Wireless backhaul and site connectivity
MikroTik 60 GHz Products in Dubai, UAE
A 60 GHz link can connect nearby buildings, operational zones or temporary sites without the time and disruption of trenching new fibre. MikroTik offers several products for this purpose, but the right result depends less on choosing the highest number and more on matching topology, distance, alignment, weather exposure, Ethernet capacity, management requirements and fallback design to the actual site.
Direct answer: what are MikroTik 60 GHz products?
They are directional wireless devices designed mainly for high-capacity links across clear, relatively short outdoor paths. Businesses use them to bridge offices, warehouses, campuses, events and temporary sites when installing new cable is impractical or slow. Some models are supplied as preconfigured point-to-point pairs, while others operate as individual client or sector units. A buyer should confirm the exact topology, path length, mounting height, expected traffic, fallback requirement, regional version and current lifecycle status before proceeding. A proper site review is important because 60 GHz performance depends strongly on alignment, unobstructed line of sight, rain conditions and the link budget of the selected model.
What the family does
MikroTik 60 GHz equipment carries Ethernet traffic over a focused wireless path. In a typical point-to-point design, one device is installed at each building and aligned toward the other. The result acts as a transparent bridge between the two wired networks, subject to configuration, performance and design limits.
For point-to-multipoint requirements, a sector device can serve multiple compatible client devices. This layout is useful when several operational zones need to connect back to one central location, but supported client counts, distances and compatibility must be verified for the exact products.
Who should consider it
The range can suit organisations that control both ends of a link and can obtain clear line of sight. Common buyers include facility operators, logistics teams, schools, hospitality groups, event organisers, construction companies, CCTV integrators, managed service providers and internet service providers.
It is less suitable where the path is obstructed, mounting locations are unstable, heavy rain margin is insufficient, a long unsupported distance is expected, or the network requires a guaranteed service level without an engineered backup path.
Business challenges a 60 GHz design may address
Connecting separate buildings
A warehouse, office annex, gatehouse or accommodation block may need access to the same network without a new underground cable route. A correctly engineered wireless bridge can provide an alternative path where civil work is costly, delayed or restricted.
Supporting temporary operations
Events, exhibitions, construction compounds and pop-up facilities may need fast deployment and later relocation. Portable mounting and careful planning can make a wireless connection more practical than permanent cabling.
Reducing congestion in lower bands
A directional 60 GHz path can move backhaul traffic away from crowded conventional Wi-Fi channels. This does not remove the need for spectrum planning, but it can separate building-to-building traffic from ordinary access-point use.
Extending surveillance networks
Remote camera clusters, entrances and perimeter areas may require high-capacity return paths. The design must account for actual camera bitrate, switching, power, environmental protection and a recovery plan if the wireless link is unavailable.
Main product groups to compare
The MikroTik 60 GHz portfolio has included several designs over time. Buyers should compare the current product pages and regional ordering information rather than assuming that every historical model remains available. The groups below explain the selection logic without combining specifications from different devices.
Preconfigured point-to-point kits
A kit contains two matched units intended to create one bridge. Products such as the Wireless Wire Cube Pro are positioned for buyers who want a coordinated pair and simplified initial setup. Confirm whether the selected kit includes backup radio capability, mounting hardware, power accessories and the correct regional variant.
Individual client units
Individual devices are useful when building a custom point-to-point pair, adding a compatible endpoint to a sector, or replacing a unit within a planned architecture. Compatibility should be checked by model, wireless standard, RouterOS support, antenna pattern and intended network mode.
Sector access devices
Sector products such as the CubeSA 60Pro ac are designed for several compatible remote devices within the supported coverage area. They suit hub-and-spoke layouts, but the number of clients, angular coverage, distance and total traffic demand need separate validation.
Legacy and replacement decisions
Earlier wAP, LHG and Wireless Wire models may still appear in installed networks or reseller listings. Product status must be confirmed because some models are discontinued. For expansions, the correct approach is to verify compatibility and compare the recommended current alternative rather than buying only by a familiar model name.
Product-fit matrix
| Buyer need | Product type to consider | Main selection factor |
|---|---|---|
| One building-to-building link | Preconfigured point-to-point pair or two compatible individual units | Distance, alignment, Ethernet capacity, fallback and mounting |
| Several remote nodes connecting to one site | Sector access device with compatible clients | Client count, sector angle, aggregate traffic and compatibility |
| Temporary event or construction network | Portable point-to-point or sector arrangement | Mount stability, fast alignment, power availability and relocation plan |
| Resilient operational backhaul | Model with suitable backup capability or an independent secondary path | Rain fade tolerance, failover behaviour and business impact |
| Expansion of an existing MikroTik 60 GHz network | Exact compatible current or replacement unit | Model status, protocol generation, RouterOS version and regional code |
Buyer information table
This is a family page, so the information below describes procurement and planning considerations rather than claiming one specification for every model.
| Topic | MikroTik 60 GHz wireless products |
|---|---|
| Main purpose | Directional high-capacity wireless bridging and selected point-to-multipoint applications |
| Typical environments | Business campuses, logistics sites, hospitality properties, events, construction projects, surveillance networks and service-provider deployments |
| Available product types | Preconfigured pairs, individual client units, sector devices and legacy installed models; exact current range requires confirmation |
| Management | RouterOS on applicable devices; functions and licence level vary by model |
| Primary dependencies | Clear line of sight, path distance, weather margin, precise alignment, stable mounting, power and compatible endpoint design |
| Installation support | Scope dependent; request site review, mounting, alignment, cabling, configuration and testing as separate quotation items where needed |
| Availability guidance | Contact FourTeck to confirm model status, quantity, region, lead time and current UAE options |
| Important note | Do not select a product using distance alone. Real suitability depends on the complete link design and operating environment. |
Compatibility and design dependencies
A 60 GHz product should not be treated as a general-purpose outdoor Wi-Fi access point. The band is intended for focused, high-capacity paths, and the signal experiences greater atmospheric and rain-related loss than lower-frequency links. The practical effect is that a link which works well at a conservative distance may become unstable if the path is extended without sufficient margin or if alignment changes after installation.
Compatibility also depends on the specific MikroTik generation and role. A sector access device and a client must support the required operating relationship. Two products that both mention 60 GHz are not automatically a supported pair. Confirm product codes, RouterOS requirements, wireless standard, licence level, regional limitations and any recommended software version before purchase.
The Ethernet side of the link is equally important. Check switch port speed, PoE standard and voltage, surge protection, grounding, cable category, outdoor cable rating and maximum copper run. Where the business relies on the connection, consider an independent backup path rather than assuming an integrated lower-band fallback will meet every continuity requirement.
A practical purchase and deployment journey
Define the traffic need
Document normal and peak traffic, application sensitivity, VLANs, camera streams, voice, internet access and future growth. Required usable throughput should guide the design.
Inspect the path
Confirm coordinates, distance, mounting height, line of sight, rooftop access, nearby obstructions, future construction, movement and safe maintenance access.
Choose topology and models
Select point-to-point or point-to-multipoint, then compare exact compatible models, standards, antenna patterns, Ethernet ports, fallback features and lifecycle status.
Build the bill of materials
Include radios, mounts, poles, brackets, outdoor cable, PoE, surge protection, grounding, enclosure items, switch ports, power backup and any spares.
Install and align
Use stable mounts, safe working practices and appropriate weatherproofing. Alignment should be measured and documented rather than judged only by a quick connectivity test.
Configure and validate
Apply addressing, bridge or routing design, VLANs, security controls, monitoring and backups. Test throughput, latency, failover behaviour and management access.
Capacity without trenching
The strongest business case for 60 GHz is often the ability to carry substantial network traffic across a gap without opening roads, car parks or landscaped areas. This can shorten project preparation where rights of way, landlord approval or civil work are difficult.
The comparison should still include total ownership cost. Radios need mounts, weatherproof cabling, power, surge protection, installation labour and ongoing inspection. Fibre may remain preferable for very high availability, long service life or paths that cannot maintain line of sight.
Focused spectrum use
Highly directional links can reduce the broad interference footprint associated with ordinary access-point coverage. This makes 60 GHz attractive for dense properties where lower bands already serve staff and guest devices.
Directional operation does not eliminate planning. Multiple nearby links still require thoughtful channel and orientation decisions. Installation teams should record endpoints, headings, frequencies, signal readings and RouterOS settings so later changes do not create avoidable conflicts.
Operational resilience
Some MikroTik 60 GHz models include a 5 GHz backup radio, which can help maintain connectivity when the primary path is affected. That feature is model dependent and should be tested under the intended configuration.
A backup radio is not automatically equivalent to a separate resilient circuit. Critical operations may need diverse routing, redundant switches, backup power, monitored failover and a documented restoration process. FourTeck can include these dependencies in the requirement review.
Suitable business environments
Warehouses and logistics yards
Bridge a main communications room to a remote warehouse, gatehouse, loading zone or camera network where new fibre installation is difficult. Vehicle movement and future storage structures must not enter the path.
Schools and campuses
Connect teaching blocks, administration buildings or temporary classrooms while keeping network segmentation consistent. The design should address student traffic, voice, CCTV, access control and central monitoring.
Hotels and managed properties
Extend connectivity to villas, recreation areas, service buildings or staff facilities. Appearance, landlord permission, mounting position, salt exposure and maintenance access may influence the product and installation method.
Construction and temporary sites
Provide connectivity between site offices, security posts and work zones without committing to permanent ducting. Mounts must remain stable as the site changes, and the link should be reviewed whenever cranes or structures move.
Events and pop-up operations
Create temporary backhaul for ticketing, production, administration or controlled Wi-Fi coverage. Setup time, safe mounting, power continuity and a tested fallback plan are central to event readiness.
Service-provider access
Use compatible client and sector units for selected subscriber or enterprise access designs. Capacity planning, client concentration, routing architecture, monitoring and regulatory requirements should be evaluated by the operator.
Operational and integration considerations
The wireless bridge is only one component of the end-to-end service. Each endpoint usually connects to a switch, router, firewall or local distribution network. Decide whether the wireless devices will operate as a transparent Layer 2 bridge or take part in a routed design. A simple bridge is convenient, but large broadcast domains and spanning-tree mistakes can create operational problems. A routed link may provide stronger fault isolation and clearer monitoring, although it requires addressing and routing decisions.
VLAN handling should be confirmed before deployment. Record which tagged and untagged networks must cross the link, how management traffic is separated and which device provides DHCP, routing and security enforcement. For CCTV, calculate the aggregate bitrate from all cameras instead of relying only on camera count. For voice or control systems, consider latency, jitter and failover interruption rather than throughput alone.
Monitoring should include link state, signal information, traffic utilisation, device temperature where available, Ethernet errors, uptime and backup-radio events. Configuration exports and system backups should be stored securely. Management access should be limited to authorised networks and current RouterOS maintenance procedures should be followed.
Outdoor installation requires attention to surge protection, grounding and cable entry. PoE injectors and power adapters should remain in suitable protected locations unless explicitly rated for the environment. Uninterruptible power should be sized for the radio and connected switching equipment if short power interruptions would disrupt operations.
Questions to resolve before ordering
What are the exact endpoints?
Provide site names, coordinates, rooftop or wall positions and estimated distance. Photographs from both ends help identify obstruction and mounting issues.
Is the path completely clear?
Trees, billboards, machinery, cranes and certain glass can block or weaken the signal. Future developments should be considered, not only current visibility.
How much traffic must cross?
List applications, peak bandwidth, camera streams, users and expected growth. Required usable throughput may differ from a headline wireless data rate.
What happens during link loss?
Identify operational impact and decide whether integrated fallback, a separate wireless path, cellular service or a wired circuit is required.
Who will install and maintain it?
Confirm safe access, mounting responsibility, cable routes, testing, documentation and future realignment or replacement procedures.
Is the model current and regional?
Verify the exact product code, lifecycle status, regulatory version, included accessories, RouterOS licence and compatibility with the intended peer.
Procurement checklist
✓ Exact model or product code
✓ Required quantity and spare strategy
✓ Point-to-point or sector topology
✓ Endpoint coordinates and path distance
✓ Clear-line-of-sight confirmation
✓ Throughput and application profile
✓ Backup and continuity expectation
✓ PoE voltage and switch compatibility
✓ Mounts, poles and brackets
✓ Outdoor cable, surge and grounding
✓ RouterOS and management design
✓ Installation, alignment and testing scope
✓ UAE regional and availability confirmation
✓ Warranty and support guidance
How FourTeck can assist
FourTeck can review the business purpose, path information and network requirements before a model is quoted. This helps distinguish between a paired kit, individual devices and a sector design. The review can also identify whether a different wireless band, fibre, leased connectivity or a hybrid approach is more appropriate.
For a more complete requirement, FourTeck can coordinate a bill of materials covering radios, mounting, PoE, outdoor cable, surge protection, switching and power backup. Installation and configuration can be discussed as separate scope items, including alignment, VLAN setup, bridge or routing configuration, monitoring and handover documentation.
Visit the FourTeck technology products section, review available networking and implementation services, or send the link requirement for quotation coordination.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the exact MikroTik 60 GHz model, regional code and quantity. Availability may depend on product lifecycle, distributor allocation, shipment schedules and vendor lead time. A historical model shown on an old quotation or online listing should not be assumed to be current; FourTeck can help compare a suitable replacement where required.
Delivery and project coordination can be discussed after the exact requirement is confirmed. Buyers in Dubai, Abu Dhabi, Sharjah and Ajman can provide site and scheduling information in one request so that hardware, installation and configuration responsibilities are clear. Mounting access, permits, health and safety requirements, cable routes and working-hour restrictions may affect a service quotation.
For procurement assistance, contact FourTeck UAE. Company background and broader solution information are available on the FourTeck company page.
GCC Availability
FourTeck can assist organisations planning MikroTik 60 GHz links across GCC markets by reviewing the intended topology, exact endpoint requirement, model choice, accessories, configuration scope and procurement details. A project may involve the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain or Oman, but the same product code and service arrangement should not be assumed to apply identically in every country. Regional versions, regulatory conditions, distributor channels, quantity, shipping arrangements and vendor lead times can affect the available option.
For an accurate regional quotation, share the destination country, link distance, quantity, required product type, expected deployment date and whether installation, remote configuration or onsite coordination is needed. Where a multi-country rollout is planned, standardise the design principles while confirming local power, mounting, licensing and regulatory details for each destination. FourTeck can help structure these requirements and coordinate quotation discussions, but product availability, delivery schedules, service visits and project scope remain country and requirement dependent.
For Kuwait-related planning, buyers can also review FourTeck Kuwait technology assistance.
Africa Availability
FourTeck can support organisations evaluating MikroTik 60 GHz products for selected projects in Africa, including enterprise campuses, logistics operations, education networks, hospitality sites, temporary facilities and service-provider deployments. The first step is to confirm whether a 60 GHz path is technically suitable for the climate, distance, line of sight and operational impact. In some locations, a shorter conservative path with a separate fallback may be more appropriate than pursuing the maximum possible distance.
Availability and fulfilment may depend on the destination, exact product model, quantity, regional code, power requirements, shipping method, vendor lead time and local project conditions. Buyers should provide the destination country, endpoint details, quantity, preferred deployment schedule, installation expectations and ongoing support needs. FourTeck can assist with product evaluation, accessories, configuration scope, renewal or software guidance where relevant, and regional procurement planning. Local inventory, customs outcomes, country-wide onsite coverage and fixed delivery dates should be confirmed separately rather than assumed.
Regional resources include FourTeck Africa, FourTeck Kenya and FourTeck Uganda.
Related products and services to consider
MikroTik switching
Managed switches at each endpoint may provide VLAN handling, PoE, uplink capacity and monitoring. Select port speed and power based on the exact radio and connected network.
Outdoor installation materials
Mounts, poles, outdoor Ethernet cable, surge protection, grounding and weatherproof entry materials are part of the link, not optional afterthoughts.
Backup connectivity
A separate 5 GHz bridge, fibre path, leased service or cellular router may be required when the business cannot tolerate an interruption.
Site survey and link planning
A structured review of endpoints, obstructions, distance, mounting and traffic helps determine whether 60 GHz is appropriate before equipment is ordered.
Configuration and monitoring
RouterOS setup, management access, VLANs, bridge or routing design, alerts, backups and documentation can be included in a defined service scope.
Firewall and network integration
The backhaul should connect into the wider network securely. Segmentation, routing, access policy and remote management should be reviewed with the overall architecture.
Why businesses contact FourTeck
The most useful assistance often happens before a purchase order is raised. FourTeck helps buyers convert a broad request such as “wireless link between two buildings” into a clearer requirement containing distance, topology, traffic, mounting, power, resilience and management details. This reduces the risk of comparing products that are not intended for the same role.
For MikroTik 60 GHz projects, FourTeck can help with model and lifecycle clarification, compatible endpoint selection, bill-of-material guidance, quotation coordination and installation planning. Where services are requested, the scope can distinguish site inspection, physical installation, cable work, alignment, RouterOS configuration, testing, documentation and post-deployment support.
This approach is intended to produce a practical, auditable buying decision rather than a generic product recommendation. Exact compatibility, availability, warranty guidance and delivery planning are confirmed against the final model, region and quotation.
Frequently asked questions
Are MikroTik 60 GHz products suitable for connecting two offices?
They can be suitable when the buildings have a clear, stable line of sight and the chosen model supports the required distance and traffic. The design should include mounting, weather margin, Ethernet integration and a recovery plan. A path review is recommended before ordering.
Should I buy a preconfigured kit or two individual units?
A preconfigured kit is convenient for one point-to-point bridge because the two units are intended to operate together. Individual units may be appropriate for custom pairs, sector clients, replacements or expansions. Confirm exact compatibility, product status and included accessories.
Does every MikroTik 60 GHz model include 5 GHz backup?
No. Backup capability is model dependent. Some Cube-based products include a 5 GHz radio for fallback, while other designs differ. Check the exact official specification and test how failover behaves in the planned configuration.
Can 60 GHz pass through walls or trees?
It should generally be planned as a clear-line-of-sight technology. Walls, foliage and many other objects can block the path, while some glazing can attenuate or prevent operation. Mount the units with an unobstructed view of each other.
How far can a MikroTik 60 GHz link work?
Distance varies significantly by model, counterpart, wireless standard, alignment and weather margin. Do not apply the distance of one model to the whole family. Share the exact path and compare it with the current official guidance for the selected pair.
Can one access point connect several remote units?
Selected sector products support point-to-multipoint operation with compatible client devices. The practical design depends on supported client count, sector coverage, distance, aggregate traffic and software compatibility. Confirm the exact combination before purchase.
Is RouterOS included?
MikroTik hardware normally ships with RouterOS and a model-specific licence, but licence level and capabilities vary. Confirm the selected product specification, software support and any configuration requirements in the final quotation.
What information is needed for a quote?
Provide endpoint locations, distance, photos, required topology, quantity, throughput, connected equipment, PoE availability, mounting details, target schedule and whether installation, configuration, testing or support should be included.
Are older wAP 60G products still current?
Some earlier models are discontinued even though they remain visible in documentation or reseller listings. Confirm the exact lifecycle status and recommended replacement, especially when expanding an installed network that must remain compatible.
Can FourTeck arrange installation and configuration?
Installation and configuration can be discussed as scope-dependent services. The quotation should define site access, mounting, cabling, alignment, RouterOS setup, testing, documentation and support responsibilities rather than assuming they are included with hardware.
Plan the link before selecting the model
Send FourTeck the endpoint details, distance, photos, traffic requirement, topology and installation scope. The team can help compare current MikroTik 60 GHz options, confirm availability and prepare a clearer UAE quotation.