HPE Aruba Networking CX 6100 Series · JL676A
HPE Aruba Networking CX 6100 48G 4SFP+ Switch in Dubai
A 48-port non-PoE access switch for branch and SMB networks that need Gigabit Ethernet edge connectivity, four 1/10GbE uplinks and the AOS-CX operating model.
What is the HPE Aruba Networking CX 6100 48G Switch?
The HPE Aruba Networking CX 6100 48G 4SFP+ Switch, part number JL676A, is a fixed 1U Layer 2 access switch for enterprise branches and small to midsize business networks. It is mainly used to connect wired endpoints through 48 Gigabit Ethernet ports and provide aggregation or upstream connectivity through four 1/10GbE SFP/SFP+ ports. It suits organizations that need a high port count but do not need the switch to supply PoE to phones, cameras or wireless access points. The most important purchasing check is therefore the endpoint power requirement, followed by uplink optics and management choice. FourTeck can help determine whether JL676A is the right non-PoE model, which transceivers and accessories are needed, and whether an optional Central or NetEdit subscription should be included.
Where JL676A Fits in a Business Network
JL676A is positioned as an entry-level access switch within the CX 6100 family. Its 48 copper ports make it useful where a wiring closet must serve many standard Ethernet endpoints, while the four 1/10GbE uplinks provide flexible connections toward aggregation switches, servers or other network infrastructure. The model is especially relevant when power is provided separately to endpoints or when most connected devices do not require PoE.
The switch supports enterprise access functions including VLANs, access control lists, quality of service, IPv4/IPv6 operation and static routing. It is not intended to replace higher-tier campus switches when a design calls for broader Layer 3 routing, more advanced resiliency, higher interface speeds or larger scale. Those requirements should be assessed before the bill of materials is finalized.
Verified Technical Specifications for JL676A
| Manufacturer | HPE Aruba Networking |
|---|---|
| Model / Part Number | CX 6100 48G 4SFP+ Switch / JL676A |
| Access Ports | 48 × 10/100/1000BASE-T |
| Uplink Ports | 4 × 1G/10G SFP/SFP+ |
| Console / Host Interfaces | 1 × USB-C console port; 1 × USB Type-A host port |
| PoE | Not provided on JL676A |
| Switching Capacity | 176 Gbps |
| Throughput | 98.6 Mpps |
| Memory / Flash | 4 GB DDR3 / 16 GB eMMC |
| MAC Table | 8,192 entries |
| Power Supply | Fixed 65W power supply |
| Cooling | Fixed fans |
| Dimensions | 4.39 cm H × 44.2 cm W × 24.74 cm D |
| Configuration Weight | 3.42 kg |
| Operating Temperature | 0°C to 45°C up to 1.5 km altitude; derating applies above that altitude |
AOS-CX Management
The CX 6100 uses AOS-CX. Local administration can be performed through the web GUI and CLI, while REST APIs support programmable workflows. This makes the model easier to align with organizations already standardizing on the Aruba CX operating model.
Traffic Control and Segmentation
The platform supports VLAN segmentation, QoS, access control lists and common spanning-tree functions. These capabilities help separate business traffic and prioritize time-sensitive applications, but the network policy still needs to be designed and configured for the specific environment.
1/10GbE Uplink Flexibility
Four built-in SFP/SFP+ uplink ports can operate with supported 1G or 10G transceivers. The exact optics or direct-attach cables should be selected around distance, fiber type, peer interface and vendor support requirements.
Licensing and Subscription Considerations
The base CX 6100 switching functionality does not require a software license. Optional management services are separate decisions. HPE documentation lists Aruba Central subscriptions for CX 6100 management and separate NetEdit licensing for NetEdit use.
Before ordering, decide whether the switch will be managed locally or as part of a wider centrally managed Aruba environment. If Central or NetEdit is required, the correct subscription term and scope should be added to the quotation rather than assumed to be included with the hardware.
Product-Fit Matrix
| Requirement | JL676A May Fit When | Confirm Before Ordering |
|---|---|---|
| High copper port count | Up to 48 1GbE wired endpoints are required at the access layer | Current and expected port utilization |
| PoE requirements | Endpoints use separate power or do not require PoE | Whether phones, APs, cameras or IoT devices need switch power |
| Uplink speed | 1GbE or 10GbE SFP/SFP+ uplinks are sufficient | Fiber type, distance, optics and peer-port capability |
| Management | AOS-CX local management or optional Central/NetEdit matches the operating model | Subscription and operational tooling requirements |
When Another CX 6100 Model May Be More Suitable
Choose a PoE-capable CX 6100 model instead when the access switch must power devices such as wireless access points, IP phones or security cameras. The CX 6100 48G Class4 PoE 4SFP+ models provide the same general 48-port access role with PoE budgets that vary by model. If only 24 access ports are needed, a 24-port CX 6100 can reduce unnecessary capacity.
A higher-tier Aruba CX family should be evaluated when the design calls for more advanced Layer 3 routing, greater scale, higher-speed uplinks, broader redundancy choices or functions beyond the CX 6100 access-switch scope. FourTeck can compare the requirement against nearby models before a purchase decision is made.
Compatibility, Optics and Installation Checks
JL676A includes mounting brackets and supports up to four SFP/SFP+ 1/10G transceivers. Optics are selection-dependent and should be matched to the uplink medium and distance. HPE documentation also describes an unsupported-transceiver mode, but use of unsupported optics or cables does not provide HPE warranty or support for those transceivers or cables. For business deployments, supported optics are normally the safer procurement choice.
Rack depth, airflow, ambient temperature, power source and cable routing should be reviewed during installation planning. The fixed-fan design also means the switch should be deployed in an appropriate wiring or equipment environment rather than treated as a silent desktop device.
What to Confirm for a Dubai or UAE Quotation
- Exact JL676A model requirement
- Required quantity and deployment sites
- Number and type of wired endpoints
- Whether any endpoints require PoE
- 1G or 10G uplink requirement
- Fiber type and uplink distance
- Required SFP/SFP+ optics or DAC cables
- Rack and power-cord requirements
- Local, Central or NetEdit management approach
- Configuration and VLAN requirements
- Installation or migration scope
- Support coverage and project timing
How FourTeck Can Assist
FourTeck can help business buyers validate whether the HPE Aruba Networking CX 6100 48G JL676A is appropriate for the intended access-layer design, review port and uplink requirements, identify suitable transceivers, and compare non-PoE and PoE variants. Configuration scope can also be discussed for VLANs, uplinks, management access and integration with the existing network.
For broader project planning, explore FourTeck technology products, review installation and configuration services, or contact FourTeck for product sizing and quotation support.
UAE Availability Guidance
Contact FourTeck to confirm current UAE availability for JL676A. Availability can depend on quantity, regional ordering variant, power-cord selection and vendor lead time. Delivery coordination, optics, subscriptions, configuration and installation should be included in the requirement where needed so the quotation reflects the complete deployment rather than only the base switch.
Buyer Questions
Does JL676A provide PoE?
No. JL676A is the 48-port non-PoE CX 6100 model. Select a Class 4 PoE variant when endpoints must receive power from the switch.
Are the uplinks 10GbE capable?
Yes. The four built-in uplink ports support 1G or 10G SFP/SFP+ operation with appropriate transceivers or supported cables.
Is a software license required for the base switch?
The base CX 6100 switching functionality does not require a software license. Optional Aruba Central and NetEdit capabilities use separate subscriptions or licenses.
Can FourTeck supply the optics as part of the quotation?
Optics can be included after the required speed, fiber type, distance and peer interface are confirmed. This avoids selecting a transceiver that does not match the link design.
Is JL676A suitable for a branch office?
It can be a strong fit for a branch that needs up to 48 Gigabit Ethernet access connections, 1/10GbE uplinks and no PoE. Larger routing or redundancy requirements may justify evaluating another CX family.
What information helps produce an accurate UAE quote?
Provide quantity, site requirements, PoE needs, uplink speed and distance, required optics, management preference, installation scope and support expectations.
Confirm the CX 6100 48G Configuration Before Ordering
Share your port count, uplink design, optics, management and installation requirements so FourTeck can prepare a more complete Dubai/UAE quotation for JL676A.
Reviews
There are no reviews yet.