Ubiquiti LocoM5 in Dubai, UAE
The Ubiquiti airMAX NanoStation M5 loco is a compact directional radio for outdoor point-to-point and point-to-multipoint connectivity. It is often considered when a business needs to extend a network between buildings, connect an outdoor device location, or create a focused wireless bridge without installing a new physical cable route.
Plan the link before ordering
Share the site distance, mounting height, line-of-sight conditions, quantity and expected network load. FourTeck can help review product fit and quotation scope.
Direct answer for buyers
The Ubiquiti LocoM5 is an outdoor 5 GHz airMAX radio with an integrated directional antenna. Its main role is to carry Ethernet traffic wirelessly between suitable locations, such as two offices, a warehouse and gatehouse, or a network cabinet and remote camera point. It is best considered by buyers who understand that outdoor wireless links depend on clear line of sight, correct alignment, compatible radios and a realistic link budget. Before proceeding, confirm the exact model, radio compatibility, expected traffic level, cable route, mounting position, passive PoE requirements, local frequency permissions and whether an older M-series platform is appropriate for the required lifecycle.
What the LocoM5 does
The unit converts an Ethernet connection into a focused 5 GHz outdoor wireless link. Because the radio and antenna are integrated into one enclosure, the deployment can be simpler than building a separate radio-and-antenna assembly. A pole-mount kit is included, allowing the device to be aimed toward a compatible remote radio.
In a typical bridge deployment, one radio operates at the network source and another compatible radio operates at the remote endpoint. The link can then carry data for switches, cameras, computers, access points, controllers or other Ethernet equipment. Final performance is affected by distance, channel width, interference, alignment, obstructions and configuration.
Who should consider it
The LocoM5 may suit small businesses, system integrators, farms, yards, workshops, logistics sites, schools, hospitality properties and project teams that need moderate-capacity connectivity across a clear outdoor path. It can also be relevant for connecting a remote IP camera cluster or extending a LAN to an outbuilding.
It should not be selected only because it is inexpensive. Buyers requiring Gigabit Ethernet, newer airMAX AC features, high aggregate throughput, heavy multipoint loading or a long supported lifecycle should compare newer alternatives before finalising the bill of materials.
Business problems this product can help address
No practical cable pathway
A focused outdoor link can connect separate structures where trenching fibre or copper is disruptive, slow or difficult. The physical route should still be assessed for mounting access, power and grounding.
Remote surveillance location
The radio may carry camera traffic from a gate, yard or perimeter point. Camera quantity, bit rate and recording design must be checked against realistic wireless capacity.
Temporary project connectivity
Construction compounds, events and temporary offices may need a removable link. The environment, mounting stability and local spectrum conditions remain important.
Network extension to an outbuilding
A workshop, store, security cabin or annex can be connected to the main LAN without treating the radio as a general indoor Wi-Fi access point.
Core capabilities in a compact outdoor format
The directional antenna concentrates energy toward the intended remote location and uses dual-linear polarisation.
UV-stabilised polycarbonate supports outdoor installation when the unit is correctly mounted and cabled.
Power and data share the Ethernet cable through the included 24 V, 0.5 A passive PoE adapter.
The platform is intended for managed outdoor wireless links rather than conventional client Wi-Fi coverage.
Product-fit decision matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Building-to-building bridge | There is stable, clear line of sight and moderate traffic demand. | Distance, mounting height, Fresnel clearance and compatible remote radio. |
| Camera backhaul | Combined camera bit rate fits comfortably within planned link capacity. | Camera count, codec, resolution, retention design and uplink overhead. |
| Legacy airMAX M expansion | The existing network uses compatible M-series equipment and replacement consistency matters. | Firmware, channel plan, radio mode and long-term lifecycle expectations. |
| High-capacity new deployment | Only after confirming that Fast Ethernet and M-series capability meet the requirement. | Whether Loco5AC, NanoBeam, LiteBeam or another current platform is more suitable. |
| General office Wi-Fi | Usually not the primary use; this is a directional outdoor CPE. | Consider a dedicated indoor or outdoor Wi-Fi access point for client access. |
Verified technical information
| Brand | Ubiquiti |
|---|---|
| Product name | airMAX NanoStation M5 loco |
| Model | LocoM5 |
| Product type | Outdoor 5 GHz customer-premises radio |
| Dimensions | 161 × 31 × 80 mm |
| Weight | 180 g |
| Enclosure | Outdoor UV-stabilised polycarbonate |
| Mounting | Pole mount included |
| Network interface | One 10/100 MbE RJ45 port |
| Power method | Passive PoE, two-pair |
| Power supply | 24 V, 0.5 A PoE adapter included |
| Supported voltage | 22–27 V DC |
| Maximum power consumption | 5.5 W |
| Antenna gain | 13 dBi |
| Polarisation | Dual-linear |
| Antenna beamwidth | 45° horizontal, 45° vertical, 45° elevation |
| Operating temperature | -30 to 75 °C |
| Operating humidity | 5 to 95% non-condensing |
| Certifications listed by manufacturer | FCC, IC, CE and RoHS; regional acceptance should be confirmed for the destination. |
| Availability | Contact FourTeck for current UAE model, quantity and lead-time options. |
Compatibility and dependency notice
The LocoM5 belongs to the airMAX M generation. Buyers should not assume that every 5 GHz Ubiquiti radio will interoperate in every proprietary airMAX mode. A newer AC model, a UniFi access point and an M-series radio may use the same broad frequency band while still serving different platforms and deployment purposes. Confirm the intended wireless mode at both ends, firmware compatibility, channel width, regulatory domain and encryption settings before purchase.
Passive PoE is another important dependency. The unit uses 24 V passive PoE rather than standard IEEE 802.3af/at negotiation. Do not connect it to an unknown power source merely because the connector is RJ45. Use the included adapter or a confirmed compatible power arrangement, and plan outdoor-rated cabling, drip loops, grounding and surge protection where appropriate.
A practical purchase and deployment journey
Define the traffic
List the devices and applications that will use the link. Include camera bit rates, user traffic and future additions rather than selecting only by distance.
Survey the path
Check line of sight, mounting height, obstructions, Fresnel-zone clearance, cable access and safe maintenance access at both endpoints.
Confirm radio pairing
Identify the radio at each end and confirm that the intended operating mode, firmware and frequency plan are compatible.
Build the quotation
Include radio quantities, mounting hardware, outdoor cable, protection, switches, configuration and installation scope as required.
Install and align
Mount securely, align accurately, configure appropriate channel settings and verify link quality under realistic traffic.
Directional connectivity and link discipline
A directional radio differs from an ordinary access point. It is designed to concentrate the wireless signal toward a defined area rather than provide broad client coverage in every direction. This can improve link focus, but it also makes alignment and path planning essential.
The listed 45-degree beamwidth gives installers some practical aiming tolerance, yet mounting should remain stable. A pole that moves in wind, a bracket attached to a flexible surface or a path that becomes blocked by new structures can reduce performance. Outdoor wireless design should account for more than whether one device can be visually seen from the other.
For business use, the link should be monitored after installation. Signal level, noise, retransmissions and real throughput provide better operational evidence than a one-time connectivity test.
Capacity planning around Fast Ethernet
The LocoM5 has one 10/100 MbE Ethernet interface. This is an important selection limit because the wired port itself cannot provide Gigabit connectivity. A radio may show a higher theoretical wireless rate while useful application throughput remains lower due to protocol overhead, environmental conditions and the Fast Ethernet interface.
For a few cameras or a modest office extension, the available capacity may be acceptable after calculation. For large camera deployments, high-volume file transfer, server replication, public Wi-Fi backhaul or multiple departments, a newer platform with Gigabit Ethernet may be the more suitable procurement choice.
FourTeck can help turn the application list into a practical capacity estimate before the equipment is ordered.
Outdoor power, cabling and protection
The included 24 V passive PoE adapter allows the radio to be powered through its Ethernet cable. This keeps mains power indoors while the radio is mounted outdoors. The cable run still requires careful planning: use suitable cable, avoid tight bends, seal entries, create a drip loop and keep the power injector in an appropriate protected location.
Outdoor radios and long copper runs can be exposed to electrical events. Grounding, shielded cable and surge protection should be evaluated according to the site design and local installation practice. These items are not simply accessories; they influence maintainability and equipment risk.
The exact installation scope should be stated in the quotation so that device supply is not confused with a complete installed link.
Ideal environments and common use cases
Warehouses and yards
Connect a remote guard room, dispatch point or storage building where a clear path exists to the main network location.
Retail and hospitality annexes
Extend connectivity to a separate kiosk, service building or staff area without treating the link as the final indoor Wi-Fi system.
Schools and campuses
Bridge smaller buildings or outdoor facilities when capacity demands and lifecycle requirements fit the M-series platform.
CCTV and access control
Backhaul traffic from a gate, perimeter point or remote security station after calculating total bandwidth and power needs.
Construction and temporary sites
Create a relocatable link between temporary offices, provided mounting, spectrum and environmental conditions are controlled.
Existing airMAX M networks
Maintain or extend a compatible legacy installation where continuity with the existing radio platform is a deliberate requirement.
Integration and operational considerations
A wireless bridge becomes part of the broader network, so addressing, VLAN design, switch configuration, DHCP behaviour, camera routing and management access should be planned alongside the radio settings. Decide whether the link will operate transparently as a bridge or whether routing will occur elsewhere in the topology. Document management IP addresses and credentials so future support does not begin with device discovery.
Channel selection should be based on the local radio environment. A channel that works during commissioning may become congested as surrounding networks change. Wider channel widths can increase potential throughput but use more spectrum and may be more vulnerable to interference. Conservative settings can sometimes provide a more stable business link than chasing the highest displayed data rate.
The operating environment also deserves attention. The manufacturer lists an operating temperature range of -30 to 75 °C and non-condensing humidity from 5 to 95 percent. These ratings do not remove the need for correct mounting, weatherproof cable entry and safe placement away from avoidable heat sources. UAE rooftop and outdoor installations can experience high ambient and surface temperatures, so airflow, sun exposure and service access should be considered during the site survey.
Buyer questions to resolve before ordering
Provide a measured or mapped distance rather than an estimate based only on the visible site.
Check buildings, trees, cranes, vehicles, signs and planned construction that may obstruct the link.
List applications, cameras, users and expected peak usage, including future growth.
Confirm the exact model and intended operating mode rather than assuming all 5 GHz devices are compatible.
Compare the port limit with current and projected application throughput.
Clarify whether the quotation covers hardware only or includes survey, mounting, alignment, testing and documentation.
Procurement checklist
☐ Confirm exact model: LocoM5
☐ Record required quantity and spare strategy
☐ State source and destination locations
☐ Measure link distance and mounting height
☐ Confirm clear line of sight and Fresnel clearance
☐ Calculate expected traffic and growth
☐ Verify remote-radio compatibility
☐ Confirm regional frequency requirements
☐ Include outdoor cable and connectors
☐ Review grounding and surge protection
☐ Confirm passive PoE power arrangement
☐ Define installation and configuration scope
☐ Request warranty and lead-time confirmation
☐ Document testing and handover expectations
How FourTeck can assist
FourTeck can review the intended use, help identify whether the LocoM5 is suitable, and prepare a quotation around the complete requirement rather than the radio alone. The review may include link purpose, expected traffic, model pairing, passive PoE, mounting, cabling, surge protection and installation scope.
For new designs, the team can also discuss whether an airMAX AC or another current wireless bridge option offers a better capacity and lifecycle fit. This comparison is particularly useful when the requested model name comes from an older bill of materials or an existing site standard.
Information needed for an accurate quote
Share the exact model, quantity, destination, preferred timeline, whether both link endpoints are required, and whether installation is included. Add a simple site sketch or map, approximate mounting heights, available power, cable distances and the equipment that will connect at each end.
When the project involves surveillance, provide the camera count and estimated bit rate. For office connectivity, state the number of users and key applications. Better requirement data helps avoid under-sizing, unnecessary accessories and incompatible radio combinations.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the Ubiquiti LocoM5. Availability may depend on quantity, sourcing channel, hardware revision and vendor lead time. Because this is an M-generation product, buyers should also confirm whether the objective is to maintain an existing deployment or create a new link. A newer alternative may be recommended where capacity, lifecycle or interoperability requirements justify it.
Delivery and project coordination can be discussed after the exact requirement is confirmed. Installation, alignment, configuration and testing should be included explicitly in the quotation when required. Warranty terms should be confirmed against the supplied unit and source rather than assumed from generic online listings.
Dubai, Abu Dhabi, Sharjah and Ajman coverage
FourTeck can coordinate requirement review and quotation support for projects in Dubai, Abu Dhabi, Sharjah and Ajman. The scope may range from product supply to installation planning, configuration assistance and wider network integration. Site access, working-height requirements, outdoor mounting conditions, cabling routes and travel arrangements can affect the final service scope. Buyers should provide the project location and desired outcome early so the quotation separates hardware, accessories, labour and optional support clearly.
GCC availability
FourTeck can assist organisations planning Ubiquiti outdoor wireless links across GCC markets, including the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman. Assistance may include requirement review, confirmation of the correct model generation, comparison with current alternatives, quotation coordination, passive PoE planning, accessory selection and installation-scope discussion. Product availability, regional frequency settings, delivery schedules, service visits and vendor lead times can vary by country, quantity and project condition. Before requesting a regional quotation, share the destination country, exact radio model, number of endpoints, expected traffic, deployment location and preferred timeline. Where an existing airMAX M network is being expanded, include the models and firmware currently in use. FourTeck can then help determine whether LocoM5 continuity or a planned upgrade path is the more appropriate procurement decision. Visit FourTeck Kuwait for relevant regional coordination.
Africa availability
For projects in Africa, FourTeck can help buyers evaluate the LocoM5 against the intended link distance, traffic demand, power arrangement, radio compatibility and local operating conditions. Support may include product comparison, accessory planning, quotation coordination, configuration-scope review and guidance for existing airMAX M installations. Availability and fulfilment can depend on destination, quantity, license or regulatory region, shipping arrangements, vendor lead time, installation scope and local project access. Buyers in East Africa and other regions should provide the destination country, exact model requirement, number of radios, preferred deployment schedule and any expectation for remote or on-site support. Where appropriate, FourTeck can also discuss newer outdoor wireless platforms if the project needs Gigabit Ethernet or greater capacity. Regional information is available through FourTeck Africa, FourTeck Kenya and FourTeck Uganda.
Related products, services and suitable alternatives
Ubiquiti Loco5AC
A newer AC-generation compact radio with Gigabit Ethernet. Compatibility with an M-series network should be assessed rather than assumed.
Ubiquiti NanoStation M5
A related M-series model with different hardware characteristics. Compare exact interfaces, antenna requirements and application fit.
LiteBeam and NanoBeam options
Directional airMAX alternatives may be more suitable for specific distance, gain and capacity requirements. Model selection should follow a link review.
Outdoor wireless survey
A site and path assessment can identify obstruction, mounting and interference risks before equipment is purchased.
Installation and alignment
Professional mounting, weatherproof cabling, alignment and link testing can be included as a defined project scope.
Network integration support
Switching, VLAN, CCTV and routing considerations can be reviewed as part of the wider deployment.
Browse FourTeck technology products or learn more about FourTeck.
Why businesses contact FourTeck
Outdoor wireless purchases often fail when the discussion starts and ends with a model number. Businesses contact FourTeck for practical help defining the full requirement: whether the radio is suitable, which device is needed at each end, what accessories belong in the bill of materials, and what installation work should be priced separately.
FourTeck can also help compare legacy continuity against platform modernisation. A buyer replacing one failed LocoM5 in an established network has a different decision from a business designing a new multi-building link. Treating those cases differently improves procurement clarity and reduces the risk of mixing incompatible or under-sized equipment.
Frequently asked questions
What is the Ubiquiti LocoM5 used for?
It is mainly used as an outdoor 5 GHz directional radio for carrying Ethernet traffic between compatible network locations. Common applications include building links, remote camera backhaul and connectivity to an outbuilding.
Is LocoM5 the same as Loco5AC?
No. LocoM5 is an airMAX M-generation model, while Loco5AC uses the newer airMAX AC platform and has different hardware, including Gigabit Ethernet. Confirm the exact model before ordering.
Can one LocoM5 create a complete bridge?
A bridge normally requires compatible radios at both ends unless the LocoM5 is connecting to an existing compatible airMAX M access point. The complete topology should be confirmed before purchase.
Does the LocoM5 support Gigabit Ethernet?
No. The manufacturer lists one 10/100 MbE RJ45 port. Buyers with higher throughput needs should compare newer models with Gigabit Ethernet.
What power supply does it use?
The unit uses 24 V passive PoE, and a 24 V, 0.5 A PoE adapter is listed as included. It should not be connected to an unverified PoE source.
Can it be used for normal indoor Wi-Fi?
It is primarily a directional outdoor CPE, not a general indoor access point. A dedicated Wi-Fi access point is usually more suitable for phones, laptops and broad indoor coverage.
How far can a LocoM5 link reach?
Useful distance depends on line of sight, mounting height, interference, channel settings, local power limits and the radio at the other end. A specific range should not be promised without a link review.
Is installation included in the product price?
Not automatically. Hardware supply, mounting, cabling, surge protection, configuration, alignment and testing should be listed clearly in the quotation.
What details are needed for a FourTeck quotation?
Provide quantity, destination, link distance, expected traffic, mounting locations, remote-radio model, installation requirement and preferred timeline.
How can I confirm UAE availability and warranty?
Request a current FourTeck quotation. Availability, lead time and warranty terms should be confirmed for the exact supplied units and quantity.
Confirm whether LocoM5 is right for your link
Send FourTeck the distance, location, quantity, traffic requirement and existing radio details. The team can help review compatibility, quotation scope and suitable alternatives for a Dubai or UAE deployment.
Reviews
There are no reviews yet.