INDOOR ROUTERBOARD ENCLOSURE
MikroTik CA150 in Dubai, UAE
The MikroTik CA150 is a purpose-built black aluminium case for selected bare-board MikroTik routers. It gives compatible RouterBOARD hardware a neat indoor enclosure and includes the installation set required for assembly. For an accurate order, the enclosure must be matched to the exact board model, revision, power arrangement and installation environment.
Ordering snapshot
Product code: CA150
Product type: Indoor enclosure
Material: Aluminium
Colour: Black
Important: RouterBOARD, power supply and RouterOS device are not represented as included.
Not an outdoor-rated housing
Black aluminium case
Assembly hardware is described as included
Confirm the precise RouterBOARD model
Direct answer for buyers
The MikroTik CA150 is an indoor black aluminium enclosure made to house specific MikroTik RouterBOARD products. Its purpose is physical protection, cleaner presentation and more practical mounting of a compatible bare board; it does not provide routing, switching, wireless or software functions by itself. It is most relevant to system integrators, network engineers and organisations purchasing a compatible board without a factory enclosure. Before proceeding, confirm the exact RouterBOARD model and revision, connector alignment, mounting location, power supply plan, ventilation conditions and whether any additional accessories are required. FourTeck can help assemble the requirement into a clear quotation and check current supply options for Dubai and the UAE.
What the CA150 does
A bare RouterBOARD can be convenient for embedded, laboratory or custom installation work, but it still needs suitable physical protection. The CA150 provides a formed metal case intended to surround supported boards and organise their ports within a defined enclosure. It helps reduce casual contact with the printed circuit board, keeps the finished installation visually consistent and supports a more deliberate placement on a desk, shelf, wall or inside a larger equipment area, subject to the installation design.
The enclosure should be treated as a mechanical accessory. It does not increase processor speed, Ethernet throughput, storage, memory or RouterOS functionality. It also does not convert an indoor board into an outdoor product. Its value lies in matching the correct board and providing a suitable protective housing for normal indoor conditions.
Who should consider it
The CA150 may be appropriate when a business has selected an RB450, RB450G or RB850Gx2 board and needs the matching case. It can also be evaluated for an RB450Gx4 deployment because MikroTik describes that board as using the same form factor as earlier RB450 and RB850 products; nevertheless, buyers should ask for explicit compatibility confirmation for the exact supplied revision.
Typical buyers include managed service providers, system integrators, ISP engineering teams, training laboratories, small-business IT departments and technical users building a compact wired routing appliance. It is less suitable when the requirement calls for outdoor weather resistance, sealed industrial protection, a complete ready-to-run router, rack mounting without adaptation, or an enclosure for an unrelated RouterBOARD family.
Business challenges the enclosure helps address
Exposed circuit board
A compatible RouterBOARD supplied without a case can be vulnerable to accidental contact, loose objects and untidy handling. A matched enclosure provides a defined physical boundary.
Unfinished installation
The case creates a more presentable indoor device for branches, labs and technical spaces where exposed electronics would be inappropriate.
Unclear component matching
A structured compatibility review helps prevent an enclosure from being ordered for the wrong board, connector layout or generation.
Fragmented bill of materials
FourTeck can help buyers separate the case, RouterBOARD, power arrangement, cables and services so the quotation reflects the complete requirement.
Product-fit matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Indoor housing for a bare board | The selected RouterBOARD uses the CA150-compatible form factor | Exact model, hardware revision and port alignment |
| Compact branch-router assembly | A supported RB450/RB850-family board has already been selected | Power supply, cabling, ventilation and mounting plan |
| Outdoor or dusty environment | Generally not the intended fit | Required IP protection, temperature, dust and moisture exposure |
| Complete working router | Only when ordered together with all required components | Board, license, power components and configuration scope |
Verified product information
| Brand | MikroTik |
|---|---|
| Product name | CA150 |
| Product code | CA150 |
| Product type | Indoor RouterBOARD enclosure |
| Material | Aluminium |
| Colour | Black |
| Purpose | Indoor use |
| Installation hardware | Described by the manufacturer as an installation set |
| Confirmed compatible models | RB450, RB450G and RB850Gx2 |
| Related form-factor consideration | RB450Gx4 is listed as a related product and uses the same enclosure form factor; confirm exact compatibility before purchase |
| Power supply | Not confirmed as included; depends on the selected RouterBOARD package |
| RouterBOARD device | Not represented as included with the enclosure |
| Availability | Contact FourTeck for current UAE options, quantity and lead time |
Compatibility and scope notice
An enclosure order should never be based only on the general RouterBOARD family name. Port openings, indicator positions, board dimensions, mounting points and hardware revisions can affect suitability. The official CA150 information directly names the RB450, RB450G and RB850Gx2. The RB450Gx4 is associated with the same enclosure form factor, but the quotation should still state the exact board and revision to avoid ambiguity.
The CA150 is not a weatherproof, climate-controlled or sealed industrial cabinet. Where the equipment will be installed in a warehouse, outdoor kiosk, ceiling void, high-dust room or hot communications cupboard, the wider environmental design must be reviewed. A larger protected cabinet, suitable ventilation, grounding practices and controlled access may be required independently of the CA150.
A practical purchase journey
Identify the board
Share the full MikroTik model code, hardware revision where available, and quantity. A photograph of the bare board or existing installation can also help clarify the requirement.
Confirm the environment
State whether the unit will be used on a desk, wall, shelf, rack tray or inside another cabinet. Indoor temperature, airflow, dust and access should be considered.
Complete the components
Check the board, power supply, cables, enclosure, mounting arrangement, storage card and any required network accessories as separate bill-of-material items.
Define service scope
Decide whether the order is supply only or requires assembly, RouterOS configuration, migration, testing, labelling, documentation or installation coordination.
Request a quotation
FourTeck can review the final requirement, confirm current availability guidance and prepare a quotation based on destination, quantity and support expectations.
Physical protection without overstating the case
The principal capability of the CA150 is mechanical containment. A correctly assembled case can help prevent routine accidental contact with components, reduce the chance of loose objects resting directly on the board and make the device easier to handle as a finished unit. Aluminium also gives the enclosure a rigid structure compared with leaving the circuit board exposed.
This should not be interpreted as complete protection from water, conductive dust, impact, tampering or severe heat. The official purpose is indoor use. Buyers responsible for a demanding site should assess the entire installation environment rather than relying on the small enclosure alone. Where necessary, the CA150-equipped device can be positioned inside a larger lockable cabinet with suitable ventilation and cable management.
Cleaner integration into a network space
A dedicated enclosure makes a bare-board router easier to present and organise in a branch, laboratory or technical room. Ports remain accessible through the case openings, while the board is no longer an exposed assembly. This can simplify labelling, cable routing and asset identification when several small network devices share a shelf or cabinet.
Good integration still depends on planning. Ethernet cables should have enough bend radius, power leads should not place strain on connectors, and the case should not be buried beneath materials that restrict airflow. The network engineer should also preserve access for service, reset procedures and storage media where relevant to the chosen RouterBOARD.
Flexible component procurement
MikroTik RouterBOARD products are sometimes selected as separate boards so integrators can control the enclosure, power and installation method. The CA150 supports that modular procurement approach. A buyer can specify the case only, or request it alongside a compatible board and other components.
Modularity also increases the need for careful scope control. The quotation should identify what is included rather than assuming that a product code represents a complete operational router. FourTeck can help separate supply items from optional assembly, configuration and deployment services so procurement teams can compare quotations accurately.
Ideal business environments and use cases
Branch connectivity appliance
A supported RouterBOARD can be assembled into the CA150 for an indoor branch routing role, provided the selected board performance, RouterOS configuration and power plan meet the site requirement.
Network laboratory
Training centres and technical teams can use the enclosure to keep compatible lab boards protected and easier to move between benches without treating the case as rugged transport packaging.
Custom cabinet integration
System builders may place the enclosed board inside a larger communications cabinet, subject to power, airflow, grounding, cable access and maintenance design.
Replacement enclosure
The CA150 may be requested when an existing compatible device needs a replacement case, but all installation hardware and board condition should be checked before reassembly.
Operational and installation considerations
Assembly should be performed with the board powered off and disconnected. Suitable anti-static handling practices are sensible whenever exposed electronics are being fitted into a metal enclosure. The board must sit correctly on its mounting points without forced alignment, and screws should be tightened securely without damaging the PCB. Ports, LEDs and any reset access should line up with the enclosure openings before power is applied.
The power method is determined by the RouterBOARD rather than the case. Depending on the selected board, power may be supplied through a DC input, passive PoE or standards-based PoE options. Buyers should never infer voltage or PoE compatibility from the enclosure model. The board documentation and power-source specifications must be checked together. When a power adapter is required, its plug type and regional suitability should also be included in the procurement review.
Ventilation deserves attention even in a small indoor deployment. The case should be installed where ambient temperature remains within the board’s supported operating range and where air can circulate. It should not be placed directly on heat-producing equipment, covered by paperwork or installed in a sealed space without thermal assessment. Cable entry and exit paths should avoid sharp bends and connector strain.
Where the RouterBOARD carries production traffic, configuration backup and change-control procedures are more important than the enclosure itself. FourTeck can discuss optional RouterOS configuration, migration planning, labelling and documentation. These services should be explicitly included in the quotation because the CA150 product code alone refers to the physical enclosure, not a configured networking service.
Buyer questions to resolve before ordering
Provide the complete model code and, where possible, the hardware revision or a photograph of the board label.
Describe heat, humidity, dust, water exposure, tampering risk and whether the unit will sit inside another cabinet.
Confirm input voltage, PoE method, adapter requirements and whether a regional power cord is needed.
Clarify desk, wall, shelf, rack tray or cabinet placement and any additional brackets or hardware.
List the board, enclosure, power supply, storage, cables and configuration services separately.
Availability, shipping and project coordination can vary with quantity, destination and vendor lead time.
Procurement checklist
- Confirm the exact MikroTik board model and hardware revision.
- Specify the required number of CA150 enclosures.
- Check that the installation set is included in the quoted package.
- Define whether the RouterBOARD itself is required.
- Confirm the power supply or PoE arrangement separately.
- Review indoor temperature, airflow, dust and moisture conditions.
- State the mounting method and any larger cabinet requirement.
- Check access to Ethernet ports, LEDs, reset and storage media.
- Decide whether assembly and testing are required.
- Add RouterOS configuration or migration scope where needed.
- Request warranty guidance for each separately supplied component.
- Confirm delivery destination, target schedule and contact details.
FourTeck requirement review
FourTeck can review the intended board, quantity and deployment environment before the quotation is prepared. This is particularly useful when procurement teams have received only a RouterBOARD code and are unsure whether the case, power supply or mounting components are separate items. The review can also identify whether configuration or installation assistance should be scoped.
Explore broader networking product options or discuss the requirement through the FourTeck contact team.
Configuration and installation scope
A physical case does not define how the finished router will operate. Where a complete solution is required, the quotation can distinguish enclosure assembly from RouterOS configuration, VLANs, routing, firewall policy, VPN setup, changeover planning, documentation and onsite coordination. Each service depends on the network design and should be agreed before deployment.
See available technology services or read more about FourTeck.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the MikroTik CA150. Supply can depend on quantity, vendor lead time, the requested board bundle and whether the order requires additional accessories or services. Buyers should provide the exact RouterBOARD model, number of enclosures, delivery location and expected project schedule. Delivery and project coordination can be discussed after the requirement is confirmed. Where assembly, installation or configuration is needed, that scope should be included in the quotation rather than assumed to form part of the case price.
Dubai, Abu Dhabi, Sharjah and Ajman coverage
FourTeck can coordinate enquiries for businesses and technical teams across Dubai, Abu Dhabi, Sharjah and Ajman. The process begins with confirmation of the product code, compatible RouterBOARD, quantity and delivery or project location. For multi-site requirements, buyers should identify whether each location needs only the CA150 enclosure or a complete assembled and configured router. Site access, installation timing and configuration standards may differ across branches, so they should be documented before quotation. Current availability and any service coordination remain dependent on the confirmed requirement.
GCC Availability
FourTeck can assist organisations planning MikroTik component purchases across GCC markets, including the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman. For the CA150, regional coordination starts with a clear statement of the compatible RouterBOARD model, enclosure quantity, destination country and whether power components, assembly or RouterOS services are also required. Product availability, delivery schedules, service visits, project scope and vendor lead times can vary by country, model, quantity and requirement. Licensing is normally associated with the RouterBOARD rather than the enclosure, but it should still be verified when a complete device is being sourced. Buyers should share the destination, deployment location, target timeline, required accessories and any installation expectations so FourTeck can prepare suitable guidance. For Kuwait-related coordination, the FourTeck Kuwait resource may also be relevant. No local stock, customs outcome or fixed delivery date should be assumed until the order details are reviewed.
Africa Availability
Businesses and integrators planning MikroTik deployments in Africa can contact FourTeck for product and bill-of-material guidance. The CA150 is a small enclosure, yet a regional order may involve compatible RouterBOARD hardware, power supplies, cables, configuration requirements and replacement quantities. Availability and fulfilment can depend on the destination, product quantity, board model, power requirements, shipping arrangements, vendor lead time and local project conditions. Buyers should provide the destination country, exact RouterBOARD code, required number of cases, preferred deployment schedule and any assembly, installation or support expectations. FourTeck can help review these details and coordinate an appropriate quotation without implying immediate shipment or country-wide onsite coverage. Organisations in East Africa may consult the Kenya technology resource or Uganda technology resource, while broader regional enquiries can use the FourTeck Africa website. Customs, regulatory, delivery and installation outcomes must be confirmed for each destination.
Related products and services to evaluate
Compatible RouterBOARD
Confirm whether an RB450, RB450G, RB850Gx2 or another form-factor-compatible board is part of the requirement. Do not assume the board is packaged with the case.
Power components
Select the adapter or PoE arrangement using the chosen board specifications. Voltage and PoE support are not determined by the CA150 enclosure.
Assembly and testing
Where required, request controlled assembly, visual inspection, power-on checks and port verification as a separate service scope.
RouterOS configuration
Routing, VLAN, firewall, VPN and management settings depend on the selected board and network design. Configuration should be quoted separately.
Why businesses contact FourTeck
The CA150 is straightforward as a physical product, but its successful use depends on accurate component matching. Businesses contact FourTeck to clarify the RouterBOARD model, distinguish included and optional items, review the installation environment and assemble a complete bill of materials. This can prevent a procurement team from receiving only an enclosure when it expected a functioning router, or from ordering a case that does not match the intended board.
FourTeck can also help coordinate quotation details, compatible accessories, power requirements and optional technical services. For replacement projects, the team can discuss whether the existing board remains suitable or whether a newer complete router should be considered. For new deployments, configuration, migration and documentation requirements can be identified before the order is finalised. Assistance is based on the confirmed scope and does not imply an unsupported guarantee of compatibility, stock or project timing.
Frequently asked questions
Is the MikroTik CA150 a router?
No. It is an indoor aluminium enclosure for compatible RouterBOARD hardware. The board, power supply, configuration and network functionality are separate considerations.
Which models are confirmed to fit the CA150?
MikroTik directly identifies the RB450, RB450G and RB850Gx2. The RB450Gx4 uses the same enclosure form factor and is listed as related, but exact compatibility should be confirmed for the supplied revision.
Does the enclosure include an installation set?
The manufacturer describes the CA150 as a black aluminium indoor case with an installation set. The quoted package should still be checked to confirm its contents.
Can the CA150 be installed outdoors?
It is specified for indoor use. Outdoor, wet, dusty or harsh environments require a separately assessed protective solution.
Is a power supply included?
A power supply is not confirmed as part of the enclosure. Select power components according to the exact RouterBOARD and procurement package.
Does the CA150 include RouterOS licensing?
No license should be assumed from the enclosure code. RouterOS licensing is associated with the selected MikroTik device or software arrangement.
Can FourTeck assemble the board into the case?
Assembly and testing can be discussed as an optional service. The required board, power method, quantity and handover expectations should be stated in the quotation request.
What information is needed for a quote?
Provide the exact board model, enclosure quantity, destination, required accessories, mounting environment, target schedule and whether configuration or installation is needed.
How can I confirm UAE availability?
Send the requirement to FourTeck for a current availability check. Lead time can depend on quantity, vendor supply and whether the order is case-only or part of a larger solution.
Confirm the correct enclosure before ordering
Share your RouterBOARD model, quantity and deployment environment. FourTeck can review compatibility, related components and current Dubai or UAE availability before preparing a quotation.
Reviews
There are no reviews yet.