Managed access switching with integrated PoE+
Ubiquiti Standard 24 PoE USW-24-POE in Dubai, UAE
The USW-24-POE gives growing businesses a practical way to consolidate wired connectivity, power compatible endpoints and manage switch settings through the UniFi Network platform. Its 24 Gigabit RJ45 ports, 16 PoE+ ports, two 1G SFP uplinks and quiet fanless design make it a strong fit for structured office and branch deployments where predictable capacity matters more than high-speed 10G aggregation.
Plan the right configuration
Share your device count, PoE load, rack location and uplink requirement for a more accurate quotation.
Access ports for wired devices
IEEE 802.3af/at output
Shared across powered endpoints
Fibre or copper uplink options
Quiet rack deployment
Direct answer for buyers
The Ubiquiti Standard 24 PoE USW-24-POE is a managed Layer 2 UniFi switch built for business access networks. It is mainly used to connect desktops, printers, wireless access points, IP phones, cameras and other Ethernet devices while supplying PoE+ power to compatible endpoints on 16 ports. It is most suitable for small and mid-sized offices, branches, retail locations and similar sites that need a single 1U switch with quiet operation. Before proceeding, confirm the total PoE demand, required number of powered ports, uplink speed, SFP module type, rack ventilation, management platform and any installation or configuration services.
What the switch does
The USW-24-POE acts as the wired access layer for a UniFi-managed network. It aggregates endpoint traffic, applies Layer 2 controls, supports VLAN-based segmentation and supplies power to compatible devices without requiring a separate electrical outlet at every endpoint. This can simplify cabling for ceiling-mounted access points, IP telephones and selected surveillance devices.
Its 24 RJ45 interfaces operate at 10/100/1000 Mbps. Ports 1 through 16 provide PoE or PoE+ output, while ports 17 through 24 are data-only. Two 1G SFP interfaces can be used for fibre links or supported SFP copper modules, depending on the network design.
Who it suits
This model suits buyers who need moderate port density and a controlled PoE load rather than a large high-power PoE deployment. Typical users include professional offices, clinics, training centres, hospitality sites, retail stores, warehouses, schools and distributed branches.
It may not be the right choice where all 24 ports must deliver PoE, where several high-draw PoE devices will be connected, where 10G uplinks are required, or where advanced Layer 3 switching is a core requirement. In those cases, a higher-tier UniFi switch should be evaluated.
Business challenges this model helps address
Too many separate power adapters
PoE+ allows compatible access points, phones and cameras to receive power and data over one Ethernet cable, reducing adapter clutter and improving central power planning.
Limited visibility across switch ports
UniFi Network management provides central configuration and monitoring, helping administrators review connected devices, VLAN assignments, port status and PoE usage.
Noisy equipment near users
The fanless design supports quieter operation when the switch is installed in a suitable rack or communications area with appropriate airflow.
Unstructured branch expansion
Twenty-four Gigabit access ports create a clear foundation for adding users, printers, access points and other networked equipment without relying on multiple small unmanaged switches.
Product-fit decision matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Powered endpoints | Up to 16 devices need PoE/PoE+ and the combined load stays within 95W. | Per-device wattage, startup draw and future additions. |
| Access port count | A maximum of 24 copper Gigabit connections is appropriate. | Spare ports required for growth and patch-panel design. |
| Uplinks | Two 1G SFP links meet aggregation or building-link needs. | Fibre type, distance, module compatibility and whether 10G is needed. |
| Management | The organisation uses or plans to use UniFi Network. | Controller hosting, adoption method, admin access and backup process. |
Verified technical information
| Brand | Ubiquiti |
|---|---|
| Product / Model | Standard 24 PoE / USW-24-POE |
| Product Type | Managed Layer 2 PoE switch |
| RJ45 Ports | 24 × 10/100/1000 Mbps |
| PoE Ports | 16 × PoE+; up to 32W per PoE+ port, subject to total budget |
| Total PoE Availability | 95W shared budget |
| SFP Ports | 2 × 1G SFP |
| Switching Capacity | 52 Gbps |
| Non-Blocking Throughput | 26 Gbps |
| Forwarding Rate | 39 Mpps |
| Form Factor | 1U rack mount, fanless |
| Dimensions | Approximately 442 × 200 × 44 mm |
| Weight | Approximately 3.0 kg without rack brackets |
| Power | 100–240V AC, 50/60 Hz; internal 120W power supply |
| Display | 1.3-inch touchscreen LCM |
| Operating Temperature | -5°C to 40°C |
| Management | UniFi Network application; current vendor requirements should be confirmed |
PoE, compatibility and design dependencies
The 95W figure is a total switch budget, not a guarantee that all 16 PoE+ ports can simultaneously deliver their maximum per-port output. A proper design should total the expected wattage of every powered device and leave operating headroom. Devices such as high-performance access points, PTZ cameras or units with heaters, infrared illumination or USB accessories can draw more power than basic phones and compact cameras.
SFP modules, fibre patch leads, rack accessories, surge protection, UPS equipment and structured cabling may be separate requirements. Module compatibility, optical wavelength, fibre mode and link distance should be checked before purchase. The switch itself is intended for indoor installation. Outdoor cable runs require appropriate cable, grounding and protection practices.
A practical purchase and deployment journey
Count endpoints
Document wired devices, identify which need power and reserve ports for growth.
Calculate PoE load
Add typical and peak wattage, then retain sensible headroom within the 95W budget.
Choose uplinks
Confirm copper or fibre, SFP type, distance and whether 1G capacity is adequate.
Plan management
Decide where UniFi Network will run and how adoption, backups and admin access will be handled.
Install and validate
Rack the switch correctly, patch endpoints, configure VLANs and test power and traffic behaviour.
Central management and operational visibility
The strongest reason to select this switch is often not the port count alone but its role in a wider UniFi environment. Through UniFi Network, administrators can adopt the switch, name ports, apply network profiles, review device connections, inspect PoE usage and maintain a consistent configuration approach across multiple UniFi switches and access points. This is particularly useful for businesses that want a single operational view rather than separate management interfaces for each device.
Management convenience still depends on good operational discipline. The controller or gateway hosting UniFi Network should be maintained, backed up and protected with suitable administrator access controls. Firmware changes should be reviewed and scheduled rather than applied without consideration to business hours and dependencies.
PoE planning for real endpoint loads
A PoE switch should be selected by total load, not just by the number of PoE-labelled ports. The USW-24-POE can be an efficient choice when a site has a mixed endpoint population: for example, several access points, a group of phones and a limited number of cameras. It becomes less suitable when nearly every powered endpoint has a high draw or when a major expansion is expected.
FourTeck can help create a simple power schedule that records device model, maximum draw, port assignment and planned reserve. This prevents common procurement errors, such as assuming 16 PoE+ ports automatically means 16 devices can each receive 32W at the same time.
Quiet access switching for offices and branches
Fanless operation can be valuable in offices, studios, clinics and training rooms where equipment noise is undesirable. The compact depth also supports many standard communications racks. However, fanless does not mean ventilation can be ignored. The switch should not be stacked directly with other fanless units, blocked by loose cabling or installed in an enclosure that traps heat. Rack layout, ambient temperature and neighbouring equipment should be considered during installation.
Ideal environments and use cases
Professional offices
Connect staff workstations, printers, phones and ceiling access points while separating departments or guest services with VLANs.
Retail and hospitality
Support point-of-sale terminals, Wi-Fi access points, back-office devices and a controlled number of compatible cameras.
Schools and training centres
Provide structured access connectivity for classrooms, administration areas and shared wireless infrastructure.
Branch networks
Standardise switching across distributed sites that use UniFi management and do not require 10G uplinks at the access layer.
Questions to resolve before ordering
Procurement checklist
☐ Confirm exact model USW-24-POE
☐ Confirm required quantity
☐ Record all wired endpoint counts
☐ Calculate the combined PoE requirement
☐ Reserve ports and PoE capacity for growth
☐ Confirm 1G uplink suitability
☐ Select compatible SFP modules and fibre type
☐ Confirm rack space and ventilation
☐ Review AC power and UPS requirements
☐ Define UniFi Network hosting
☐ Document VLAN and port-profile requirements
☐ Include installation and configuration scope where needed
FourTeck planning and quotation assistance
FourTeck can help buyers move from a product name to a complete, practical bill of materials. Assistance can include confirming whether the USW-24-POE fits the port and power requirement, reviewing endpoint wattage, identifying uplink media, discussing rack and UPS needs, defining installation tasks and preparing configuration requirements. This reduces the risk of ordering a switch that has enough ports but insufficient PoE capacity or unsuitable uplink capability.
Explore business networking products, review available installation and configuration services, or contact FourTeck with your requirement.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the Ubiquiti Standard 24 PoE. Availability may depend on quantity, regional supply, vendor lead time and the exact accessories required. Delivery and project coordination can be discussed after the bill of materials is confirmed. Installation and configuration should be included in the quotation when required rather than assumed to be part of hardware supply.
Dubai, Abu Dhabi, Sharjah and Ajman coverage
Businesses in Dubai, Abu Dhabi, Sharjah and Ajman can request assistance with switch sizing, PoE calculations, SFP selection, rack planning, delivery coordination and deployment scope. The final quotation should state the switch quantity, accessories, configuration requirements, delivery location and any onsite or remote support expectations.
GCC Availability
FourTeck can assist GCC organisations evaluating the USW-24-POE for offices, branches, retail sites and distributed networks. Requirement review can cover port density, PoE load, compatible SFP modules, rack installation, UniFi Network management and configuration scope. Buyers in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman should share the destination country, required quantity, endpoint list, planned deployment location and expected timeline. Product availability, regional power cords, delivery schedules, service visits and vendor lead times can vary by country and quantity. No local inventory or fixed delivery date should be assumed until FourTeck confirms the exact requirement and prepares a destination-specific quotation. Regional projects can also include coordination for standard configurations and consistent bills of materials across several branch locations.
Africa Availability
Organisations planning UniFi switching projects in Africa can contact FourTeck for product evaluation, accessory selection, PoE budgeting, configuration planning and procurement coordination. This may be relevant for branch rollouts, education networks, hospitality sites, clinics and professional offices in East Africa and other regions. Availability and fulfilment depend on the destination, exact model, quantity, shipping arrangements, power requirements, vendor lead time and local project conditions. Buyers should provide the destination country, switch quantity, list of powered devices, preferred installation schedule and any remote or onsite support expectations. FourTeck resources for Africa technology projects, Kenya requirements and Uganda requirements can support regional planning. Shipment timing, customs outcomes and local service coverage must be confirmed for each project.
Related options and services
Higher-power PoE switching
Consider a higher PoE budget when many endpoints have substantial power demand or future expansion is likely.
10G uplink models
Evaluate Pro or Pro Max alternatives when access-switch aggregation requires SFP+ uplinks or advanced features.
SFP modules and fibre
Select optical or copper modules based on link distance, fibre type and verified compatibility.
Installation and configuration
Include rack mounting, patching, VLAN setup, adoption, firmware review and testing as defined project tasks.
Frequently asked questions
Does the USW-24-POE provide PoE on all 24 ports?
No. Sixteen RJ45 ports provide PoE+, while the remaining eight RJ45 ports are data-only.
Can every PoE+ port deliver 32W at the same time?
No. The maximum per-port capability is subject to the shared 95W total PoE budget, so the combined endpoint load must be calculated.
Does it have 10G SFP+ uplinks?
No. This model has two 1G SFP ports. Buyers needing 10G uplinks should compare higher-tier UniFi switches.
Is the switch fanless?
Yes. It uses fanless cooling, but it still requires correct rack placement, airflow and ambient temperature control.
What manages the USW-24-POE?
The switch is managed through the UniFi Network application. Controller hosting and current software requirements should be confirmed during design.
Are SFP modules included?
SFP modules should be treated as separate items unless the quotation specifically confirms inclusion.
Is this suitable for IP cameras?
It can power compatible PoE cameras, but the total camera wattage, cable distance and PoE budget must be checked.
Can FourTeck configure VLANs and port profiles?
Configuration support can be included in the project scope after the required networks, policies and management environment are defined.
How can I confirm Dubai availability?
Send FourTeck the exact model, quantity, delivery location and accessory requirements for current availability and lead-time guidance.
Confirm the switch, PoE load and complete bill of materials
Share your endpoint list, power requirements, uplink design, rack location and delivery destination. FourTeck can prepare a more accurate product and service quotation.
Reviews
There are no reviews yet.