Fortinet FortiSwitch FS-124F-POE Network Switch in Dubai, UAE
A 24-port Gigabit managed access switch for businesses that need selective PoE+ delivery, high-speed 10 Gigabit uplinks and a Fortinet-aligned operating model without moving to full-PoE on every copper port.
Direct answer: what is the FS-124F-POE?
The Fortinet FortiSwitch FS-124F-POE is a managed Ethernet access switch in the FortiSwitch 124F family. Its main role is to connect wired business devices while supplying PoE+ power to as many as 12 designated access ports within a 185 W total budget. It also provides four 10 Gigabit SFP+ interfaces for uplinks. Organisations should consider it when they need 24 Gigabit access ports but only part of the edge requires PoE. Before proceeding, confirm the number and wattage of powered devices, uplink media and optics, FortiGate or cloud-management requirements, support coverage, rack and power conditions, and whether a full-PoE model would better fit future expansion.
What this switch does
The FS-124F-POE serves as an access-layer switching point for endpoints such as desktop systems, printers, IP phones, wireless access points and IP cameras. All 24 RJ45 interfaces provide Gigabit Ethernet data connectivity, while a subset of 12 ports can provide IEEE 802.3af/802.3at power to compatible devices. The shared PoE budget is the practical limit that determines how many powered devices can be supported at the same time.
Four SFP+ interfaces give designers room for 10 Gigabit uplinks toward an aggregation switch, server connection, or Fortinet network edge, subject to the selected transceivers and architecture. In Fortinet environments, FortiLink support can place switching operations within a coordinated security and network-management design.
Who should consider it
This model is well suited to organisations that need a 24-port access switch but do not expect every edge connection to require PoE. That can include branch offices with desk phones on only part of the floor, professional offices using a limited number of access points, small retail locations, schools, clinics, workshops and distributed business sites.
It is less suitable when the design requires PoE on most or all 24 copper ports, when multi-gigabit copper is needed for high-density modern wireless, or when the total powered-device requirement could exceed 185 W. In those cases, a different FortiSwitch model may be more appropriate. FourTeck can compare requirements before the bill of materials is finalised.
Business problems the FS-124F-POE can help address
Too many separate power adapters
PoE+ can power suitable phones, cameras and wireless devices over the same Ethernet cabling used for data, helping reduce local power-brick requirements at selected endpoints.
Access layer outgrowing 1G uplinks
Four 10GE SFP+ interfaces allow higher-speed uplink planning than a switch limited to 1 Gigabit uplinks, provided the upstream equipment and optics are selected correctly.
Fragmented branch management
FortiLink support can align switch control with a FortiGate-based network design, giving IT teams a path to coordinated configuration and policy rather than treating the LAN as a separate island.
Overbuying PoE capacity
Where only a portion of edge devices need power, the 12-port PoE design may be a better fit than choosing a full-PoE switch purely because it has the same number of data ports.
Core capabilities buyers should understand
Is the FS-124F-POE the right fit?
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| 24 wired endpoints | Most connections need 1 Gigabit copper access. | Allow spare ports for growth, printers, phones, cameras and APs. |
| PoE deployment | No more than 12 ports need PoE+ and the combined draw stays within 185 W. | Endpoint wattage, startup demand and future additions. |
| Fast uplinks | 10GE SFP+ links are useful for aggregation or upstream connectivity. | Fiber type, distance, transceiver support and upstream interface. |
| Fortinet-managed LAN | The network uses or plans to use FortiGate/FortiLink management. | FortiOS/FortiSwitchOS compatibility and controller capacity. |
| Cloud operations | A supported Fortinet cloud-management model matches the project. | Current license SKU, term, support entitlement and regional availability. |
Verified product information
The table below keeps model-specific facts separate from optional management, optics and support items. Values that depend on deployment or commercial policy should be confirmed in the final quotation and current Fortinet documentation.
| Brand | Fortinet |
|---|---|
| Product name | FortiSwitch FS-124F-POE |
| Manufacturer model / MPN | FS-124F-POE |
| Product type | Managed Ethernet access switch with PoE+ |
| Copper access ports | 24 × Gigabit Ethernet RJ45 |
| Uplink interfaces | 4 × 10 Gigabit SFP+ |
| PoE support | 12 PoE+ ports; maximum 185 W total PoE budget |
| Switching capacity | 128 Gbps |
| Packet forwarding | 190 Mpps |
| FortiLink support | Supported; controller design and software compatibility should be confirmed |
| Cloud management | Available as an add-on option in Fortinet ordering guidance; license/term dependent |
| SFP/SFP+ optics | Multiple Fortinet transceiver options are listed for the 124F platform; choose by speed, fiber type and distance |
| Support | FortiCare options are separate commercial items; confirm desired service level and term |
| UAE availability | Contact FourTeck for current options, quantity and vendor lead time |
Dependencies that matter before purchase
The model number alone does not complete the solution. PoE endpoint load, optics, switch-management architecture, software version, support entitlement and installation scope can all change the final bill of materials. The 185 W PoE figure is a shared budget, not a promise that every powered endpoint can draw its maximum class simultaneously. A design with twelve high-draw devices can therefore require a different switch even though the port count appears correct.
Cloud management is also not something to assume is automatically included with hardware. Fortinet ordering information shows cloud management as an add-on for this switch class. Confirm the current license SKU, subscription term and support pairing. For FortiGate-managed deployment, check controller capacity and supported software versions. For SFP+ uplinks, confirm transceiver type, fiber mode, link distance and upstream compatibility before ordering optics.
A practical purchase and deployment journey
Count endpoints
Separate ordinary data connections from phones, cameras, access points and other devices that need power.
Calculate PoE load
Add the expected power demand of planned devices and keep reasonable headroom within the 185 W switch budget.
Design uplinks
Decide whether each SFP+ link will use short-range fiber, long-range fiber or another supported medium and confirm upstream ports.
Choose management
Confirm FortiGate/FortiLink, approved standalone operation or supported cloud-management licensing for the intended environment.
Finalise support and services
Add required FortiCare, installation, configuration, documentation and handover scope to the quotation rather than assuming these are bundled.
PoE planning: why 12 powered ports changes the buying decision
A frequent mistake in switch selection is counting Ethernet sockets without separating data-only ports from powered ports. The FS-124F-POE has 24 Gigabit RJ45 interfaces, but only 12 of them are intended to supply PoE+. For an office with eight IP phones and four access points, that may be a logical match if the combined wattage sits comfortably inside the 185 W power budget. For a camera deployment with 16 powered endpoints, the same switch would not meet the PoE port requirement even though it has enough data ports.
Power budgeting also matters inside the twelve-port limit. Different endpoint types draw different amounts of power, and real projects often mix low-power desk phones with access points or cameras that need more. The practical design process is to list every PoE device, its expected or maximum draw, its location, and whether future expansion is planned. A margin for replacement hardware and new endpoints is usually more useful than designing exactly to the current total.
This is where the FS-124F-POE can be cost- and design-efficient: it provides PoE where needed without assuming all 24 ports must be powered. Where the edge is expected to become PoE-heavy, buyers should compare the FS-124F-FPOE or another model rather than forcing the 185 W configuration to fit. FourTeck can review an endpoint schedule and help translate it into a more accurate switch and power requirement.
10 Gigabit uplinks and the real role of the four SFP+ ports
The four 10GE SFP+ interfaces are important because an access switch rarely operates in isolation. The edge ports collect traffic from users, phones, cameras, printers and wireless access points; the uplinks must then carry that traffic toward distribution, core, servers or the security edge. A 10 Gigabit uplink can reduce the chance that a busy access layer is constrained by a single 1 Gigabit upstream connection, but link design should still reflect the actual traffic pattern and redundancy requirement.
SFP+ is a slot format rather than a complete cable choice. The required transceiver depends on link distance, fiber type, connector plan and the interface at the far end. Fortinet publishes compatible transceiver guidance for the 124F platform, and its ordering material lists several 1G and 10G optical choices. Buyers should avoid adding a generic optic simply because the speed appears correct. Confirm the supported module, the optical standard and the fiber path before the purchase order is issued.
The presence of four uplink slots also gives architects options for separate upstream paths, link aggregation or staged migration, subject to the deployed design and supported configuration. That flexibility is useful for businesses modernising a branch or office where the access switch may remain in service through several upstream changes.
FortiLink and management choices for day-to-day operations
For organisations already standardising on Fortinet, one of the strongest reasons to consider the FS-124F-POE is operational alignment. Fortinet lists FortiLink support for the 124F platform, allowing the switching layer to participate in a FortiGate-managed LAN architecture. This can simplify how administrators approach VLANs, access policy, connected-device visibility and routine changes because the switch can be considered as part of the wider Fortinet network rather than a separate management island.
That does not mean every installation should be designed identically. The correct management mode depends on the existing FortiGate, supported firmware versions, the number of switches and access points under control, WAN design, administrator responsibilities and any need for remote or cloud operations. Fortinet also shows cloud management as an add-on option in current ordering guidance, so buyers should confirm the relevant license term and support combination instead of assuming cloud control is included with the hardware.
Before deployment, define who owns switch configuration, where backups and documentation will be kept, how VLAN and port changes will be approved, and what monitoring is expected. A technically compatible switch still needs an operating model that matches the organisation. FourTeck can include configuration and handover requirements in the quotation where needed.
Business environments where this model can make sense
Professional offices
A floor with employee PCs, printers, a limited number of VoIP phones and several wireless access points can use the mix of data-only and powered ports efficiently. The key check is whether the powered endpoint count will stay within twelve and the combined draw within 185 W.
Retail and branch locations
Point-of-sale systems, back-office PCs, cameras, APs and phones often create a mixed access layer. The four 10GE SFP+ uplinks can be useful where branches connect into a higher-capacity local distribution design.
Education and training sites
Classrooms or training centres may need many wired data ports but only selected powered APs, phones or cameras. Validate any future wireless expansion because newer access-point designs can increase power and bandwidth requirements.
Clinics and service businesses
Front-desk devices, workstations, printers, voice endpoints and cameras can fit this type of access switch where medical or line-of-business device compatibility is handled at the wider network level.
Distributed Fortinet estates
Businesses operating multiple small or midsize sites may value a consistent FortiSwitch/FortiGate design. Standardisation should still consider each location’s PoE, uplink, rack and endpoint requirements rather than forcing one bill of materials everywhere.
Selective surveillance deployments
A small camera count can be powered directly from the switch if port and wattage limits are respected. Larger surveillance projects may require more PoE ports, greater budget or dedicated switching, so camera quantity and model power draw should be confirmed first.
Integration and operational considerations
Switch compatibility is broader than whether an Ethernet cable fits. Start with the upstream network. Confirm the FortiGate or aggregation switch has the interfaces, software support and capacity required for the intended topology. If FortiLink will be used, review the supported FortiOS and FortiSwitchOS pairing and consider controller sizing for the full site rather than this one device only.
Next, review cabling and optics. Copper edge cabling should match the required Gigabit performance and PoE installation practice. SFP+ links need the correct supported transceivers and fiber. In a redundant design, document which uplink connects to which upstream device and how failover is expected to work. Do not assume that adding two cables automatically creates resilience; the network configuration must support the intended topology.
Power and rack planning are equally practical. Confirm rack space, PDU outlets, cable-management clearance, grounding requirements and ventilation for the installation location. A PoE switch should also be considered within the site’s UPS strategy because losing switch power can remove both connectivity and power from connected phones, cameras or access points at the same time.
Finally, define operational ownership. Decide who can change VLANs and port settings, how configuration backups are handled, how alerts are monitored, and whether the project needs installation records or handover documentation. FourTeck’s business technology services can be discussed separately when configuration, rollout or support coordination is required.
Questions to resolve before requesting a quotation
Separate today’s PoE count from expected growth over the switch’s planned service life.
Provide endpoint models where possible so the shared 185 W budget can be checked properly.
State fiber type, distance and upstream interface so suitable SFP+ modules can be selected.
Identify FortiGate/FortiLink, cloud-management or another approved operating design and include licenses where necessary.
Include desired FortiCare term and replacement expectations rather than adding support after deployment.
Clarify VLANs, trunks, FortiLink, management, monitoring, testing and documentation scope.
Procurement checklist for the FS-124F-POE
How FourTeck can assist with sizing and quotation
FourTeck can help turn a rough requirement such as “24-port PoE switch” into a clearer bill of materials. That starts by checking endpoint count and PoE demand, then reviewing uplink design, optics, management architecture and support needs. The purpose is not simply to quote the model requested, but to identify whether the requested model actually matches the environment or whether another FortiSwitch configuration deserves comparison.
For Fortinet-based environments, the review can also include FortiGate/FortiLink considerations, software compatibility questions and cloud-management licensing where relevant. Installation and configuration can be included as a separate project scope when the customer needs rack installation, VLAN configuration, uplink setup, FortiLink onboarding, testing or handover documentation.
Browse FourTeck network and security products or use the FourTeck contact page to share the required quantity, site details, PoE device list and preferred deployment timeline.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the Fortinet FS-124F-POE. Availability can vary with quantity, vendor lead time, regional supply, requested support term and any transceivers or related components included in the same order. A product page should not be treated as confirmation of stock or delivery date.
When requesting a quotation, provide the exact model, quantity, destination, required optics, PoE endpoint summary, management preference and whether installation or configuration is needed. FourTeck can then coordinate the hardware and service requirement more accurately. For broader Fortinet project assistance, the FourTeck Fortinet UAE resource can help buyers review related firewall, switching and wireless requirements.
Dubai, Abu Dhabi, Sharjah and Ajman project coverage
For organisations with sites in Dubai, Abu Dhabi, Sharjah and Ajman, FourTeck can coordinate requirement review, quotation preparation and project planning around a consistent switch design while still allowing for differences between locations. One branch may need eight powered phones and two access points; another may need twelve cameras and no spare PoE capacity. Treating every site as identical can create avoidable hardware mismatches. Share a site-by-site endpoint count, PoE requirement, uplink plan, rack condition and preferred implementation window. Delivery, installation and configuration schedules should be confirmed only after the exact bill of materials and project scope are agreed. Multi-site requests can also include naming, VLAN, uplink and handover standards so operational teams receive a repeatable design rather than unrelated switch configurations.
GCC Availability
FourTeck can assist organisations planning FortiSwitch deployments across GCC markets with requirement review, model selection, quotation coordination, optics and license planning, configuration scope and regional project preparation. A switch specified for one site should not automatically be copied into another country without checking local project conditions and the current supply path. Availability, licensing, delivery schedules, service visits, vendor lead times and support options can vary by destination, quantity and requirement across the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman. Buyers should provide the destination country, exact FS-124F-POE quantity, required transceivers, support term, deployment location and expected schedule. For Kuwait-related technology coordination, FourTeck also maintains a Kuwait business technology resource. Customs handling, local inventory and fixed delivery dates should be confirmed through the final commercial process rather than assumed from online listings.
Africa Availability
For projects in Africa, FourTeck can help businesses evaluate the FortiSwitch model, PoE requirements, supported optics, management approach, support needs and deployment scope before procurement. Regional fulfilment may depend on destination, quantity, license or support region, power and rack conditions, shipping arrangements, vendor lead time and local project logistics. Organisations in East Africa and other African markets should share the destination country, exact switch quantity, powered endpoint list, uplink distance, preferred support term and deployment expectations. This information helps avoid quoting a switch without the transceivers, support or implementation work needed to make it operational. Buyers can review the wider FourTeck Africa technology resource for regional planning. Local stock, customs outcomes, onsite coverage and guaranteed delivery schedules are not assumed and should be confirmed for each requirement.
Related products and options to compare
FortiSwitch FS-124F
Consider the non-PoE model when all edge devices have separate power and PoE is not part of the design. It keeps the same 24-Gigabit access and 10GE uplink concept but removes the PoE requirement.
FortiSwitch FS-124F-FPOE
For designs that need PoE+ across more of the 24 access ports, compare the full-PoE 124F variant. Fortinet lists 24 PoE+ ports and a larger 370 W maximum budget for this model.
FortiSwitch FS-124G-FPOE
Where newer wireless or high-bandwidth edge devices require multi-gigabit copper, compare the 124G full-PoE platform. Its port and power characteristics differ substantially, so it should be sized as a separate architecture.
Installation and configuration services
Hardware may be only one part of the requirement. Rack installation, FortiLink onboarding, VLAN configuration, uplink setup, testing and documentation can be scoped separately where needed.
Why businesses contact FourTeck for this type of purchase
A managed PoE switch is easy to describe in one line and easy to mis-size in practice. FourTeck focuses the conversation on the parts that affect the final design: exact model, number of powered endpoints, PoE wattage, uplink media, optics, FortiGate/FortiLink design, cloud-management needs, support term, rack conditions and implementation scope. That helps procurement teams receive a bill of materials that reflects the project rather than a price for an isolated chassis.
For multi-site environments, the same review can be repeated with consistent standards for naming, VLANs, uplinks and handover. For existing Fortinet networks, compatibility questions can be identified before equipment reaches site. For new networks, switching can be considered alongside firewall and wireless requirements so the access layer is not designed in isolation.
To discuss a broader business technology project, visit FourTeck Universal Technology or contact the team with the network diagram, endpoint list and desired project outcome.
What buyers usually need to know before shortlisting this switch
People researching the FS-124F-POE commonly start with a simple question: is it a 24-port PoE switch? The precise answer is more useful. It is a 24-port Gigabit Ethernet switch, but PoE+ is available on 12 of those ports, with a maximum shared budget of 185 W. That distinction is central to sizing. A buyer who needs only eight powered phones and a few access points may find the model well aligned. A buyer planning 20 cameras should look at a full-PoE alternative even though both projects need fewer than 24 data connections.
Does 185 W mean 185 W per port?
No. It is the maximum PoE budget available across the supported powered ports. Individual endpoints consume part of that shared budget. The important buying exercise is therefore not only “how many PoE ports?” but also “how much total power will those devices need at the same time?”
Are the four SFP+ ports only for fiber?
SFP+ slots accept supported transceiver modules. In most business designs they are used for fiber uplinks, but the correct module depends on the supported Fortinet transceiver list and the physical link. Buyers should specify distance and medium rather than purchasing optics by connector shape alone.
Another common comparison is FS-124F-POE versus FS-124F-FPOE. The practical difference is power coverage. The POE model provides power on 12 ports with a 185 W maximum budget; the FPOE model extends PoE+ across all 24 access ports and Fortinet lists a 370 W maximum budget. A project should not automatically choose the higher-power version. If only a limited set of devices needs PoE, the FS-124F-POE may avoid paying for unused power capacity. If the powered endpoint count is likely to grow beyond twelve, however, selecting the FPOE version from the beginning may avoid an early switch replacement.
Buyers also ask whether a FortiGate is mandatory. FortiSwitch is strongly designed around Fortinet’s integrated networking model, and Fortinet lists FortiLink support for this platform. The correct operating mode still depends on the proposed architecture. If the site already has a FortiGate, include the firewall model and software version in the requirement so controller capacity and compatibility can be checked. If cloud operations are preferred, Fortinet’s current ordering guidance shows a cloud-management add-on for the 100-series class, so the license term should be part of the quote instead of being treated as an included hardware feature.
Price searches for the FS-124F-POE also show a wide spread across international sellers. That is normal for enterprise networking products because listings may differ by region, tax treatment, support inclusion, stock source, warranty path and commercial channel. A low online hardware price is not automatically comparable with a UAE project quotation that includes approved regional supply, support, optics, delivery coordination or installation. Procurement teams should compare like with like: exact manufacturer part number, condition, support term, included components, destination and any professional services.
Another useful search question concerns whether the 124F generation is still relevant next to newer 124G models. The answer depends on edge requirements. The FS-124F-POE provides Gigabit copper access and 10GE SFP+ uplinks. Newer multi-gigabit platforms can be more appropriate when wireless access points or edge devices need more than 1 Gigabit over copper or higher PoE classes. If the existing endpoint estate is predominantly 1 Gigabit and only selected devices require PoE+, the 124F design can still match the requirement. The key is not generation naming but the actual access speed, PoE demand and lifecycle plan for the site.
For quotation preparation, the fastest route is to send a compact technical summary rather than only the model name. Include quantity, powered endpoint count and device types, total expected PoE draw if known, SFP+ link distance, fiber type, FortiGate model, desired support term, rack location and whether configuration is required. FourTeck can use that information to confirm whether the requested model remains suitable and identify the related optics, licensing or services that need to appear on the same proposal.
Decision questions that prevent a wrong switch purchase
Will all 24 connected devices need PoE eventually?
If the likely answer is yes, the FS-124F-POE may not be the best long-term fit because its powered-port count is twelve. Estimate the endpoint mix 12 to 36 months ahead. Phone migrations, camera additions and wireless refreshes often increase PoE demand after the initial switch purchase.
How much headroom should remain in the 185 W budget?
Avoid planning exactly to the maximum. Endpoint draw can vary by model and operating state, and replacement devices may consume more power. A sensible design records the expected wattage per device and leaves room for change rather than treating 185 W as a target to reach.
Do the uplinks need to be redundant or simply faster?
Four SFP+ slots provide design choices, but topology still has to be engineered. State whether the project needs a single 10G uplink, aggregated bandwidth, diverse upstream paths or staged migration. The required optics and switch configuration depend on that answer.
Is the existing FortiGate ready to manage the switch?
FortiLink support is useful only when the controller design is appropriate. Provide the FortiGate model, current FortiOS release and the total number of switches and access points planned for the site. Compatibility and scale should be validated as one system.
Should cloud management be included from day one?
If administrators need remote cloud operations, make that a procurement requirement. Fortinet ordering guidance identifies cloud management as an add-on for this switch class, so the proposal should include the correct current license and support term rather than leaving it for later.
What information makes a UAE quote more accurate?
Quantity, destination, required support term, optics, management model, PoE device list and desired service scope are the most useful starting points. With those details, FourTeck can coordinate the product and related items without assuming stock, support or installation conditions.
Frequently asked questions
How many PoE ports does the FortiSwitch FS-124F-POE have?
It provides PoE+ on 12 ports. The switch has 24 Gigabit RJ45 access ports in total, but only half are PoE-enabled. Buyers that need power on more than 12 copper ports should compare a full-PoE model.
What is the maximum PoE budget?
Fortinet lists a maximum 185 W PoE limit for the FS-124F-POE. This is shared across the powered ports, so the connected-device power requirement should be calculated before the switch is ordered.
How many 10 Gigabit uplinks are available?
The model provides four 10GE SFP+ interfaces. The required transceivers depend on distance, fiber type and upstream compatibility, and should be added separately where needed.
Can the FS-124F-POE be managed through FortiLink?
Yes, Fortinet lists FortiLink support for the 124F platform. The FortiGate model, FortiOS version, FortiSwitchOS version and controller scale should be checked for the final design.
Is cloud management included with the hardware?
Do not assume it is included. Fortinet ordering guidance presents cloud management as an add-on for this switch class. Confirm the current license SKU, term and support pairing in the quotation.
What is the difference between FS-124F-POE and FS-124F-FPOE?
The major purchasing difference is PoE coverage. FS-124F-POE supports PoE+ on 12 ports with a 185 W maximum budget, while Fortinet lists FS-124F-FPOE with PoE+ on all 24 access ports and a 370 W maximum budget.
Does the switch include the SFP+ transceivers?
Transceivers should be treated as separate items unless the exact supplier quotation explicitly includes them. Specify link distance and fiber type so supported optics can be selected correctly.
Can FourTeck provide installation and configuration?
Installation, FortiLink onboarding, VLAN configuration, uplink setup, testing and documentation can be discussed as a separate project scope. The exact deliverables should be included in the quotation when required.
How do I confirm current UAE availability?
Send FourTeck the exact FS-124F-POE model, quantity, destination, support term and any optics or service requirements. Availability and lead time can then be confirmed for that specific request.
Confirm the switch, PoE load and uplink plan before you buy
Share your required quantity, powered endpoint list, SFP+ link details, FortiGate model and support expectations. FourTeck can help validate the FS-124F-POE configuration and prepare a UAE quotation around the complete requirement.
Reviews
There are no reviews yet.