Fortinet FortiSwitch FS-124E-FPOE Network Switch in Dubai, UAE
The FS-124E-FPOE combines 24 Gigabit Ethernet access ports, PoE+ power delivery and four SFP uplinks in a rack-ready FortiSwitch platform. It is designed for organisations that need to connect and power devices at the access layer while retaining the option of FortiGate-integrated management through FortiLink or suitable standalone administration. Buyers should confirm PoE demand, uplink design, support eligibility, firmware path and whether this exact E-series model remains the right procurement choice compared with newer 124-series alternatives.
Share quantity, powered-device count, expected PoE load, uplink type and management preference so the proposed bill of materials can be checked.
Direct answer for buyers considering the FS-124E-FPOE
The Fortinet FortiSwitch FS-124E-FPOE is a 24-port Gigabit Ethernet managed switch intended for access-layer deployments that also need Power over Ethernet. All 24 copper access ports can be used for compatible PoE-powered endpoints, subject to the total 370W power budget, while four SFP slots provide Gigabit fiber or copper-transceiver uplink options depending on the approved module. It may suit branch, office, hospitality, education and retail networks where access points, phones or cameras need both data and power. Before proceeding, confirm the total PoE calculation, uplink optics, desired management mode, FortiGate compatibility, required support coverage and current product lifecycle.
What the switch does
At the physical access layer, the FS-124E-FPOE connects wired endpoints over Gigabit Ethernet and can provide electrical power to compatible devices through Ethernet cabling. Wireless access points, IP telephones, badge readers and compatible surveillance devices can share one structured-cabling run for data and power, provided their individual and combined power requirements fit the switch budget.
The four SFP uplinks are useful when the switch sits in a wiring closet and needs fiber connectivity back to an aggregation point or firewall environment. The exact transceiver must be confirmed because supported module types vary by platform and firmware. When used with a compatible FortiGate and FortiLink design, the switch can become part of a centrally administered secure access architecture.
Who should consider it
The model is most relevant to organisations that already operate Fortinet infrastructure, need a 24-port PoE access switch, and have a clear reason to source this exact E-series unit. It can also be considered for like-for-like replacements, expansion of an installed estate, laboratory consistency or projects where a known configuration has been standardised around this hardware generation.
A buyer starting a completely new network should compare the FS-124E-FPOE against newer 124-series options before committing. The right choice depends on budget, existing standardisation, support requirements, PoE load, expected network lifespan and whether the deployment needs only Gigabit access or should accommodate higher-speed wireless and uplink demands later.
Business problems it helps address
Centralised power for edge devices
PoE can reduce the number of local power adapters and outlets required for compatible endpoints. Rack power, UPS capacity and endpoint wattage must still be calculated as part of the design.
Fortinet-managed branch access
FortiLink can reduce separation between firewall and access-switch administration in compatible deployments, helping teams coordinate VLAN and access policies through a broader Fortinet architecture.
Fiber uplinks from wiring closets
The four SFP interfaces allow suitable 1Gb transceivers to be selected for closet-to-core or closet-to-closet links. Optic type, fiber mode, distance and compatibility must be verified before ordering.
Consistency in an existing estate
Organisations already standardised on FS-124E-FPOE may value like-for-like replacement for sparing and configuration familiarity, though lifecycle and support implications should be checked.
Product-fit decision matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| 24 powered access ports | The endpoint count fits within 24 copper ports and total demand remains within 370W. | Per-device wattage, startup peaks and future additions. |
| Gigabit fiber uplinks | 1Gb SFP uplinks are adequate for the topology. | Optic model, fiber type, reach and whether faster uplinks are preferable. |
| FortiGate integrated access | A compatible FortiGate and FortiLink design will be used. | FortiOS, FortiSwitchOS and topology compatibility. |
| Like-for-like replacement | Operational consistency with an installed FS-124E-FPOE estate matters. | Lifecycle, support eligibility and migration requirements. |
Technical information
| Brand | Fortinet |
|---|---|
| Model | FS-124E-FPOE |
| Product type | Managed Ethernet access switch with PoE+ |
| Copper interfaces | 24 × Gigabit Ethernet RJ45 |
| SFP interfaces | 4 × 1 Gigabit SFP |
| PoE budget | Up to 370W total |
| PoE guidance | IEEE 802.3af/802.3at use; confirm endpoint power class and total demand |
| FortiLink | Supported for compatible FortiGate-managed deployments |
| SFP modules | Optional; verify compatibility for the chosen link and software release |
| Support and warranty | Contract, condition, registration and lifecycle dependent |
| UAE availability | Contact FourTeck to confirm current source, condition, quantity and lead time |
Lifecycle and sourcing need careful verification
The FS-124E-FPOE remains referenced in FortiSwitchOS supported-model documentation, but current Fortinet ordering material focuses on newer 124-series platforms. That does not by itself prove that new units or every support option are available in every region. Exact lifecycle, serial-number eligibility and contract availability should be confirmed before purchase.
If the switch is being sourced as a replacement, ask whether the proposed unit is factory-new, unused old stock, refurbished or pre-owned. If it is for a new long-life deployment, compare a newer 124-series model as part of the decision rather than assuming the E-series remains the best option.
PoE planning
The FPOE version is attractive when a large proportion of access ports must supply power, but the 370W aggregate budget still requires an endpoint-by-endpoint calculation. Low-power phones, access-control devices and some cameras consume much less than higher-power wireless access points or surveillance devices. A project should therefore use the actual endpoint models and leave operational headroom instead of planning exactly to the maximum.
Power design also extends beyond the switch itself. Rack power, UPS capacity, circuit loading and cooling influence resilience. Centralised PoE can simplify endpoint installation, but it also means a switch or rack-power event can affect many powered devices at once. Critical environments should account for this in their redundancy plan.
FortiLink and integrated management
In compatible deployments, FortiLink allows the FS-124E-FPOE to participate in a FortiGate-managed switching architecture. This can reduce the operational separation between firewall policy and access switching. The exact FortiGate model, FortiOS version, FortiSwitchOS version and topology should be validated before deployment because feature support can change across releases.
For standalone operation, buyers should decide who owns configuration backups, firmware maintenance, monitoring and access control. FourTeck can assist with planning either approach and can define configuration or migration scope separately from hardware supply.
Uplink design
The four SFP slots can be useful for fiber uplinks between floors, wiring closets or aggregation devices. The optic, fiber type, connector, distance and remote interface must match. If the switch will aggregate heavy wireless, video or storage traffic, buyers should also determine whether 1Gb uplinks are sufficient for the expected lifespan of the deployment. A current platform with faster uplinks may be a better long-term choice where traffic growth is expected.
Suitable environments and use cases
Branch offices
A branch can combine desktop connectivity, IP telephony and wireless access through one 24-port PoE access layer when the power and uplink requirements fit.
Hospitality
Hotels and serviced properties may use PoE for access points, phones and compatible cameras across wiring closets, with VLAN and high-availability planning handled separately.
Education
Training rooms and campuses can combine ordinary Ethernet endpoints with centrally powered Wi-Fi and telephony where Gigabit uplinks meet traffic requirements.
Retail
Retail sites can connect POS infrastructure, cameras, phones, access points and back-office devices while using Fortinet standardisation across multiple locations.
Procurement checklist
FourTeck sizing, configuration and procurement assistance
FourTeck can help determine whether the FS-124E-FPOE is needed for an exact replacement, estate expansion or new deployment. That distinction affects the recommendation. A replacement may justify staying with the same hardware generation, while a greenfield project may benefit from reviewing newer 124-series options.
Requirement review can cover port count, PoE load, uplink speed, transceivers, FortiGate integration, rack location and support expectations. If configuration is needed, scope can include VLANs, FortiLink onboarding, port profiles, management settings and agreed testing. Buyers can also browse the FourTeck product range, deployment and support services and Fortinet solutions for UAE requirements.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the FS-124E-FPOE. Availability can vary according to hardware condition, quantity, source, lifecycle status and vendor lead time. Because this is an older E-series model, buyers should avoid assuming that a third-party listing represents factory-new stock with current support eligibility. Ask for condition and support status to be stated clearly in the quotation.
Delivery and project coordination can be discussed after the exact requirement is confirmed. If installation or configuration is required, include that scope so rack work, uplink setup, FortiLink integration and testing responsibilities are clear. Use the FourTeck contact page with quantity, deployment location, powered-device count and expected project date.
Dubai, Abu Dhabi, Sharjah and Ajman coverage
Businesses planning FortiSwitch deployments in Dubai, Abu Dhabi, Sharjah and Ajman can use FourTeck for requirement clarification, quotation coordination and project-scope discussion. Confirm the exact switch model, required quantity, PoE demand, optical uplinks, FortiGate integration, support expectations and physical environment. Multi-site customers should identify each destination, quantity per site and whether configurations are standardised or location-specific.
GCC Availability
FourTeck can assist organisations planning FortiSwitch requirements across GCC markets with model review, quotation coordination, power and uplink sizing, support guidance and deployment-scope discussion. For the FS-124E-FPOE, procurement should begin by confirming whether the requirement is for the exact E-series model or whether a current 124-series alternative is acceptable. Requirements can differ across the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman, especially for multi-site projects and varying lead times.
Availability, support eligibility, delivery schedules and service scope can vary by country, model, quantity and hardware condition. Buyers should share destination country, switch quantity, PoE endpoint list, transceiver needs, preferred support coverage and planned deployment date. For Kuwait projects, see FourTeck Kuwait technology coverage. Local inventory or fixed delivery dates should not be assumed until confirmed for the specific order.
Africa Availability
For organisations sourcing networking equipment for Africa, FourTeck can help review model selection, accessories, transceivers, support expectations, deployment conditions and regional procurement planning. The FS-124E-FPOE may be requested for an installed Fortinet estate, spare strategy or branch rollout, but lifecycle position and newer alternatives should be considered. Environmental conditions, power stability, rack infrastructure and fiber standards can also influence whether the same bill of materials is suitable for every site.
Availability and fulfilment may depend on destination, quantity, hardware condition, shipping arrangement, vendor lead time, support entitlement and local project requirements. Buyers should provide the destination country, exact switch quantity, endpoint types, PoE demand, uplink media and preferred deployment schedule. FourTeck can coordinate planning through its Africa technology coverage. Customs outcomes, local stock and onsite coverage are subject to project-specific confirmation.
Related options
FortiSwitch FS-124F-FPOE
A newer 24-port full-PoE FortiSwitch option with faster uplinks. It is an important comparison point for new deployments.
Newer 124G platforms
Current 124-series models should be evaluated when multigigabit access, faster uplinks or a longer procurement lifecycle are important.
FortiGate integration review
Share the FortiGate model and software version before selecting a FortiLink-managed switch.
Installation and configuration
Rack installation, FortiLink onboarding, VLAN setup, port profiles and migration testing can be scoped separately.
What buyers commonly need to know before shortlisting this switch
The most useful way to assess the FS-124E-FPOE is to separate hardware fit, power fit and procurement fit. The switch has the expected 24 Gigabit PoE access ports and four SFP uplinks, but a technically compatible switch is not automatically the best purchase for every project. Existing estates may value exact-model consistency, while a new project may benefit from a later FortiSwitch generation.
Can it power Wi-Fi access points and IP phones?
It can power compatible IEEE PoE endpoints when their requirements fit the available budget. List the exact access point, phone or camera models and calculate their total maximum draw with suitable headroom.
What are the SFP ports used for?
They provide Gigabit uplink options with suitable transceivers. The optic must match the switch compatibility list, remote equipment, fiber type and distance.
Is it appropriate for cameras?
Possibly, but camera count, bitrate, PoE use, recording topology and uplink loading must be considered together. A PoE budget alone does not prove the video network is correctly sized.
Why compare a newer model?
Newer models may provide faster uplinks, updated hardware capabilities and a clearer current procurement path. For a new long-life network, those factors can outweigh the familiarity or lower purchase cost of an older model.
Online price comparisons can also be misleading because listings may mix new, old-stock, refurbished and pre-owned hardware. Support, warranty basis, optics, taxes and services can differ between offers. A business quotation should therefore identify the exact condition and included commercial elements instead of comparing headline prices alone.
For a useful quotation, provide quantity, destination, acceptable hardware condition, FortiGate model where applicable, powered-device list, required optics, installation scope and target date. This allows FourTeck to assess the requested FS-124E-FPOE and, if helpful, present a current alternative separately.
Buyer questions that prevent a wrong purchase
Do I need the exact E-series unit or only a 24-port FortiSwitch?
Exact-model matching may matter for replacement and standardisation. If the need is functional, current 124-series products should be compared before committing.
How much PoE headroom should I leave?
Avoid designing a critical installation exactly to the 370W ceiling. Headroom should account for endpoint variation, startup behaviour and future additions.
Can I reuse existing SFP modules?
Only after compatibility is confirmed. Physical fit is insufficient; the optic must be supported and must match the fiber and remote endpoint.
Will my current FortiGate manage it?
FortiLink support exists, but the actual FortiGate, FortiOS, FortiSwitchOS and topology combination should be checked.
What belongs in the supplier quote?
Request the exact model, quantity, condition, support basis, accessories, optics, delivery destination and configuration or installation scope.
When is a newer model more suitable?
Consider a newer platform when longer support life, faster uplinks, multigigabit access or future capacity matter more than exact hardware consistency.
Frequently asked questions
How many PoE ports does the FS-124E-FPOE provide?
It provides 24 Gigabit Ethernet RJ45 access ports with PoE capability and a maximum total PoE budget of 370W.
What uplink interfaces are available?
The model has four 1 Gigabit SFP slots. Transceivers should be selected after compatibility and fiber requirements are confirmed.
Can it be managed through FortiGate?
Yes, in compatible FortiLink deployments. Confirm the FortiGate model, FortiOS version, FortiSwitchOS version and topology.
Is the model still supported?
It remains listed in FortiSwitchOS supported-model documentation, but hardware lifecycle and support-contract eligibility must be checked separately.
Are SFP transceivers included?
Do not assume they are included. Optics should be listed separately unless the quotation explicitly states otherwise.
Should I compare a newer 124-series model?
Yes for a new deployment. The FS-124E-FPOE can still make sense for exact replacement or standardised estates, but newer models may provide a better lifecycle and uplink fit.
What information should I send FourTeck?
Send quantity, destination, acceptable hardware condition, powered-device list, FortiGate model if applicable, uplink needs, optics, services and target date.
Can FourTeck help with configuration?
Configuration, FortiLink onboarding, VLANs, port profiles, migration planning and testing can be discussed and quoted as project scope.
Confirm the right FortiSwitch before committing the project
If you need the exact FS-124E-FPOE, share quantity, hardware-condition requirement and support expectations so current sourcing can be checked. If the goal is a 24-port Fortinet full-PoE access switch, ask for a comparison with current alternatives. FourTeck can review PoE demand, uplinks, FortiGate integration, transceivers, configuration scope and destination before quotation.
Reviews
There are no reviews yet.