HPE Aruba Gateway Replacement in Dubai, UAE
Replacing an Aruba gateway can be a simple hardware exchange, a Central device-replacement task, or a wider architecture migration. FourTeck helps businesses identify which case applies, confirm dependencies, select a suitable replacement path, and coordinate the quotation and implementation scope without treating every gateway project as a like-for-like swap.
Start with the installed gateway
Share the current model, software version, site role, AP count, subscriptions, redundancy design, and reason for replacement. That information is more useful than choosing a new appliance from model names alone.
Direct answer: what does an Aruba gateway replacement involve?
HPE Aruba gateway replacement is the process of removing or retiring an existing Aruba mobility controller or gateway and putting a suitable supported gateway, replacement appliance, or revised architecture in its place. It is mainly used to recover from hardware failure, refresh an ageing platform, resolve scale or port limitations, or move toward an AOS 10 and HPE Aruba Networking Central operating model. Organisations with controller-based WLAN, branch gateways, SD-Branch, tunneled traffic, VPN concentrator functions, or policy enforcement should plan the change carefully. Before proceeding, confirm the current hardware, software release, AP design, interface requirements, subscriptions, high-availability method, authentication services, WAN/LAN routing, and acceptable outage window.
What the replacement service actually does
The service translates a technical replacement need into a controlled project. That starts by identifying the role of the existing unit. An Aruba appliance may be terminating AP tunnels, providing a campus gateway datapath, operating as a branch gateway, supporting SD-WAN, acting as a VPN concentrator, enforcing user roles, or participating in a redundant pair or cluster. Replacing it without understanding that role can create a technically compatible purchase that is operationally wrong.
FourTeck can review the present gateway and the surrounding network, map the functions that must continue, identify candidate current HPE Aruba Networking gateway families, and define the hardware, subscriptions, accessories, configuration, staging, and migration tasks that belong in the quotation. The goal is not to assume that the newest appliance is automatically the correct one; it is to create a replacement path that fits the current network and intended future architecture.
Who should consider it
This service is relevant to IT teams, network managers, procurement teams, managed-service providers, integrators, hotels, education environments, healthcare organisations, offices, warehouses, retail networks, campuses, and multi-branch businesses operating Aruba infrastructure. It is particularly useful when an old controller has failed, an existing gateway is approaching a lifecycle or support decision, the organisation is increasing AP density, a site is moving toward Central management, or a redesign is required to support new WAN, segmentation, or resilience requirements.
It is also suitable when the business has inherited an Aruba network with incomplete documentation. In that situation, a replacement should begin with discovery rather than with an order. The model label alone does not reveal how the device is being used, which VLANs terminate on it, where authentication requests originate, how APs discover the controller or Central, or what dependencies must be replicated on the new design.
Common business problems and the replacement response
Failed or unstable gateway
Determine whether the requirement is a supported replacement, spare activation, repair pathway, or move to a new model. Recovery planning should also consider current configuration, license state, site assignment, and fallback connectivity.
Capacity or interface limit
Re-size the platform using real traffic, AP counts, client expectations, uplink needs, cluster design, and future growth rather than choosing a replacement solely by generation.
AOS 8 architecture transition
AOS 10 changes the operating model. HPE guidance describes AOS 8 mobility controllers as gateways in AOS 10 and requires Central for management of AOS 10 APs and gateways, so planning can extend beyond hardware.
Incomplete documentation
Create an inventory of interfaces, VLANs, routes, AAA dependencies, redundancy, certificates, WAN services, AP modes, management tools, and licenses before attempting a cutover.
Replacement-fit decision matrix
| Business situation | Relevant assistance | Confirm before ordering |
|---|---|---|
| Existing gateway has failed | Replacement compatibility, inventory status, configuration recovery and staged cutover | Old model, serial, software, license assignment, saved configuration, HA peer and site role |
| Gateway is ageing but stable | Refresh design, capacity review and phased migration | Future AP scale, uplinks, lifecycle objectives, management platform and maintenance window |
| Moving from AOS 8 toward AOS 10 | Architecture assessment, Central readiness, configuration recreation and validation | Supported hardware, AP models, Central subscriptions, firewall reachability, AAA and datapath design |
| Branch or SD-WAN gateway replacement | WAN/interface review, replacement workflow planning and service restoration | Circuit handoff, WAN addressing, tunnels, VRFs, routing, policy, licenses and branch dependencies |
| Campus capacity expansion | Gateway family sizing, clustering and cutover architecture | Client scale, AP scale, throughput, redundancy, optics, rack/power and segmentation requirements |
Buyer information table
This is a service and solution page, so the correct evaluation is based on project information rather than one blended specification table. HPE currently presents several gateway families for different use cases, including 9000 Series gateways, 9100 Series Hybrid Gateways, and 9200 Series Campus Gateways. The exact replacement model must be selected from the requirements of the installed environment.
| Topic | HPE Aruba Gateway Replacement in Dubai |
|---|---|
| Main purpose | Plan and coordinate the replacement, refresh, or migration of an HPE Aruba Networking controller or gateway. |
| Suitable for | Campus WLAN, distributed branch networks, gateway-based policy enforcement, tunnel-mode deployments, VPN concentrator roles and SD-Branch environments. |
| Assessment support | Existing model, software, interfaces, topology, role, scale, redundancy, routing, authentication, management and subscriptions. |
| Planning support | Replacement path, bill of material, Central readiness, migration phases, outage planning and rollback approach. |
| Configuration support | Configuration scope is requirement dependent and should be explicitly included in the quotation. |
| License guidance | Subscription and license requirements depend on architecture, platform, software release and HPE policy. |
| Availability guidance | Contact FourTeck to confirm current UAE model availability, quantity, lead time and service scheduling. |
| Important note | Do not assume an old Aruba controller can be replaced by any current gateway without checking software support, role, scale, ports, licensing and migration architecture. |
Configuration, licensing and compatibility dependencies
Gateway projects are highly dependent on the operating model. HPE documentation for AOS 10 states that devices must be supported on AOS 10 and be present in the HPE GreenLake inventory with an applicable Central service and subscription before migration. In controller-managed AOS 8 environments, moving to AOS 10 introduces a substantial management change because Central becomes the management platform and the AOS 8 configuration must be recreated in Central. Those conditions make a migration different from replacing a failed unit within an unchanged architecture.
For branch gateway replacement in Aruba Central, HPE also provides a device-replacement workflow that checks whether the new device is an acceptable match. HPE identifies model match and valid license assignment among the conditions that can affect compliance. This is useful guidance, but it does not mean every project can use the same replacement workflow. Older controllers, unsupported hardware, new gateway families, branch redesigns, AOS upgrades, and major topology changes can require a different approach.
Before ordering, confirm whether the requirement is physical failure replacement, capacity refresh, operating-system migration, branch-gateway replacement, campus-gateway refresh, or full architecture transition. Also check whether ClearPass, external RADIUS, DHCP, DNS, certificates, firewall policies, WAN routing, VRFs, AP tunnel modes, AirWave, Mobility Conductor, API integrations, or monitoring systems are part of the existing dependency chain.
A practical replacement and migration journey
Discover
Document the existing gateway role, software, APs, VLANs, routing, authentication, certificates, subscriptions, ports, WAN handoffs and redundancy. Capture configurations and recovery information where available.
Design
Decide whether the target is like-for-like restoration, same-architecture refresh, Central device replacement, or a new AOS 10 design. Select the model family only after the architecture is clear.
Stage
Prepare inventory, subscriptions, Central assignment, software, group/site structure, interfaces, routing, AAA changes and test configuration as required. Validate prerequisites before touching production.
Cut over
Execute the approved maintenance plan, move cables or circuits, apply configuration, restore services, confirm AP and client operation, validate policies and maintain a rollback decision point.
Verify
Check client authentication, tunnel formation, routing, WAN reachability, DHCP/DNS, policy enforcement, monitoring, logs, failover behaviour and application connectivity. Update diagrams and support records after acceptance.
Capability focus: preserve the real network role
A replacement project succeeds when the new design preserves the functions the business relies on, not merely the device name. For a campus controller or gateway, that may include tunneled WLAN traffic, user-role enforcement, redundancy, uplink routing, or integration with authentication services. For a branch gateway, the role can extend to WAN connectivity, VPN, SD-Branch and local network services. A replacement checklist should therefore map every live function to the target architecture.
This matters because a gateway can be physically connected and still fail operationally if a supporting dependency is missed. A RADIUS server may expect requests from specific network access device addresses. A firewall may allow the old management path but not the new Central communication requirement. VLAN trunks may have been built around a particular datapath. Monitoring may depend on an older management appliance. By documenting these relationships in advance, the project can test the right outcomes after cutover instead of discovering dependencies during an outage.
Capability focus: plan the AOS 8 to AOS 10 change correctly
HPE’s migration guidance makes clear that an AOS 10 migration is an architectural task. The mobility controller becomes a Gateway in AOS 10 terminology, and Central manages AOS 10 APs and gateways. Existing AOS 8 configuration is not simply carried across as an unchanged controller configuration; the required configuration must be prepared in Central. Hardware support and subscriptions also need validation.
For buyers, this changes the purchasing conversation. An organisation may not need only a replacement chassis; it may need Central subscriptions, compatible AP planning, policy migration, authentication updates, Internet reachability from management networks, and a phased change plan. Some customers may decide to remain temporarily on an AOS 8 design while replacing failed hardware, while others may use the replacement event as a controlled opportunity to modernise. The correct choice depends on supported hardware, business timeline, network risk, licensing, and the target architecture.
Capability focus: treat Central and subscriptions as part of the design
Cloud management is not a decorative add-on in an AOS 10 gateway project. HPE describes Central as the management and monitoring platform for AOS 10 hardware, and its onboarding guidance includes inventory and subscription steps. That means procurement should confirm the Central tenant, device inventory, license or subscription assignment, group and site structure, and network reachability before the replacement window.
For an existing Central-managed branch gateway, HPE’s device replacement workflow can transfer items such as group, site, labels, licenses, VRF assignment, configuration and firmware assignment when conditions are met. However, buyers should not assume that every gateway replacement can be automated. The new device must be an appropriate match, and the actual migration method depends on the old and new models, architecture, software level, licensing, and whether the project is a fault replacement or a platform transition.
Where replacement planning is most useful
Enterprise campus
For controller or gateway estates carrying tunneled wireless traffic, user roles, segmentation and high client volumes. Replacement should be sized around actual AP and user growth and the intended redundancy model.
Distributed branches
For sites using Aruba gateways for branch connectivity, SD-WAN or local network services. WAN circuits, IP addressing, VPN paths and local failure recovery are critical inputs.
Hospitality and guest networks
For environments where a gateway change must preserve guest access, authentication, VLAN design, roaming, captive services and business-critical application connectivity.
Education and multi-building sites
For large AP populations and mixed user groups where a refresh can affect authentication, segmentation, monitoring and the physical underlay across several buildings.
Integration and operational considerations
A gateway sits at the intersection of wireless access, switching, routing, authentication and management. The replacement plan should therefore identify systems outside the gateway that will be affected. ClearPass or another RADIUS platform may need network-access-device entries or source-address changes. DHCP relay and DNS reachability must be preserved. Upstream switches must have the correct trunks, LACP settings, port speed and optics. WAN circuits may require fixed handoff parameters. Firewalls may need new management or cloud-destination access. Monitoring and logging systems may expect SNMP, syslog, API, or Central-based telemetry.
High availability deserves separate review. A two-device or clustered design should not be treated as two independent replacements. The team needs to understand failover state, peer relationships, configuration synchronisation, gateway capacity during a one-device maintenance state, and how traffic is expected to reconverge. Where the replacement changes model or software generation, the supported HA design should be confirmed before hardware is ordered.
Physical details matter as well. Rack space, power feeds, PSU configuration, copper or fibre interfaces, optics, patch leads, console access and out-of-band management can affect the ability to complete the change within the planned window. These items are inexpensive compared with a gateway but can stop a cutover if they are missing.
Questions to resolve before requesting a quotation
Model and release determine support, migration options, replacement compatibility and the correct terminology for the target design.
Campus tunnel termination, branch gateway, SD-WAN, VPN concentrator, policy enforcement, routing and redundancy requirements lead to different selection decisions.
A fault replacement in an existing architecture has a different scope from a move to AOS 10 and Central.
Central and device subscriptions should be reviewed so the quotation does not omit a required service or duplicate an existing entitlement.
The available maintenance window influences staging, testing, fallback design and whether a parallel build is practical.
Define the acceptance tests: AP status, client authentication, roaming, WAN, application access, policy, monitoring and redundancy.
Procurement checklist for an accurate replacement quote
✓ Exact existing gateway or controller model and part number
✓ Required replacement quantity and spare requirement
✓ Current ArubaOS or AOS version and target software direction
✓ AP model list, AP quantity and expected client scale
✓ Current Central, GreenLake, AirWave or Mobility Conductor management arrangement
✓ License or subscription details and expiry information where available
✓ Copper, fibre, SFP/SFP+ or other uplink requirements
✓ WAN circuit type, routing, VRF, tunnel and VPN requirements
✓ High-availability, clustering or standby requirement
✓ AAA, ClearPass, RADIUS, DHCP, DNS and certificate dependencies
✓ Rack, power, optic, cable and accessory needs
✓ Installation, staging, configuration and migration scope
✓ Desired maintenance window and rollback expectation
✓ Delivery destination and target project timeline
How FourTeck can assist
FourTeck can support the commercial and technical planning around an HPE Aruba gateway replacement. The engagement can begin with a requirement review, where the team records the old model, role, current management method, scale, interfaces, software, licensing and operational constraints. From there, the target approach can be defined: replace the unit within the current architecture, move to a current gateway family, prepare an AOS 10 transition, or separate an emergency restoration from a later modernisation project.
Assistance can include model-selection guidance, bill-of-material review, Central and license discussion, accessory identification, staging scope, configuration planning, migration steps, cutover coordination and post-change validation. These activities are not automatically included in every hardware quote; the required service scope should be stated so the quotation reflects the work that the customer expects.
For related network and security requirements, buyers can also review FourTeck technology products, explore network and security services, or send the existing gateway details through the FourTeck contact page.
UAE availability and project support guidance
HPE Aruba gateway availability in the UAE can vary according to the exact gateway family, regional part number, quantity, software or subscription requirement, accessories, and vendor lead time. FourTeck can review the requested replacement and help identify which current model or migration path should be quoted. Delivery and project coordination can be discussed after the exact requirement is confirmed. If installation, Central onboarding, configuration, migration or testing is required, include that scope in the quotation request rather than assuming it is part of the hardware supply.
For Dubai projects, the fastest route to a useful proposal is to provide the existing gateway model and a short explanation of why it needs to be replaced. If the old unit has failed, note whether a redundant peer is currently carrying traffic and whether a configuration backup is available. If the project is a planned refresh, provide the desired target date and any future growth or architecture changes so the new selection is not limited to reproducing the old capacity.
Dubai, Abu Dhabi, Sharjah and Ajman coverage
Businesses across Dubai, Abu Dhabi, Sharjah and Ajman can contact FourTeck for HPE Aruba gateway replacement planning, quotation coordination and related network services. The engagement can be organised around a single site, a central campus, multiple branches or a wider refresh programme. The practical requirement is to identify the destination, installed equipment, desired replacement date, whether site access is needed, and which work must be performed remotely or on location. Hardware availability and service scheduling should be confirmed against the specific project rather than assumed from the city. Where several UAE sites are involved, a phased schedule can be planned so device staging, configuration, change approval, installation and validation follow the same documented method while still accounting for site-specific circuit, rack, power and operational differences.
GCC Availability
FourTeck can assist organisations planning HPE Aruba gateway replacement projects across the GCC by reviewing the installed environment, identifying a suitable gateway or migration direction, coordinating quotations, and defining the hardware and service scope required for the destination. Projects may involve the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain or Oman, but the correct commercial and technical plan depends on the exact site rather than the country name alone. Model availability, regional part numbers, Central subscriptions, licensing policy, accessories, delivery schedules, vendor lead times and any on-site activity can vary by market and by project. Buyers should provide the destination country, existing Aruba model, required quantity, current software and management platform, license or subscription details, deployment location, and target replacement period. For multi-country estates, it is useful to standardise the technical design where appropriate while still validating power, connectivity, service access and local procurement conditions at each site. FourTeck can also coordinate related requirement reviews through its regional technology resources, including FourTeck Kuwait, where relevant.
Africa Availability
Organisations in Africa can approach FourTeck for HPE Aruba gateway replacement planning when they need to refresh a controller or gateway, recover a branch appliance, review an AOS 8 environment, or prepare a Central-managed target architecture. The support process can cover product evaluation, subscription and license review, accessory requirements, migration planning, configuration scope, remote coordination and the information needed for an accurate quotation. Availability and fulfilment depend on the destination, exact gateway model or family, quantity, license region, power and interface requirements, shipping arrangements, vendor lead time, and whether local installation or support activity is required. Buyers should share the destination country, current gateway details, site role, AP or client scale, preferred deployment schedule, and any implementation expectations before the proposal is prepared. East African projects can also be coordinated through FourTeck regional resources such as FourTeck Kenya and FourTeck Uganda, while broader requirements can be discussed through FourTeck Africa. No local inventory or delivery date should be assumed until the exact requirement is reviewed.
Related FourTeck options to consider
HPE Aruba 9000 Series gateway review
For branch and small-site requirements where a current 9000 Series option may match the role. Model and lifecycle suitability must be confirmed.
HPE Aruba 9100 Series Hybrid Gateway planning
For organisations evaluating a hybrid gateway platform for branch, cloud-managed wireless gateway or VPN concentrator roles. Exact model selection depends on interface and scale requirements.
HPE Aruba 9200 Series Campus Gateway sizing
For medium and large campus gateway requirements where higher scale, clustering, policy enforcement and future growth are part of the design discussion.
Aruba Central readiness and migration
For projects where the replacement is linked to AOS 10, Central onboarding, site and group design, subscriptions, and migration of management workflows.
Why businesses contact FourTeck for gateway replacement
Gateway replacement often begins as a procurement request but quickly becomes a network-design question. FourTeck’s useful role is to help clarify that question before hardware is ordered. The discussion can identify whether the business needs an emergency swap, a planned refresh, a migration to a new HPE Aruba Networking gateway family, or a phased AOS 10 transition. It can also expose dependencies that are easy to overlook, such as Central subscriptions, optics, rack power, ClearPass updates, AP support, routing, WAN circuits, certificates or redundancy.
Once the scope is understood, the quotation can separate hardware, subscriptions, accessories and implementation services so buyers know what is included. That makes procurement easier to evaluate and gives the technical team a clearer basis for change approval. The same approach can be used for a single Dubai site or a multi-location rollout. For company background and contact routes, visit about FourTeck or contact FourTeck UAE.
What buyers usually need to know before replacing an Aruba gateway
Most replacement searches begin with a model name or a fault, but buyers usually need answers to a wider set of questions: whether a current gateway is a direct replacement, whether the old configuration can be reused, whether Aruba Central is required, what happens to access points during the change, whether existing licenses transfer, how much downtime is likely, and which current gateway family fits the site. Those questions cannot be answered reliably from the old chassis label alone because the answer depends on software generation, deployment mode, management architecture, site function and the services attached to the gateway.
Is there a direct replacement model?
Sometimes there is a straightforward current equivalent; sometimes the correct answer is a different family or architecture. HPE currently lists 9000 Series, 9100 Series Hybrid and 9200 Series Campus Gateways for different roles and scales. A direct mapping should be based on the existing device role, throughput and client demand, AP scale, ports, redundancy and software direction. A model with higher headline capacity may still be wrong if its interfaces, licensing, deployment role or Central requirements do not match the project.
Can the old configuration simply be copied?
That depends on the replacement path. A like-for-like service replacement within the same supported architecture can be very different from moving an AOS 8 controller to AOS 10. HPE’s AOS 10 guidance states that Central becomes the management platform for AOS 10 APs and gateways and that AOS 8 configuration must be recreated in Central. Treating that migration as a config-file copy can miss changed management, datapath and feature behaviour.
Does Aruba Central matter for the purchase?
Yes when the target architecture relies on Central. The purchasing team should not separate the appliance from the management and subscription requirements. Confirm the Central tenant, inventory ownership, device subscription, group/site plan and Internet reachability needed for onboarding. These items can affect whether a replacement can be staged before it reaches the production rack.
What should be tested after the swap?
A successful boot is not an acceptance test. Validate AP state, wireless client authentication, DHCP and DNS, application access, role and policy enforcement, branch or campus routing, WAN and VPN paths, management visibility, logging, redundancy and any site-specific services. Build these checks before the change so the team knows how to decide whether the cutover is complete or a rollback is required.
Buyers also commonly ask about downtime. A fixed downtime cannot be promised without knowing the topology. A redundant design can allow staged replacement of one node at a time if the current state and supported procedure allow it, while a single gateway may require a service window. The amount of work also varies depending on whether the replacement is pre-staged, whether cables and optics are ready, whether configuration can be prepared in advance, and whether a software or architecture migration is being performed at the same time.
Another frequent concern is access-point compatibility. An Aruba gateway replacement is not always independent of the AP estate. If the project involves AOS 10, the AP models must be supported for the target software and the migration method depends on how those APs are currently operated. HPE’s migration guidance calls out different starting conditions for controller-managed AOS 8 APs, Instant APs managed by Central, locally managed Instant clusters and AirWave-managed environments. For that reason, FourTeck normally needs an AP inventory when the gateway replacement is part of a wider software transition.
Licensing questions are equally important. Buyers may ask whether existing controller licenses can simply move to the new gateway or whether a new Central subscription is needed. The correct answer depends on the existing and target architecture and current HPE policy. The safest purchasing method is to include existing entitlement information in the requirement review, then quote only the new subscriptions or licenses needed for the target design. This avoids making assumptions about transferability or inclusion.
For a quotation, send a compact evidence pack rather than a long narrative: current model and serial, software version, AP count and models, gateway role, interface list, network diagram if available, Central or AirWave status, license details, redundancy design, desired maintenance date and site location. Add the business reason for replacement—failure, lifecycle, capacity, refresh, new branch design or AOS 10 migration. With those details, FourTeck can respond with a better-defined combination of gateway options, required accessories, subscriptions and professional-service scope.
Decision questions that shape the replacement path
Should we replace the failed unit first or modernise the architecture now?
When a business is already in an outage or operating without redundancy, restoring a supported service may be the first priority. A broader AOS 10 or Central migration can then be scheduled with proper testing. If the network is stable and the replacement is planned, combining refresh and architecture migration may reduce duplicated work. The decision should be based on risk, hardware support, project deadline and the organisation’s readiness for the new operating model.
How do we know whether a smaller or larger current gateway is appropriate?
Use measured and forecast requirements. Record AP count, client count, traffic demand, tunnel roles, uplink speed, interface types, WAN functions, redundancy and growth. Then match those needs to a current supported family. Avoid buying only on the basis of the old model number because the new portfolio may divide roles differently from the previous generation.
What information is essential if the old gateway is completely dead?
Provide the model and serial, any configuration backup, switch-port configuration, cable and optic details, network diagram, Central or controller inventory record, software information from monitoring records, and the role of its redundant peer if one exists. A dead device does not remove the need to understand its dependencies; it makes external records more important.
Will authentication or ClearPass need changes?
Possibly. HPE’s AOS 8 to AOS 10 planning guidance notes that RADIUS source behaviour can differ by deployment mode and that some authentication-related functions change. If the gateway participates in 802.1X, captive access or role assignment, include ClearPass or external RADIUS validation in the migration plan and test user authentication before closing the change.
Can Central automatically replace an offline branch gateway?
HPE documents a Central workflow for replacing offline branch gateways. It evaluates whether the proposed replacement is a good match and can carry assignments such as site, group, licensing, configuration and firmware. That workflow is useful when the environment meets its conditions; it should not be assumed to apply to every old controller or migration scenario.
What should procurement include besides the gateway?
Potential items include subscriptions, power supplies, rack kit, optics, transceivers, cables, LTE or WAN accessories where relevant, professional services, staging and migration support. The exact list depends on the selected model and site design. Asking for a complete bill of material reduces last-minute gaps during the maintenance window.
Frequently asked questions
What is an HPE Aruba gateway replacement?
It is a planned change from an existing Aruba mobility controller or gateway to a suitable replacement device or target architecture. The scope can include hardware selection, Central and licensing review, configuration, staging, cutover and testing.
Is an Aruba Mobility Controller the same as a Gateway?
In HPE’s AOS 10 terminology, mobility controllers are referred to as Gateways because their role changes as management functions move to HPE Aruba Networking Central. Older AOS 8 environments may still use the controller terminology.
Can FourTeck recommend the replacement model?
Yes, after reviewing the current model, gateway role, AP and client scale, ports, software, management architecture, subscriptions, redundancy, growth plans and site constraints. The recommendation should be requirement based rather than a generic model substitution.
Do I need Aruba Central for a gateway replacement?
It depends on the target architecture. AOS 10 gateways and APs are managed through HPE Aruba Networking Central. A replacement that remains within another supported architecture may have different requirements.
Can an AOS 8 configuration be moved directly to AOS 10?
HPE guidance states that migration from controller-managed AOS 8 to AOS 10 introduces a new management architecture and that the required configuration must be recreated in Central. Migration should be planned and tested before production devices are upgraded.
What information is needed for a gateway replacement quote?
Provide the old model and part number, software version, quantity, AP models and count, site role, current management platform, licenses, interfaces, redundancy, installation location, desired timeline and required configuration or migration services.
Can a faulty branch gateway be replaced through Aruba Central?
HPE Central includes a device-replacement workflow for supported branch gateway scenarios. The replacement must satisfy compatibility and license checks, so the exact device and environment should be validated before relying on that process.
Does the quotation automatically include installation and configuration?
Not necessarily. Hardware supply, subscriptions, staging, installation, configuration, migration and support should be listed as separate or clearly defined scope items so both parties understand what is included.
Is HPE Aruba gateway availability guaranteed in Dubai?
No. Current availability depends on the exact model, regional part number, quantity, licenses, accessories and vendor lead time. Contact FourTeck to confirm UAE availability for the specific requirement.
Plan the replacement around your actual Aruba environment
Send FourTeck the current gateway model, software, site role, AP scale, management platform and replacement reason. We can help define the suitable current option, license requirements, accessories, migration scope and UAE quotation without assuming a one-size-fits-all swap.