Directional 5 GHz outdoor wireless CPE
Ubiquiti LiteBeam 5AC 23 LBE-5AC-23 in Dubai, UAE
The LBE-5AC-23 is an original-generation airMAX AC device built for directional outdoor wireless links. It combines a 23 dBi integrated antenna, a Gigabit Ethernet port and passive PoE power in a lightweight pole-mounted design. For buyers, the important decision is not simply whether the radio can reach a remote site, but whether the exact model, regulatory domain, link path, matching endpoint and capacity target are suitable for the intended network.
Plan before ordering
Share the link distance, site coordinates, line-of-sight conditions, required quantity and existing Ubiquiti platform. FourTeck can help define the correct bill of materials.
LBE-5AC-23
5 GHz airMAX AC
23 dBi integrated
Do not confuse with Gen2
Direct answer for buyers
The Ubiquiti LiteBeam 5AC 23 LBE-5AC-23 is a directional outdoor wireless CPE intended mainly for long-range 5 GHz point-to-point links and selected airMAX point-to-multipoint station deployments. It is worth considering when two locations have a suitable line of sight and a cable run is impractical or uneconomical. Before proceeding, confirm the exact model at both ends, legal frequency settings, required throughput, link distance, mounting height, wind exposure, PoE arrangement and whether the original LBE-5AC-23 remains the right lifecycle choice. Buyers should also verify whether a newer LiteBeam model is preferred for management, replacement planning or compatibility.
What the LBE-5AC-23 does
The device concentrates wireless energy in a directional pattern rather than distributing coverage around a room like a conventional indoor access point. That design helps it create a focused outdoor link between separated locations, provided the path is planned correctly.
Typical roles include connecting an office to a warehouse, extending connectivity to a gatehouse, linking two buildings within a compound, serving as a subscriber station in an airMAX network, or carrying network traffic to a remote camera, farm facility or temporary operating site.
Who should consider it
It may fit organisations with a clear outdoor path, moderate capacity expectations and staff or contractors who understand RF alignment, grounding, Ethernet protection and airMAX configuration. System integrators and network teams can use it where a compact directional unit is preferred.
It is less suitable where trees, buildings or terrain block the Fresnel zone; where guaranteed fibre-like performance is required; where heavy interference is expected; or where the buyer needs a current-generation platform with different management or support characteristics.
Business challenges and practical responses
Cable routes are difficult
A directional bridge may connect locations across roads, yards or leased spaces where trenching, duct access or fibre work is difficult. The wireless path still requires surveying and suitable mounting.
Remote operations need network access
A planned link can carry business applications, monitoring traffic, voice or internet access to an outlying facility. Actual performance depends on signal quality, channel width, interference and network design.
A compact outdoor endpoint is preferred
The integrated antenna and radio reduce the number of separate outdoor components. Correct pole strength, cable protection, weather sealing and earthing remain part of a professional installation.
Budget must remain controlled
LiteBeam products are often evaluated for cost-conscious wireless links. Buyers should compare total project cost, including two endpoints, mounts, surge protection, cable, labour, alignment and support.
Product-fit matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Building-to-building link | Both sites have clear line of sight and practical mounting positions. | Distance, Fresnel clearance, endpoint model, capacity target and interference. |
| airMAX subscriber station | The access point platform and configuration are compatible. | airMAX AC mode, firmware, channel plan and network policy. |
| Outdoor camera backhaul | Traffic requirements are understood and stable power is available. | Bitrate, latency tolerance, redundancy, security and weather protection. |
| Temporary or project site | Mounting and alignment can be maintained for the project duration. | Power, mast stability, relocation plan, permissions and support scope. |
Verified product information
The following model-specific facts are based on Ubiquiti documentation for the LBE-5AC-23. Regulatory settings, usable channels and maximum transmit power may differ by country. Product lifecycle and current supply status should be confirmed before a quotation is finalised.
| Brand | Ubiquiti |
|---|---|
| Product name | LiteBeam 5AC 23 |
| Model | LBE-5AC-23 |
| Product type | Outdoor 5 GHz airMAX AC CPE / directional bridge radio |
| Antenna | Integrated directional antenna, 23 dBi gain |
| Networking interface | One 10/100/1000 Ethernet port |
| Power method | Passive PoE, pairs 4/5 positive and 7/8 return |
| Power supply | 24V, 0.3A Gigabit PoE adapter listed as included in the model guide; confirm package contents for current supply |
| Maximum power consumption | 7W |
| Dimensions | 358 × 272 × 222 mm |
| Weight | 0.75 kg |
| Operating temperature | -40 to 70°C |
| Operating humidity | 5 to 95% non-condensing |
| ESD/EMP protection | ±24 kV contact / air as specified by Ubiquiti |
| Availability | Contact FourTeck for current UAE options, model status and alternatives |
Directional gain and link planning
A 23 dBi directional antenna helps focus the radio signal toward the opposite endpoint. This can improve link budget and reduce exposure to some off-axis interference compared with an omnidirectional antenna. It does not remove the need for a clean path. Trees, walls, metal structures, cranes, seasonal foliage and terrain can obstruct the direct path or the wider Fresnel zone around it.
A professional plan considers coordinates, elevation, mounting height, expected rain conditions, channel availability, local interference and the receive sensitivity of both endpoints. A link that appears visually clear from ground level may still perform poorly if the radio path passes close to a roof edge or dense vegetation.
airMAX AC operation
The LBE-5AC-23 belongs to Ubiquiti’s airMAX AC platform and uses airOS 8 features associated with AC products. Buyers integrating it into an existing wireless network should confirm access-point mode, station mode, channel width, firmware level and protocol compatibility.
It should not be treated as a general indoor Wi-Fi access point for phones and laptops. Its primary role is managed outdoor wireless infrastructure. Network security, VLAN design, IP addressing, monitoring and remote administration should be planned as part of the complete deployment rather than left to default settings.
Low-power outdoor deployment
The documented maximum power consumption is 7W, and power is delivered through passive PoE. This allows the Ethernet cable to carry both data and power from the indoor adapter to the outdoor unit, simplifying the mast installation.
Passive PoE is not interchangeable with every standards-based PoE system. The voltage, polarity and injector arrangement must be checked before connection. Buyers should also include outdoor-rated cable, drip loops, surge protection, grounding and a protected indoor power source. Incorrect PoE equipment can damage a radio or prevent it from starting reliably.
Important compatibility and lifecycle notice
The product requested here is the original LBE-5AC-23. It is not the LBE-5AC-Gen2 and not the LBE-M5-23. These products may look similar in listings, but they differ in radio platform, Ethernet capability, management features, mechanical details or generation. A quotation should therefore use the exact model code rather than a shortened description such as “LiteBeam 23.”
Because the original model is older, buyers should confirm current vendor lifecycle, firmware availability, replacement strategy, regional variant and compatibility with the intended access point. Where a new project is being designed, FourTeck can also discuss current LiteBeam, NanoBeam, PowerBeam or other Ubiquiti options without presenting them as automatic one-for-one replacements.
Deployment and purchase journey
Define the traffic need
List the applications, users, cameras, voice channels and peak throughput expected across the link.
Survey the path
Confirm coordinates, distance, line of sight, Fresnel clearance, mounting height and interference conditions.
Select both endpoints
Verify the radio models, regulatory region, PoE equipment, mounts, cable and surge-protection components.
Install and align
Use stable mounting, weather-safe cabling, grounding and measured alignment rather than visual estimation alone.
Test and document
Record signal, noise floor, modulation, throughput, latency, firmware, IP settings and support contacts.
Suitable business environments
Warehouses and logistics yards
A link may extend ERP terminals, barcode systems, voice or surveillance connectivity to a separate building. Vehicle movement and tall storage structures should be considered during path planning.
Construction and temporary sites
Directional wireless can provide a movable network path where fixed cabling is not yet available. Mast relocation, changing cranes and temporary power make periodic reassessment important.
Farms and remote facilities
The device can be evaluated for connecting offices, pumps, monitoring equipment or accommodation areas. Long paths must account for terrain, vegetation growth and reliable power.
Hospitality and managed properties
Separate buildings, service areas and gatehouses may require a backbone link. Capacity should be calculated from actual guest, staff and operational applications rather than distance alone.
Operational and integration considerations
A wireless bridge becomes part of the wider business network, so its role should be defined in the same way as a switch uplink or fibre connection. Decide whether the radios will operate as a transparent bridge, whether management traffic needs a dedicated VLAN, how administrators will reach the devices, and how configuration backups will be stored. Strong administrative credentials, controlled management access and accurate time settings should be included in the deployment standard.
Throughput figures advertised for a radio platform do not represent a guaranteed application rate. Real capacity is affected by channel width, modulation, signal-to-noise ratio, protocol overhead, interference, distance, Ethernet conditions and traffic direction. The link should be tested with representative traffic and monitored after installation. A business-critical path may also require a secondary connection, spare hardware or a documented replacement procedure.
Outdoor reliability depends heavily on installation quality. Use suitable UV-resistant Ethernet cable, weatherproof entry methods and correctly rated surge protection. Mounting hardware should be tightened and inspected without damaging the antenna assembly. Pole movement can change alignment even when the radio itself remains functional. In coastal, dusty or high-temperature environments, the mounting structure, connectors and cable route deserve particular attention.
Questions to resolve before requesting a quotation
Provide a photograph of the label, regional suffix and current firmware where the unit must match an installed device.
Share both site coordinates, distance, elevation and photographs from the intended mounting points.
State the expected normal and peak traffic, not only the internet service speed at the main location.
Compatibility and performance depend on the access point or peer radio, its mode and its configuration.
Clarify whether the request includes survey, mounting, cabling, alignment, configuration, testing or documentation.
Identify redundancy, spare-unit, monitoring and support expectations for links that affect core operations.
Procurement checklist
✓ Exact LBE-5AC-23 model and regional suffix
✓ Required quantity and whether units are needed for both ends
✓ Existing access point or peer-radio details
✓ Link distance, site coordinates and mounting height
✓ Required throughput and application mix
✓ Permitted 5 GHz frequency and channel plan
✓ Passive PoE adapter and power-source requirements
✓ Outdoor Ethernet cable length and grade
✓ Surge protection and grounding requirements
✓ Pole, bracket and structural mounting conditions
✓ Installation, alignment and configuration scope
✓ Firmware, monitoring and documentation expectations
✓ Warranty guidance and replacement planning
✓ Delivery destination and requested project schedule
FourTeck planning assistance
FourTeck can review the exact requirement before a product quotation is prepared. Useful inputs include the current network diagram, endpoint models, mounting photographs, site coordinates, bandwidth objectives, required quantity and desired installation scope. This review can help identify whether the original LBE-5AC-23 is required as a replacement or whether a newer Ubiquiti option should be assessed for a new deployment.
Support may include model clarification, bill-of-material guidance, accessory planning, configuration scope, installation coordination and handover requirements. These activities should be listed in the quotation because hardware supply does not automatically include survey, mounting, cabling, configuration or ongoing support. Visit the FourTeck technology services page for related planning and implementation assistance.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability of the LBE-5AC-23. Supply may depend on the exact regional model, quantity, vendor lead time and whether the product remains available through the relevant channel. Because it is an older model, substitution should never be assumed without checking the network requirement.
For projects in Dubai, Abu Dhabi, Sharjah and Ajman, FourTeck can discuss delivery coordination, installation planning and configuration scope after the site and product requirement are defined. Buyers can review other business technology products or send the requirement through the FourTeck contact page.
GCC availability
FourTeck can assist organisations evaluating the Ubiquiti LBE-5AC-23 or a suitable current alternative for projects across the GCC. Requirement review can cover the destination, number of links, endpoint compatibility, regional radio settings, mounting conditions, power accessories, configuration scope and installation expectations. Coordination may be relevant for projects in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman, but availability and permissible wireless settings can differ by country. Product supply, service visits, delivery schedules and vendor lead times are not fixed until the exact model, quantity and destination are confirmed. Buyers should share the country, site locations, required quantity, preferred deployment schedule and whether survey, alignment, configuration or support is required. For Kuwait-related coordination, the FourTeck Kuwait resource may also be useful.
Africa availability
Organisations planning outdoor wireless links in Africa can contact FourTeck for product and project guidance based on the exact destination and application. The review may include radio selection, regional frequency requirements, power and plug considerations, mounting materials, outdoor cabling, surge protection, configuration, spares and support expectations. Fulfilment can vary according to country, model lifecycle, quantity, shipping arrangements, vendor lead time and local project conditions. Buyers in East Africa and other regions should provide site coordinates, expected link distance, required bandwidth, installation environment and deployment schedule so that an appropriate option can be considered. FourTeck does not assume local inventory or guaranteed delivery for this model. Regional information is available through FourTeck Africa, FourTeck Kenya and FourTeck Uganda.
Related options and services
LiteBeam 5AC Gen2
A later LiteBeam generation that may be considered for new deployments. Do not treat it as an automatic replacement without reviewing management and compatibility requirements.
NanoBeam 5AC
A compact directional airMAX AC option for projects where form factor, mounting and link design point to a different antenna arrangement.
PowerBeam 5AC
A product family often evaluated for more focused long-distance links. Model selection should follow a link budget and interference review.
Wireless site survey
Path verification, interference review, mounting assessment and capacity planning can reduce avoidable procurement and installation problems.
Installation and alignment
Professional mounting, cable routing, grounding, radio alignment and performance testing can be included as a defined project scope.
Why businesses contact FourTeck
Outdoor wireless purchasing involves more than selecting an antenna gain figure. Buyers contact FourTeck to clarify exact model codes, compare lifecycle options, check compatibility with installed Ubiquiti equipment, prepare a practical bill of materials and define which installation or configuration work belongs in the quotation. This is particularly important for the LBE-5AC-23 because similar-looking LiteBeam models can be incorrectly substituted in online listings.
FourTeck can also help structure the information needed for an accurate proposal: endpoint locations, distance, line-of-sight evidence, traffic requirements, quantity, preferred timeline and support expectations. Where the link supports a critical operation, the discussion can include monitoring, spare hardware, redundancy and a documented restoration plan. Learn more about FourTeck or submit the project details for review.
Frequently asked questions
Is the LBE-5AC-23 the same as the LBE-5AC-Gen2?
No. They are different generations. The Gen2 model includes later management and hardware characteristics. Always quote and verify the full model code.
Can one unit create a complete point-to-point link?
A point-to-point link normally requires a compatible radio at each end. The opposite endpoint may be the same model or another compatible airMAX AC device, depending on the design.
Does it provide regular Wi-Fi coverage for phones?
Its main purpose is directional outdoor airMAX connectivity, not general indoor client Wi-Fi. It should be deployed as part of a planned wireless infrastructure link.
What link distance will it support?
Distance cannot be confirmed from the model alone. Antenna height, clear line of sight, Fresnel clearance, interference, channel settings, local regulations and the opposite radio determine practical performance.
Is a PoE adapter included?
Ubiquiti’s model guide lists a 24V, 0.3A Gigabit PoE adapter as included. Current package contents and regional plug type should be confirmed with the quotation.
Can it connect to an older airMAX M device?
Compatibility depends on access-point mode, firmware and network design. Do not assume that AC and M-series products will operate together in every configuration; the installed platform should be reviewed.
Does FourTeck provide installation and configuration?
Installation, cabling, alignment, configuration, testing and documentation can be discussed as a defined scope. They are not automatically included with hardware supply.
Is the LBE-5AC-23 currently available in Dubai?
Availability must be confirmed for the exact quantity and regional model. As an older product, it may have limited supply or may require evaluation of a newer alternative.
What information is needed for a quote?
Provide the exact model, quantity, destination, link distance, endpoint details, required capacity, mounting conditions, installation scope and preferred schedule.
Discuss the LBE-5AC-23 requirement
Confirm whether you need an exact replacement, a complete wireless bridge, a current-generation alternative or installation assistance. Share the site and network details so the quotation can reflect the real project scope.
Reviews
There are no reviews yet.