Outdoor fiber continuity
MikroTik FTC21-UPS in Dubai, UAE
A managed, weatherproof fiber-to-copper edge device with integrated short-duration battery support, 2.5G SFP connectivity, dual Gigabit Ethernet and PoE-out for selected downstream equipment.
Confirm optics, PoE demand, cable routes and site power before purchase.
Fiber uplink flexibility
Local copper connectivity
Available on Ether2
Built for exposed locations
Direct answer for buyers
The FTC21-UPS is a compact outdoor media-conversion and edge-power device for projects that need fiber access converted to copper Ethernet while maintaining the connection through short input-power interruptions. It is most suitable for CCTV, WISP, building-perimeter, smart-site and remote cabinet applications. Before proceeding, buyers should verify the optical module, fiber wavelength and connector, input source, PoE-powered device demand, grounding, surge protection, mounting position and the length of interruption the site must tolerate. The integrated battery reduces nuisance reboots; it does not replace a properly engineered long-runtime UPS system.
What the FTC21-UPS does
The unit bridges an SFP-based fiber connection to two copper Gigabit Ethernet ports. Ether2 can provide standards-based PoE-out for a compatible endpoint such as a camera, radio or low-power edge device, subject to the available power budget and installation design. Its most distinctive feature is the integrated battery. During a short drop in external power, the battery can maintain operation long enough to avoid unnecessary Ethernet and optical link renegotiation. In distributed networks this can reduce avoidable service interruptions caused by momentary utility fluctuations, generator transitions or brief site-level power events.
Because it is an edge accessory rather than a full routing appliance, it should be selected as part of a wider network design. VLANs, routing, security policies, monitoring and upstream resilience may depend on the connected switch, router, camera platform or service-provider architecture. FourTeck can review the complete path rather than treating the converter as an isolated purchase.
Who should consider it
Organisations operating outdoor cameras, wireless access points, small telecom enclosures, remote gates, industrial yards, building rooftops or perimeter systems may consider this model when fiber is preferred for distance or electrical isolation and copper Ethernet is required at the endpoint.
Who may need another design
Sites requiring hours of backup, multiple high-power PoE loads, routing, advanced firewalling or many Ethernet ports should use a larger UPS, PoE switch and suitable router. The FTC21-UPS should not be treated as a universal replacement for those components.
Business problems it can help address
Momentary power loss
Integrated battery support helps the converter and attached link remain stable through short disruptions, reducing avoidable reboots.
Fiber-to-copper handoff
The device provides a practical transition where the long-distance or backbone segment uses fiber but the local endpoint expects RJ45 Ethernet.
Outdoor installation
An IP67-rated enclosure supports deployment in exposed environments when mounting, cable glands, grounding and local installation rules are followed.
Edge-device powering
PoE-out on Ether2 can reduce the need for a separate local power adapter for a compatible downstream device.
Suitability matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Outdoor fiber handoff | A weatherproof fiber-to-copper endpoint is needed. | SFP type, wavelength, distance and connector. |
| Short power continuity | The goal is to ride through brief power events. | Expected outage duration and battery condition policy. |
| PoE edge device | One compatible 802.3af/at load is connected to Ether2. | Voltage, class, cable loss and total power budget. |
Power, battery and PoE planning
The embedded battery is valuable when the network experiences short interruptions, but runtime varies with operating conditions, attached load, battery age and environmental temperature. A buyer should therefore define the operational objective clearly: preventing a link reset during a generator transfer is different from powering a remote camera for several hours. Where longer continuity is required, the broader site should include a correctly sized UPS, protected DC plant or centralised power architecture.
PoE-out must also be checked as part of the complete power calculation. Cable length, conductor quality, ambient temperature and the powered device’s peak consumption all affect the result. FourTeck can help review whether the planned endpoint is suitable and whether an alternative PoE switch, injector or local supply is more appropriate.
Optics and fiber compatibility
An SFP slot does not make every optical module automatically suitable. Buyers need to confirm single-mode or multimode fiber, connector type, wavelength, reach, digital diagnostics requirements and the far-end transceiver. A 2.5G-capable interface also requires the rest of the path to support the intended link mode. Existing patch panels, splice trays and fiber budgets should be considered before finalising the bill of materials.
Outdoor deployment quality
Weather resistance is only one part of a reliable outdoor installation. Correct orientation, sealed cable entry, drip loops, UV-resistant cabling, grounding, surge protection and safe access are equally important. The unit should be installed by qualified personnel in accordance with local electrical and building requirements. Cabinets, poles and mounting structures should be assessed for heat, vibration and maintenance access.
Purchase and deployment journey
- Define the endpoint: identify the camera, radio, controller or switch being connected.
- Confirm the fiber path: record fiber type, distance, connectors and far-end optics.
- Calculate power: document input source, PoE load and continuity expectation.
- Plan installation: agree mounting, weather sealing, grounding and surge protection.
- Prepare quotation: include converter, optics, cables, accessories and services.
- Commission and document: test link negotiation, PoE delivery, battery behaviour and monitoring.
Typical business environments
The FTC21-UPS may fit outdoor CCTV poles, gated facilities, warehouses, compounds, farms, hospitality properties, construction sites, campus perimeters and WISP access locations. It is especially useful where fiber reaches an exposed point and a small number of copper devices need connectivity. Suitability still depends on the environmental specification, local power quality and network topology.
Questions to resolve before ordering
- What exact SFP module and fiber patch lead are required?
- What is the peak and normal PoE demand of the downstream device?
- How long must the site remain operational during power loss?
- Is a separate surge protector or lightning-protection design required?
- Will the unit be pole mounted, wall mounted or placed inside another enclosure?
- What VLAN, management and monitoring arrangement is expected upstream?
Procurement checklist
☐ Exact model and quantity
☐ SFP type and quantity
☐ Fiber connector and distance
☐ Ethernet cable category
☐ PoE device model and power class
☐ Input-power source
☐ Required backup duration
☐ Mounting hardware
☐ Grounding and surge protection
☐ Installation scope
☐ Configuration and testing scope
☐ UAE delivery location
FourTeck assistance in the UAE
FourTeck can support requirement clarification, optical-module selection, power-budget review, bill-of-material preparation and quotation coordination. Installation and configuration can be discussed where the project needs mounting, cabling, commissioning or integration with an existing switch, router, CCTV platform or wireless network. Contact FourTeck to confirm current UAE availability because lead times may vary by quantity and vendor supply. Delivery and project coordination can be discussed after the exact requirement is confirmed.
Explore related network products, review available technology services, or contact the Dubai team.
Dubai, Abu Dhabi, Sharjah and Ajman coverage
FourTeck can coordinate product discussions and project requirements for organisations across Dubai, Abu Dhabi, Sharjah and Ajman. Buyers should provide the delivery location, site conditions, quantity, optical requirements and installation expectations so that the quotation reflects the actual deployment rather than only the converter itself.
GCC Availability
For GCC projects, FourTeck can assist with requirement review, model confirmation, optical and PoE accessory selection, quotation coordination and deployment planning. Organisations in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman should confirm the destination country, required quantity, fiber standard, connected load and target schedule. Product availability, service visits, vendor lead times and shipping arrangements can vary by market and project. For cross-border rollouts, it is helpful to standardise the optics, cabling and installation documentation while still checking local power, environmental and regulatory requirements. FourTeck can help structure the bill of materials and identify information that must be confirmed before procurement.
Africa Availability
FourTeck can also support organisations planning outdoor fiber endpoints in African markets, including selected projects in East Africa and wider regional deployments. Buyers should share the destination country, exact model, quantity, optical module, power source, mounting environment and support expectations. Fulfilment may depend on shipping arrangements, vendor lead time, local import conditions, power standards and the availability of qualified installation resources. For distributed CCTV, WISP or campus projects, a consistent design should be balanced with country-specific site conditions. Visit FourTeck resources for Africa technology coordination and Kenya project enquiries.
Related products and services
SFP modules
Select optics that match fiber type, distance, wavelength and far-end equipment.
Outdoor PoE switching
Consider a larger PoE switch where several powered devices or higher budgets are required.
Installation support
Plan mounting, fiber termination, grounding, testing and handover as part of the project scope.
Frequently asked questions
Is the FTC21-UPS a router?
No. It is primarily a managed fiber-to-copper edge converter with battery support and PoE-out. Routing and security services normally come from other network devices.
Can it provide long backup runtime?
The integrated battery is intended to maintain links during short interruptions. Long-duration continuity requires a separate, properly sized power solution.
Does it include an SFP module?
Included components should be confirmed in the current quotation. The required optic must match the fiber path and far-end device.
Which port supplies PoE?
Ether2 provides 802.3af/at PoE-out, subject to the available power budget and compatible endpoint.
Can it be installed outdoors?
The enclosure is rated IP67, but installation quality, sealing, grounding, surge protection and environmental limits must still be followed.
Is it suitable for CCTV?
It can suit a fiber-backed camera endpoint when the camera’s PoE requirements and the complete network design are compatible.
How do I request a quote?
Provide quantity, site location, fiber type, SFP requirement, downstream device model and expected backup objective.
Is UAE stock guaranteed?
No. Contact FourTeck to confirm current availability, lead time and delivery coordination.
Build the correct outdoor fiber bill of materials
Share your optics, PoE load, site power and installation details for a project-specific review.
Reviews
There are no reviews yet.