Fortinet FortiAP FAP-23JF Wireless Access Point in Dubai, UAE
The FAP-23JF brings wireless access and room-edge Ethernet connectivity into a compact indoor wall-plate format. It is particularly relevant when a business wants Wi-Fi close to users without relying on a ceiling-mounted access point in every room, while keeping management aligned with a Fortinet network architecture.
Before you request a quotation
Confirm the number of rooms or zones, available PoE, FortiGate or cloud-management preference, required wired endpoints, regional suffix and whether installation or configuration is part of the project.
Direct answer: what is the FAP-23JF?
The Fortinet FortiAP FAP-23JF is an indoor Wi-Fi 6 access point built in a wall-plate form factor. Fortinet positions it for room-oriented environments, with hotel rooms highlighted as a primary client setting. It uses a 2×2 internal-antenna design, three radios, four Gigabit Ethernet ports and 802.3at PoE. A buyer should consider it when wireless coverage needs to be delivered close to room occupants and the installation benefits from local Ethernet connectivity. Before proceeding, confirm the correct country-code suffix, controller or cloud-management design, switch PoE capability, support contract, wired-port requirements and whether the project needs newer Wi-Fi 6E or Wi-Fi 7 functionality instead.
What it does in a room-based network
A wall-plate access point solves a different placement problem from a conventional ceiling AP. Instead of broadcasting from a shared corridor or overhead location, the unit can be positioned closer to the people and devices that need service inside the room or local zone. That can be useful when walls, room layouts and corridor geometry make centralised ceiling placement less convenient.
The FAP-23JF also includes multiple Gigabit Ethernet ports, so the deployment can support a mixture of wireless and wired endpoints near the same room edge. This is relevant in hospitality, serviced living, branch rooms and compact office zones where televisions, phones, workstations, room controllers or other Ethernet devices may coexist with laptops and mobile clients. The exact port role and downstream-power requirement should be documented before ordering so the switch, cabling and power design matches the intended use.
Who should shortlist it
The strongest fit is an organisation planning room-level indoor wireless coverage within a Fortinet-managed network. Hotels and similar accommodation projects are an obvious example because Fortinet identifies hotel rooms as the majority-client scenario for this model. It may also suit serviced apartments, student accommodation, patient or consultation rooms, smaller branches, meeting rooms and workspaces where the wall position is useful.
It is less suitable when the design calls for outdoor protection, very high-density public areas, wide open spaces that are better served by ceiling APs, or an explicit requirement for 6 GHz operation or Wi-Fi 7. In those cases, a newer or differently shaped FortiAP model may be a better starting point. FourTeck can help compare the room count, radio-density objective, existing FortiGate platform, switch power budget and upgrade horizon before the model is included in a bill of materials.
Business challenges this wall-plate design can address
Room-by-room coverage
Dense internal walls can make corridor-only coverage difficult to plan. A room-level AP can bring the radio closer to occupants, subject to a proper survey and channel plan.
Mixed wired and wireless devices
Multiple Gigabit Ethernet ports make it easier to plan local wired endpoints beside Wi-Fi clients instead of treating room connectivity as wireless-only.
Centralised policy control
FortiGate-managed FortiAP deployments can keep wireless configuration and security policy within the broader Fortinet LAN design, reducing the need for a completely separate WLAN control plane.
Space-conscious installation
A wall-plate form factor can be more appropriate than a prominent overhead unit in guest rooms or small spaces where interior layout matters.
Product-fit decision matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Room-level Wi-Fi | Coverage is needed inside individual indoor rooms or compact zones. | Wall location, RF survey findings, room count and required AP density. |
| Wi-Fi generation | Wi-Fi 6 meets the client and lifecycle requirement. | Whether 6 GHz or Wi-Fi 7 is part of the project specification. |
| Wired room devices | Local Gigabit Ethernet ports are useful near the wireless coverage point. | Number of endpoints, VLAN mapping and any downstream PoE requirement. |
| FortiGate management | The network already uses or plans a compatible FortiGate controller role. | FortiOS/FortiAP compatibility and the FortiGate’s supported AP scale. |
| Cloud-managed deployment | A cloud-management model is preferred instead of direct FortiGate management. | Current Fortinet cloud-management license and support requirements. |
| Power | 802.3at PoE is available or a suitable alternative power method is selected. | Switch PoE budget, cabling path and any accessory required for the chosen power method. |
Verified product information for FAP-23JF
The table below uses current Fortinet ordering information for the exact FAP-23JF model. Where purchasing detail varies by region, management architecture or support choice, the dependency is stated rather than treated as a universal specification.
| Brand | Fortinet |
| Product | FortiAP FAP-23JF |
| Product type | Indoor wall-plate wireless access point |
| Wi-Fi generation | Wi-Fi 6 |
| MIMO / antennas | 2×2, internal |
| Radios | 3 |
| Ethernet ports | 4 × Gigabit Ethernet |
| Power over Ethernet | 802.3at |
| FortiGate management license | No separate AP management license is required when managed by FortiGate; FortiGate model limits and software compatibility still apply. |
| Cloud management | License dependent when the AP is not managed by FortiGate. Confirm current Fortinet offering and term. |
| FortiCare options | Premium, Elite and Essential support SKUs are listed for this model; term and entitlement should be confirmed for the quotation. |
| Hardware order form | FAP-23JF-suffix; the country-code suffix must match the regulatory domain. |
| Primary environment in Fortinet guidance | Hotel rooms / indoor room-based use |
| UAE availability | Contact FourTeck for current regional model, quantity, lead time and quotation. |
Configuration and compatibility dependencies
The model number alone is not enough to complete an order. Fortinet uses country-code suffixes for FortiAP hardware, and the suffix is tied to the country of deployment and its regulatory domain. For a UAE project, the applicable ordering suffix should therefore be confirmed at quotation time rather than copied from a US, European or other regional listing.
Management is another design decision. Fortinet’s current ordering guidance states that no additional AP management license is required when FortiAP is managed by FortiGate, but the FortiGate model has its own maximum supported AP counts and the software versions must be compatible. If cloud management is preferred instead, the current Fortinet cloud license and support arrangement should be included in the bill of materials. The organisation should also confirm how SSIDs, VLANs, guest access, segmentation, authentication and local Ethernet ports are intended to operate before installation.
Power planning matters because the FAP-23JF is specified for 802.3at PoE. The upstream switch must have adequate PoE capacity for the number of access points and any other powered devices connected to it. Do not assume that an existing switch has sufficient budget simply because it has PoE-labelled ports. Cable distance, patching, switch model, available power budget and any downstream device requirement should be checked as part of the network design.
A practical purchase and deployment journey
Map rooms and users
List guest rooms, work areas, wired devices, expected client types and locations where coverage is currently weak or absent.
Validate RF and placement
Use floor plans and, where appropriate, a site survey to decide whether wall-plate placement suits the construction, channel plan and target user experience.
Confirm management
Check FortiGate model capacity, software compatibility and desired central-management architecture, or define the cloud-management requirement.
Build the bill of materials
Confirm regional suffix, quantity, support, switching, power, mounting, cabling and any accessories required for each location.
Configure and test
Apply SSIDs, VLANs, security policy and port assignments, then validate coverage, roaming expectations, wired endpoints and operational monitoring.
Capability focus: Wi-Fi 6 where room placement matters
The FAP-23JF is a Wi-Fi 6 product rather than a 6 GHz or Wi-Fi 7 access point. That distinction is important because buyers often compare access points only by generation and miss the purpose of the form factor. In a room-based project, placement can be as important as headline radio capability. A wall plate located close to occupants may be a better physical design choice than a stronger ceiling unit placed outside the room, although the final result depends on building materials, interference, channel planning and client behaviour.
A buyer should therefore evaluate the FAP-23JF against the actual project objective: acceptable coverage and capacity inside the room, manageable interference between adjacent units, and a practical mounting and cabling method. If the project has a long refresh cycle and specifically requires 6 GHz spectrum or Wi-Fi 7 features, a newer FortiAP should be evaluated. If Wi-Fi 6 is sufficient and the wall-plate format directly solves the room-layout problem, the FAP-23JF can remain a relevant choice.
Capability focus: combining room-edge wired and wireless access
Four Gigabit Ethernet ports differentiate the FAP-23JF from access points designed only as a wireless termination point. In a guest room, serviced apartment, consultation space or compact office, this gives the network architect the ability to think about the AP as part of the room-edge connectivity plan rather than an isolated radio.
The benefit is operational only when the port design is planned. The project team should identify every intended wired endpoint, the VLAN it should use, whether it must be isolated from guest or employee Wi-Fi, and whether any downstream device expects power. It is also important to confirm the exact port behaviour available in the chosen software version and management mode. FourTeck can help translate the room-device list into switching, VLAN and configuration requirements so the AP is ordered as part of a complete connection design rather than as a standalone box.
Capability focus: management within the Fortinet LAN
The strongest architectural value appears when the access point is considered alongside the Fortinet management plane. FortiGate can act as a controller for FortiAPs, allowing wireless policy to sit closer to the same operational framework used for secure LAN and firewall functions. Fortinet’s current ordering guidance notes that a separate AP management license is not required for FortiGate-managed deployment.
That does not remove the need for design work. The FortiGate must support the intended number of access points and the chosen FortiOS/FortiAP versions must be compatible. Larger installations must also consider controller capacity, traffic design, redundancy expectations and ongoing operations. A cloud-management route is available as a different architecture and is license dependent. The selection should reflect the organisation’s existing network, remote administration model, IT skills and lifecycle plan rather than assuming one management approach is automatically preferable.
Where the FAP-23JF can fit well
Hotels and hospitality rooms
Fortinet specifically identifies hotel rooms as a primary client environment. The wall-plate design can bring Wi-Fi closer to the guest while supporting local wired room devices where required.
Serviced apartments and residences
Room-level connectivity can be useful where each unit needs a predictable local access point and a controlled set of wired connections. The RF plan should account for many neighbouring APs.
Healthcare and consultation spaces
Certain clinics or room-based facilities may value discreet indoor placement and local wired connections, subject to healthcare policy, device compatibility and site-specific radio planning.
Small branches and meeting rooms
A compact branch can use the wall-plate format where user groups are concentrated in defined rooms. Confirm whether the room density and expected client load are appropriate for a 2×2 Wi-Fi 6 design.
Integration and operational considerations
A wireless access point sits inside a larger system of switching, routing, security, authentication, IP addressing and monitoring. For that reason, the FAP-23JF should not be purchased by simply matching the number of rooms. A room may need an AP, but the network also needs enough switch ports, PoE budget, upstream bandwidth, VLAN capacity and controller scale to operate all of those access points together.
Start with the existing FortiGate and FortiSwitch environment if present. Check the FortiGate’s supported FortiAP count, current software train and planned upgrade path. Review whether the AP traffic is locally bridged or centrally handled according to the design, and document guest, staff, voice, IoT or building-system networks separately. Authentication requirements may include pre-shared keys, captive portal, enterprise identity or other methods; the correct policy depends on the organisation and cannot be assumed from the AP model.
For high room counts, the RF plan deserves equal attention. Adjacent wall-plate APs can create unnecessary contention if transmit power, channel assignment and installation density are not tuned to the building. A survey and post-install validation can identify coverage gaps, oversaturation and interference. Operational teams should also define how firmware is maintained, how configuration changes are approved, and who monitors AP health. FourTeck’s network and security services can be discussed as part of the project scope when planning, installation or configuration assistance is required.
Questions to resolve before you order
Is the wall-plate form factor correct?
Review the wall location, room construction, cabling point and user position. A model that fits the wall physically may still need RF validation.
Is Wi-Fi 6 enough for the refresh cycle?
If the specification demands 6 GHz or Wi-Fi 7, evaluate a newer model now instead of planning an early replacement.
What will use the Ethernet ports?
List every local device and its VLAN, security, bandwidth and power requirement. This avoids installing an AP without a complete room-port design.
Which platform will manage the AP?
Confirm compatible FortiGate management or the current cloud-management license. Include support and lifecycle responsibilities in the same decision.
Procurement checklist for FAP-23JF projects
Use this list before asking for the final quotation. It helps separate the access-point quantity from the infrastructure and service items that determine whether the deployment can be completed as planned.
How FourTeck can support sizing and quotation
FourTeck can help turn a product request into a more complete bill of materials. For an FAP-23JF project, that usually begins with the number of rooms, building type, current network platform and intended user experience. From there, the requirement can be checked against management, switching, PoE, regional suffix, support and installation needs.
This approach is useful because a quotation based only on access-point quantity may omit the practical dependencies that determine project cost. If the existing FortiGate can manage the planned AP count, that should be verified. If a new switch is required, its port count and PoE budget should be sized. If cloud management is preferred, the current license needs to be included. If the client wants installation or configuration support, the scope should define cabling condition, mounting, SSIDs, VLANs, testing and handover.
You can review more network and security products or send the project requirement to FourTeck for quotation coordination.
Information that makes the quote more accurate
Share the property or site type, number of rooms, preferred installation date, existing FortiGate and switch models, support term, wired-device list, expected management method and destination. If the project is a replacement, include the current AP model and the reason for the refresh. If a consultant has issued a wireless specification, provide the required Wi-Fi generation, radio design, port needs and controller architecture so any mismatch can be identified before the order is placed.
For multi-site hospitality or branch deployments, a site schedule is useful. It allows quantity, regional deployment, installation sequence and support requirements to be coordinated without assuming every location has the same cabling or power condition.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the FortiAP FAP-23JF. Availability may depend on the required country-code suffix, quantity, support entitlement and vendor lead time. Because Fortinet applies regulatory suffixes to FortiAP hardware, the exact item supplied for a UAE deployment should be confirmed during quotation rather than selected solely from an overseas product listing.
Delivery and project coordination can be discussed after the requirement is confirmed. If installation or configuration is required, include that scope in the quotation so the project can account for wall mounting, cabling readiness, PoE, controller configuration, SSIDs, VLANs and validation. FourTeck can also review whether the FAP-23JF remains appropriate for the planned refresh cycle or whether a newer FortiAP should be compared before purchase. Current price, lead time, support term and regional hardware should all be reconfirmed at the time of order.
Dubai, Abu Dhabi, Sharjah and Ajman project coverage
For organisations deploying room-based Wi-Fi in Dubai, Abu Dhabi, Sharjah and Ajman, FourTeck can coordinate requirement review, quotation preparation and project planning around the exact FAP-23JF quantity and supporting network components. The same product may be used in very different building conditions, so city location alone is not a sizing method. A hotel tower, serviced residence, clinic and small branch can each require a different AP density, switch design and installation approach. Share the site type, room count, current network, destination and required schedule so the bill of materials can be checked before procurement. Installation and configuration availability should be confirmed for the particular project scope rather than assumed as part of hardware supply.
GCC Availability
FourTeck can assist organisations planning FortiAP projects across the GCC with requirement review, product and license selection, quotation coordination and deployment planning. For an FAP-23JF request, the destination country matters because FortiAP hardware uses regulatory country-code suffixes, and the correct variant must be confirmed for the place of installation. Businesses in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman may also have different delivery, service and project conditions. Availability, licensing, support entitlement, delivery schedules, installation scope and vendor lead times can vary by country, model and quantity. When requesting a GCC quotation, share the destination country, FAP-23JF quantity, required support term, management method, existing FortiGate and switching environment, installation locations and target timeline. FourTeck can then help coordinate a more accurate bill of materials and identify whether accessories, cloud management, configuration or deployment assistance should be included. For regional enquiries, the FourTeck Kuwait resource may also be relevant.
Africa Availability
For projects in Africa, FourTeck can help organisations evaluate whether the FAP-23JF is suitable for the intended room-based wireless design and coordinate the related procurement requirements. A regional project should start with the destination country, quantity, expected deployment schedule, management architecture and support needs. Availability and fulfilment can depend on hardware suffix, regional regulatory requirements, vendor lead time, shipping arrangements, power and switching design, installation scope and local project conditions. This is especially important for multi-site hospitality or branch rollouts where every property may not have the same cabling, PoE capacity or controller platform. FourTeck can assist with product comparison, support options, accessories, deployment planning and quotation preparation without assuming local inventory or fixed delivery timing. Buyers in East Africa can also review FourTeck Kenya and FourTeck Uganda, while broader regional enquiries can use the FourTeck Africa resource.
Related options and supporting services
FortiAP 23JK
A newer wall-plate FortiAP option that should be compared when Wi-Fi 7 is part of the lifecycle or client requirement. Model selection must be based on current specifications and compatibility.
FortiGate secure LAN controller
Relevant when the access points will be centrally managed by FortiGate. Controller capacity, traffic handling and software compatibility need to match the AP estate.
PoE switching
A suitable PoE switch may be required to power multiple FAP-23JF units. Size both the number of ports and the total power budget instead of considering port count alone.
Wireless planning and configuration
Site survey, channel planning, SSID and VLAN configuration, testing and handover can be discussed as project services where required.
For broader Fortinet requirements, review the FourTeck Fortinet UAE information and Fortinet firewall solutions in Dubai. Related products should be selected for a defined architecture; compatibility should not be inferred from brand alone.
How buyers are evaluating the FAP-23JF today
Most buyers searching for the FortiAP FAP-23JF are not simply asking whether it is a Wi-Fi 6 access point. They are trying to determine whether a wall-plate AP still fits a new project, what management is required, how it compares with newer FortiAP generations, which regional SKU is correct, whether local Ethernet devices can share the room connection, and what information is needed for a real quotation. Those questions are more useful than a generic feature list because they decide whether the model fits the building and the organisation’s lifecycle plan.
Is FAP-23JF still a practical choice if newer FortiAPs exist?
Yes, when the requirement is specifically a Wi-Fi 6 wall-plate deployment and the client, spectrum and lifecycle needs do not demand Wi-Fi 6E or Wi-Fi 7. Newer is not automatically better for every room, but it can be the better long-term choice when the project specification includes 6 GHz, Wi-Fi 7, a longer refresh horizon or higher radio-performance expectations. This is why FourTeck recommends comparing the requirement rather than replacing the model name with the newest available AP.
What does a wall-plate AP change in network design?
It shifts the coverage point closer to the room and can also provide local Ethernet connectivity. That can simplify the room-edge design, but it increases the number of APs in close proximity and makes radio planning important. Hotels and residences may have dozens or hundreds of similar rooms, so access points should not simply be set to maximum transmit power. The design needs controlled channels, appropriate power levels, sufficient upstream switching and a consistent configuration model.
A frequent buying question is whether FortiGate is mandatory. Fortinet supports FortiGate-managed FortiAP deployment and also offers cloud-management options. The current ordering guide states that a separate AP management license is not required when the unit is managed by FortiGate, but the FortiGate itself must be a suitable controller for the quantity and software version involved. A cloud-managed design has a different licensing model, so businesses operating distributed properties should compare operational preference, recurring license requirements, controller availability and remote support procedures.
Buyer insight: price is only one line in the project cost
Public listings can show widely different FAP-23JF prices because region code, seller, tax, support, stock condition and listing age vary. A business quotation should therefore identify the exact regional hardware, support term, quantity and delivery destination rather than treating a marketplace price as the final project cost. Switching, PoE, cabling, installation, configuration and support may represent a significant part of the complete deployment.
Another common question is whether the four Gigabit Ethernet ports mean the access point can replace every room switch requirement. That depends on the device mix and desired network segmentation. The ports are useful, but the project still needs VLAN and policy planning, and any downstream power requirement must be validated. A hospitality room with a television, phone and building device has a different design from a branch meeting room with one wired workstation. List the endpoints first, then decide how each port should be configured.
Regional model selection is also important. Fortinet identifies the hardware as FAP-23JF followed by a country-code suffix. The correct suffix is determined by the regulatory domain of the deployment country, so a buyer in the UAE should not automatically order a part number copied from a US or European listing. This matters for lawful radio operation and procurement accuracy. FourTeck can confirm the current UAE ordering option as part of the quotation.
For a new installation, buyers should prepare more than a room count. Useful inputs include floor plans, wall construction, expected client numbers, existing Wi-Fi complaints, FortiGate and switch models, PoE availability, wired devices, support expectations and the desired management approach. When those details are available, the conversation can move from “How much is one FAP-23JF?” to “What is the correct bill of materials for this property?” That produces a more reliable decision and makes it easier to compare the FAP-23JF with a newer wall-plate model on equal terms.
Questions that help prevent the wrong access-point purchase
Do I need one FAP-23JF in every room?
Not automatically. Room count is a useful starting input, but AP density should follow the building layout, wall attenuation, expected client load and service objective. Some designs place an AP in each room; others use a different pattern. A survey or predictive plan helps avoid both coverage gaps and excessive co-channel interference.
Can my current PoE switch power the project?
It may, but verify more than the presence of PoE ports. The FAP-23JF uses 802.3at PoE, so the switch must provide the required standard and enough total power budget for all APs plus other powered devices. Large room counts can expose a power-budget shortfall even when enough physical ports are available.
What should I send when asking for a quotation?
Send the destination, quantity, building type, room count, FortiGate model, switch model, required support term, management preference and any installation or configuration scope. If there are wired devices in each room, include that list as well. These details allow the quotation to address dependencies rather than pricing only the AP hardware.
Should I choose FAP-23JF or a Wi-Fi 7 wall-plate model?
Choose based on client requirements, refresh cycle, spectrum strategy, controller compatibility and budget. If Wi-Fi 6 is sufficient and the existing design is standardised on FAP-23JF, continuity may matter. For a greenfield or long-lifecycle project, comparing the current Wi-Fi 7 wall-plate option can reduce the risk of an early technology refresh.
Can I use an overseas FAP-23JF suffix in the UAE?
Do not assume so. Fortinet uses country-code suffixes tied to regulatory domains. The UAE order should be matched to the correct current regional variant. FourTeck can confirm the appropriate suffix during quotation rather than relying on a part number shown by an overseas marketplace.
What happens after the hardware arrives?
The AP still needs mounting, network connectivity, power, controller authorisation, SSID and VLAN configuration, security policy and testing. If the project includes many rooms, define a repeatable template and acceptance checklist. FourTeck can discuss configuration and installation scope if the internal team does not want hardware-only supply.
Why businesses contact FourTeck for FortiAP projects
The value of assistance is not a claim that every network needs consulting. It is the ability to check the dependencies that sit around the product. FourTeck can help clarify whether the requested model matches the physical environment, confirm the regional ordering requirement, review FortiGate and switching inputs, identify support and cloud-management items, and structure a quotation that reflects the actual project rather than the hardware line alone.
This is especially useful when a business is refreshing an older property, standardising multiple branches, moving from a different wireless vendor, or deciding between the FAP-23JF and a newer wall-plate FortiAP. The team can discuss bill-of-material preparation, configuration scope, installation planning, migration sequencing and support coordination. No compatibility, delivery or deployment outcome should be assumed until the current environment and requirement have been reviewed.
Frequently asked questions
What is the Fortinet FortiAP FAP-23JF?
It is an indoor Wi-Fi 6 wall-plate access point in the FortiAP portfolio. Fortinet lists it with a 2×2 internal-antenna design, three radios, four Gigabit Ethernet ports and 802.3at PoE, with hotel rooms identified as a primary deployment environment.
Is the FAP-23JF a Wi-Fi 6 or Wi-Fi 7 access point?
The FAP-23JF is a Wi-Fi 6 access point. Buyers who require 6 GHz operation or Wi-Fi 7 should compare a current FortiAP model designed for those capabilities before ordering.
Does FAP-23JF require a separate license when managed by FortiGate?
Fortinet’s current ordering guidance states that no separate AP management license is required for FortiGate-managed deployment. FortiGate model capacity, FortiOS compatibility and any support entitlement still need to be confirmed.
Can the FAP-23JF be cloud managed?
Yes, Fortinet lists a cloud-management option for FortiAPs when they are not managed by FortiGate. The current license SKU, term and support arrangement should be confirmed at quotation time.
What power does the FAP-23JF need?
Fortinet specifies 802.3at PoE for the model. Confirm that the upstream switch or selected power accessory supports the requirement and that the total PoE budget covers the planned number of access points.
How many Ethernet ports does the FAP-23JF have?
Fortinet’s ordering guide lists four Gigabit Ethernet ports. The intended use of those ports, VLAN assignment and any downstream device requirements should be documented during design.
Is the FAP-23JF suitable for hotel rooms?
Yes. Fortinet specifically positions the FAP-23JF as an indoor wall-plate model and identifies hotel rooms as a primary client environment. Actual AP density and placement should still be validated for the building.
Which FAP-23JF country-code suffix should I order for the UAE?
The correct suffix should be confirmed for the UAE regulatory domain at the time of quotation. Do not assume that a suffix shown on an overseas product listing is appropriate for a UAE deployment.
What should I provide FourTeck for an FAP-23JF quotation?
Provide quantity, destination, site type, room count, FortiGate and switch models, management preference, support term, wired-device requirements, target timeline and whether installation or configuration support is needed.
Confirm the right FAP-23JF configuration before ordering
Send FourTeck your room count, destination, existing FortiGate and switching information, expected management method, support requirement and project timeline. The team can help confirm the regional model, compare suitable alternatives where needed and prepare a quotation that includes the relevant hardware, support and project scope.
Reviews
There are no reviews yet.