN speed expectations
✓ Number of powered endpoints
✓ Endpoint PoE type and voltage range
✓ Total current and cable distance
✓ RouterOS configuration requirements
✓ VLAN, firewall and VPN scope
✓ Power adapter and plug requirements
✓ Mounting and environmental conditions
✓ Installation and testing responsibility
✓ Warranty and lead-time confirmation
How FourTeck can assist
FourTeck can help translate a basic product request into a workable small-network bill of materials. The review can include interface count, expected traffic, endpoint power requirements, cabling, configuration scope and whether the hEX PoE Lite is the right model or simply the lowest-cost item under consideration.
For businesses that already have a network diagram, FourTeck can review the intended WAN, LAN and powered-device connections and identify questions that should be resolved before purchase. For new deployments, assistance can include product comparison, quotation coordination, RouterOS configuration planning, installation scope and handover requirements.
Explore related business network products, discuss configuration and installation services, or send the requirement to FourTeck for review.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the MikroTik hEX PoE Lite. Supply can depend on quantity, regional packaging, vendor lead time and the exact accessories requested. A quotation should identify whether the requirement is hardware only or includes configuration, installation, testing, documentation or support coordination.
For projects across Dubai, Abu Dhabi, Sharjah and Ajman, FourTeck can discuss requirement review, delivery coordination and implementation scope after the destination, quantity and network design are confirmed. No deployment date or stock position should be assumed until it appears in the approved quotation.
GCC Availability
Businesses planning small-network deployments in GCC markets can contact FourTeck for product review, quotation coordination and regional requirement guidance. The hEX PoE Lite may be considered for projects in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain or Oman when its Fast Ethernet capacity and passive PoE method match the design. Availability, service scope, delivery schedules and vendor lead times can vary by country, model quantity and destination. Buyers should provide the exact model, required quantity, destination country, expected deployment date, endpoint list and any configuration or installation expectations. FourTeck can then help determine whether the RB750UPr2 is appropriate, whether accessories are needed and whether a different router or standards-based PoE solution should be evaluated. Regional power, cabling and compliance requirements should be confirmed as part of the final procurement process.
Africa Availability
Organisations evaluating MikroTik equipment for African projects can request assistance with model selection, power compatibility, accessory planning, configuration scope and procurement coordination. The destination may be in East Africa, West Africa, Southern Africa or another regional market, and each project should be reviewed against local power arrangements, shipping conditions, endpoint compatibility and implementation resources. Availability can depend on the destination country, quantity, vendor lead time, regional package, required power accessories and delivery method. Buyers should share the exact requirement, deployment location, preferred schedule and any remote or on-site support expectations. FourTeck can help compare the hEX PoE Lite with alternatives and coordinate guidance through its Africa technology channel, including selected assistance for Kenya projects and Uganda requirements.
Related products and services to consider
Gigabit MikroTik router options
Consider a Gigabit model where WAN or LAN traffic may exceed 100 Mbps.
Standards-based PoE switches
Use an 802.3af/at capable switch where connected endpoints need active PoE negotiation.
RouterOS configuration
Define firewall, DHCP, VLAN, routing, VPN, monitoring and backup requirements.
Network installation support
Plan cabling, endpoint power checks, device placement, testing and documentation.
Frequently asked questions
Does the MikroTik hEX PoE Lite have Gigabit ports?
No. The RB750UPr2 has five 10/100 Ethernet ports. Buyers needing Gigabit connectivity should compare another model.
Which ports provide PoE output?
Ether2 through Ether5 support passive PoE output. Ether1 can accept passive PoE input.
Can it power any PoE camera or access point?
No. The endpoint must accept compatible passive PoE at the available voltage and within the power budget. Many devices require 802.3af/at and may not be compatible.
Is RouterOS included?
Yes. The device is supplied with RouterOS and a Level 4 license. Buyers should update it to an appropriate current stable release and secure the configuration.
Is it suitable for a 1 Gbps internet connection?
No, not when the objective is to use the full Gigabit service speed, because its Ethernet interfaces are limited to 100 Mbps.
Can FourTeck configure the router?
Configuration assistance can be discussed as part of the quotation, including firewall, DHCP, VLAN, routing, VPN and management requirements.
What information is needed for a quote?
Provide quantity, destination, WAN speed, number of users, endpoint list, PoE requirements, configuration scope and preferred delivery schedule.
Is the product currently available in Dubai?
Availability should be confirmed with FourTeck because stock position, quantity and vendor lead time can change.
What warranty applies?
Warranty terms can depend on the supply channel and region. Request current warranty guidance in the formal quotation.
Confirm the network and PoE design before purchase
Share the endpoint list, bandwidth target, required quantity and installation location. FourTeck can help verify whether the hEX PoE Lite is the right fit and prepare a requirement-based quotation.
