Ubiquiti EdgeRouter X SFP ER-X-SFP in Dubai, UAE
The ER-X-SFP gives technically managed networks a small desktop router with five Gigabit RJ45 interfaces, a dedicated 1G SFP port and passive 24V PoE output capability. It is intended for buyers who value configurable routing, fibre uplink choice and practical port density in a compact footprint.
Before requesting a quotation
Share the WAN handoff, required SFP module, fibre type, connected passive-PoE devices, quantity, deployment location and configuration expectations.
Availability, pricing, accessories and project timing must be confirmed for the exact requirement.
Direct answer for business buyers
The Ubiquiti EdgeRouter X SFP ER-X-SFP is a compact wired EdgeMAX router primarily used to route traffic between internet, local networks, VLANs and selected fibre links. It is most relevant to small offices, wireless internet deployments, branch networks, technical home offices, surveillance cabinets and managed sites where an administrator is comfortable with EdgeOS. Buyers should confirm expected throughput under the intended feature set, passive-PoE compatibility, SFP module type, fibre standard, VPN requirements, power budget and support expectations before proceeding. It is not a wireless access point, not a plug-and-play replacement for every ISP router and not a universal PoE switch.
What the ER-X-SFP does
At its core, the ER-X-SFP is a configurable router that can separate and direct network traffic using Ethernet and SFP interfaces. Administrators can define WAN and LAN roles, create VLAN interfaces, apply firewall rules, configure network address translation, establish static or dynamic routes, and build selected VPN connections. The five RJ45 interfaces and one SFP interface can be assigned according to the design rather than being permanently fixed to a single purpose.
The SFP port is particularly useful where a project requires a 1 Gigabit optical uplink or a compatible SFP-based copper connection. The correct transceiver, wavelength, connector, fibre mode and remote equipment must be matched; an SFP slot alone does not guarantee compatibility with every module or provider service.
Who should consider it
The model is best suited to buyers who need deliberate network configuration rather than a consumer-style wireless router. Appropriate users may include small businesses with managed switching, branch offices with a dedicated access point, wireless service operators, building networks, remote telemetry sites, compact server rooms and organisations replacing an older EdgeRouter while retaining familiar administration practices.
It may be less suitable when the buyer needs integrated Wi-Fi, multi-gigabit routing, modern controller-led gateway management, high VPN throughput, advanced security inspection, dual hot-swappable power supplies or a large number of ports. Those requirements should lead to a comparison with newer or higher-capacity gateways.
Business challenges the router can help address
Limited cabinet space
A 142 × 75 × 23 mm enclosure can fit locations where a full-width rack appliance would be unnecessary. Wall mounting is supported, although cable bend radius, ventilation and service access still need planning.
Need for an optical uplink
Its 1G SFP interface offers a practical path to fibre backhaul when the project uses a supported transceiver and matching optical standard. This can reduce reliance on external media converters in suitable designs.
Powering selected edge devices
Five RJ45 ports support passive 24V PoE output, providing a potential way to power compatible Ubiquiti or other passive-PoE equipment. Voltage, pinout, wattage and device support must be confirmed first.
Network segmentation
EdgeOS can support routing and policy separation between users, services, cameras, management networks and guest access. The quality of the outcome depends on correct design, configuration and testing.
Core capabilities in practical terms
Assign Ethernet and SFP interfaces as WAN, LAN, routed or switched ports according to the design.
Use a browser-based interface for common tasks and command-line access for advanced configuration and troubleshooting.
Create VLANs, routes, NAT rules, firewall policies, DHCP services and selected VPN configurations.
The model is associated with Ubiquiti’s UISP and EdgeMAX environment rather than the UniFi gateway management experience.
Product-fit decision matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Fibre backhaul | A 1G SFP uplink is sufficient | SFP type, connector, wavelength, fibre mode and remote device |
| Passive PoE distribution | Connected equipment explicitly accepts 24V passive PoE | Pinout, per-port demand and total 50W budget |
| Small office routing | Gigabit interfaces and EdgeOS features meet the design | Internet speed, active features and future growth |
| VPN connectivity | The VPN type and expected traffic fit the platform | Protocol, encryption, number of tunnels and performance target |
| Managed remote site | A skilled administrator can maintain EdgeOS | Monitoring method, backup process, firmware policy and support ownership |
Verified technical information
| Brand | Ubiquiti |
|---|---|
| Product | EdgeRouter X SFP |
| Model | ER-X-SFP |
| Processor | Dual-core 880 MHz MIPS1004Kc |
| System memory | 256 MB DDR3 RAM |
| Code storage | 256 MB NAND |
| Network interfaces | Five Gigabit Ethernet RJ45 ports and one 1G SFP port |
| PoE output | Five 24V passive PoE, 2-pair outputs; pins 4,5 positive and 7,8 negative |
| Total PoE budget | 50W total, maximum 12W per port |
| Power method | 24V DC, 2.5A external AC/DC adapter included |
| Supported input voltage | 9–26V DC according to the current official technical page |
| Maximum device consumption | 5W excluding PoE output |
| Dimensions | 142 × 75 × 23 mm |
| Weight | 215 g |
| Mounting | Wall mount supported |
| Operating temperature | -10 to 45°C |
| Operating humidity | 10 to 90% non-condensing |
| Certifications | CE, FCC and IC listed by the manufacturer |
| Availability | Contact FourTeck for current UAE options, quantity and vendor lead time |
Important compatibility and dependency notice
The PoE ports use 24V passive output rather than standards-based 802.3af, 802.3at or 802.3bt negotiation. Passive power can damage equipment that does not accept the required voltage and pinout. Every powered device must therefore be checked by exact model. The SFP interface is 1 Gigabit, not SFP+, and should not be specified for 10 Gigabit links. Optical compatibility depends on the transceiver at each end, wavelength, fibre mode, connector type, link distance and provider handoff. Performance also depends on configuration: firewall rules, traffic shaping, VPN encryption and additional services can materially change usable throughput. FourTeck can review the proposed bill of materials, but the final design should be validated against current vendor documentation and the customer’s actual network.
Purchase and deployment journey
Define the connection
Document internet handoff, LAN subnets, VLANs, fibre details, required ports and any passive-PoE endpoints.
Confirm fit
Compare throughput, VPN load, management preference and future growth with the ER-X-SFP platform.
Build the quotation
Include the router, correct SFP module, patch leads, mounting needs, configuration work and any support scope.
Configure and test
Apply routing, VLAN, firewall, DHCP and VPN settings, then test fail cases, management access and backup recovery.
Document ownership
Record credentials, configuration backups, firmware version, port assignments, support contacts and change procedures.
Fibre uplink planning without unnecessary hardware
The SFP port is the most distinctive difference between the ER-X-SFP and compact routers that provide only copper Ethernet. In a building riser, wireless backhaul cabinet, campus edge, warehouse or remote equipment location, a fibre run can provide electrical isolation and longer reach than ordinary copper cabling. Using the router’s integrated SFP slot may remove the need for a separate media converter, its power supply and another failure point. That advantage applies only when the network design needs a 1G interface and the selected transceiver is supported.
Buyers should not treat “SFP” as a complete specification. A single-mode 1310 nm optic with an LC connector serves a different physical link from a multimode 850 nm optic. Bi-directional modules use paired wavelengths and must be matched correctly. Copper RJ45 SFP modules may impose temperature or power considerations. ISP fibre is often terminated at an optical network terminal rather than plugged directly into a customer router, so the service provider’s handoff must be confirmed. FourTeck can help translate the link requirement into the correct accessory request, but provider approval and end-to-end optical compatibility remain essential.
Passive PoE as a design tool, not a universal feature
The five RJ45 ports can deliver 24V passive PoE with a total available budget of 50W and a listed maximum of 12W per port. This is useful in installations built around compatible airMAX radios, selected legacy UniFi devices or other equipment designed for that exact passive-power method. It can simplify a small enclosure because fewer injectors and mains sockets may be required. It can also allow an administrator to control data and power from the same router location.
However, passive PoE does not perform the negotiation used by standards-based PoE. The administrator must know that the receiving device accepts 24V passive power on the stated pairs. A device labelled only “PoE” may require 48V 802.3af or another arrangement and therefore must not be connected to an enabled passive output without verification. The total power budget must include all connected devices, cable losses and operational conditions. Where mixed PoE standards exist, a separate managed PoE switch, suitable converter or injector may be safer and easier to document. The quotation should state which ports will deliver power and which equipment they are intended to serve.
EdgeOS control for administrators who need detailed routing
EdgeOS gives network administrators access to conventional routing and security functions through a graphical interface and command line. A deployment can include separate VLANs for staff, guests, cameras, voice, management or building systems, with firewall policies controlling permitted paths between them. DHCP scopes, DNS forwarding, NAT and static routes can be configured to fit a small business or remote-site design. Selected dynamic routing and VPN functions may also be available, depending on the software release and configuration.
This flexibility comes with an operational responsibility. The ER-X-SFP is most effective when someone owns its configuration, backups, upgrades and troubleshooting. A rushed setup that relies on broad firewall rules or undocumented changes can create security and availability risks. Administrators should restrict management access, use unique credentials, maintain an offline configuration backup and test upgrades before applying them to important sites. Organisations that prefer a modern, central controller workflow should compare this EdgeMAX approach with current UniFi or other managed gateway platforms. FourTeck can discuss configuration and migration scope so the management model is chosen deliberately rather than assumed.
Ideal environments and use cases
Small office gateway
Route an ISP Ethernet handoff to managed switches and access points while separating staff, guest and device networks. Confirm expected WAN speed and security feature load.
Wireless backhaul site
Use the SFP interface for a suitable fibre path and passive-PoE ports for verified radios. Environmental protection and surge planning may still be required.
Surveillance or building cabinet
Provide routing and segmentation at a compact edge location. Most modern cameras require standards-based PoE, so power compatibility must not be assumed.
Branch or remote equipment room
Support local VLANs, firewall rules and site connectivity where a small form factor is valuable and trained support is available.
Lab and technical workspace
Create isolated networks for testing, development or training while retaining access to a flexible CLI. Production-like controls should still be applied.
Legacy EdgeMAX continuity
Maintain a familiar EdgeOS operating model when replacing or standardising compatible sites, subject to lifecycle and firmware considerations.
Integration and operational considerations
The router should be treated as one component of the wider network. Confirm whether the upstream service presents Ethernet, tagged VLANs, PPPoE, static addressing or another requirement. On the LAN side, document which switches understand the planned VLANs and whether access points, phones, cameras or controllers need specific discovery and management paths. If the SFP port connects to a switch, both ends must agree on speed and optical characteristics. If the router provides DHCP, avoid overlapping scopes elsewhere. If another firewall remains upstream, decide which device performs NAT and policy enforcement to prevent double-NAT and troubleshooting confusion.
Operational planning should include configuration backup, logging, time synchronisation, monitoring, firmware review and replacement strategy. The current official Ubiquiti download history and product information should be checked during deployment because software support can change over a product’s lifecycle. The device has no integrated wireless radio, so Wi-Fi requires separate access points. It also does not provide an SFP+ 10G interface. Buyers expecting unified threat management, application inspection or subscription security services should select a dedicated security appliance rather than assuming these functions are part of a compact router.
Questions to resolve before ordering
State ISP speed, addressing, handoff type, VLAN tags and whether PPPoE or static routing is needed.
Identify the link distance, fibre type, connector, wavelength and remote interface rather than ordering an unspecified optic.
List exact model numbers and their voltage, pinout and wattage requirements. Do not rely on a generic PoE label.
Define staff, guest, voice, camera, server and management segments plus the permitted traffic between them.
Clarify remote users, site tunnels, protocols, encryption and realistic traffic volume.
Assign responsibility for credentials, upgrades, backups, monitoring and incident recovery.
Procurement checklist
☐ Exact model ER-X-SFP and required quantity
☐ Destination and preferred deployment schedule
☐ ISP handoff and expected internet bandwidth
☐ Copper port assignment and VLAN plan
☐ SFP module, connector, wavelength and fibre mode
☐ Exact passive-PoE device models
☐ Per-port and total power demand
☐ VPN protocol and traffic expectation
☐ Wall mounting, cabinet and cable requirements
☐ Configuration, testing and documentation scope
☐ Firmware, monitoring and backup ownership
☐ Warranty terms and current availability confirmation
How FourTeck can assist
FourTeck can help buyers turn a model request into a complete and supportable bill of materials. Assistance may include confirming whether the ER-X-SFP fits the proposed site, reviewing port requirements, identifying the intended SFP link, checking passive-PoE dependencies, discussing alternative gateways, coordinating a quotation and defining installation or configuration services. Where a project includes multiple sites, FourTeck can also help standardise the information required for each location so that differences in WAN service, fibre, local switching and power are visible before procurement.
Configuration support can be scoped around WAN setup, VLANs, firewall rules, DHCP, routing, VPN connectivity, management hardening, testing and documentation. The exact tasks, remote access method, customer responsibilities and handover expectations should appear in the quotation. For broader infrastructure needs, visit the FourTeck technology products page, review available network and security services, or discuss a mixed-vendor requirement through the FourTeck contact team.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the Ubiquiti EdgeRouter X SFP ER-X-SFP. Supply conditions may depend on quantity, regional model, distributor availability, vendor lead time and the accessories included in the request. A router-only quotation may not cover the SFP transceiver, fibre patch lead, rack shelf, surge protection, additional switch, access point, configuration work or onsite installation needed for the complete deployment. Buyers should therefore share the intended network design rather than requesting only a unit price.
Delivery and project coordination can be discussed after the exact requirement is confirmed. FourTeck can support requirement review for organisations in Dubai and coordinate suitable projects across Abu Dhabi, Sharjah and Ajman in one combined UAE scope. Installation and configuration services are variable and should be included explicitly in the quotation. Warranty handling, replacement terms and support arrangements should also be confirmed at the time of purchase because they can vary by supply route and current vendor policy.
GCC availability
Businesses planning ER-X-SFP deployments elsewhere in the Gulf can ask FourTeck for regional requirement review and quotation coordination. The process can cover the exact router model, compatible SFP accessories, passive-PoE endpoints, configuration scope, delivery planning and any installation or remote-support expectations. Projects may involve the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain or Oman, but availability and fulfilment conditions are not identical across these markets. Product supply, licensing where relevant, freight arrangements, service visits, lead times and local project requirements can vary by country, quantity and destination. To obtain useful guidance, provide the destination country, number of units, expected deployment date, fibre specification, connected equipment and whether configuration or documentation is required. For requirements involving Kuwait, buyers may also review FourTeck Kuwait technology coordination. No local stock, customs outcome or fixed delivery date should be assumed until the complete request has been reviewed.
Africa availability
FourTeck can assist organisations evaluating the ER-X-SFP for selected African network projects, including branch connectivity, wireless backhaul, compact routing and managed edge deployments. Regional procurement planning should consider the destination, required quantity, power environment, correct SFP optics, fibre standards, passive-PoE compatibility, shipping arrangements and the availability of skilled configuration support. Requirements in East Africa may be coordinated through resources such as FourTeck Kenya and FourTeck Uganda, while wider enquiries can begin through the FourTeck Africa technology portal. Availability, delivery schedules, customs processes, local standards, installation scope and vendor lead time vary by destination and cannot be guaranteed without review. Buyers should share the destination country, site environment, exact requirement, deployment schedule and support expectations so the proposed equipment and services can be assessed realistically.
Related options and complementary services
Ubiquiti EdgeRouter X
Consider the non-SFP compact model where a fibre slot and five passive-PoE outputs are not required. Port and power differences must be compared carefully.
Higher-capacity EdgeRouter models
Evaluate larger EdgeMAX routers when more ports, stronger routing performance or rack mounting are needed. Confirm current portfolio and lifecycle status.
Modern managed gateways
Compare current UniFi or security gateway platforms when central application management, integrated reporting or newer hardware is a priority.
SFP modules and fibre accessories
Select optics, couplers and patch leads only after confirming wavelength, connector, fibre type, distance and remote equipment.
Network configuration service
Scope VLANs, firewall rules, DHCP, routing, VPN, testing and documentation for a managed deployment rather than an unconfigured hardware handover.
Firewall and secure access review
Use a dedicated firewall assessment where the project needs threat inspection, subscription security, compliance reporting or advanced remote access.
Why businesses contact FourTeck
Business buyers often need more than a catalogue specification. FourTeck can help clarify whether the requested model matches the connection type, expected capacity and operational model; identify missing accessories; review compatibility questions; coordinate a commercial quotation; and define optional configuration, installation or migration assistance. This reduces the risk of ordering a router without the correct optic, connecting an incompatible PoE device, or discovering after delivery that another platform would better suit the required management workflow.
The aim is not to claim that one product fits every environment. It is to establish the requirement, present dependencies and help the buyer make an informed decision. Learn more about FourTeck’s business technology approach or contact the team with your current network diagram and required outcome.
Frequently asked questions
Is the ER-X-SFP a wireless router?
No. It is a wired router with five Gigabit RJ45 ports and one 1G SFP port. Separate wireless access points are required for Wi-Fi coverage.
Can every RJ45 port power a PoE device?
The five RJ45 ports support 24V passive PoE output, but only compatible devices should be connected. Standards-based 802.3af, 802.3at or 802.3bt equipment must not be assumed compatible.
Does the SFP port support 10 Gigabit?
No. The official specification lists a 1G SFP port. Projects requiring 10G SFP+ connectivity need a different router or switch platform.
Is an SFP transceiver included?
An SFP module should not be assumed included. Confirm the quotation and select the transceiver according to fibre type, wavelength, connector, distance and remote equipment.
What power adapter is supplied?
The manufacturer lists an included external 24V DC, 2.5A power adapter. Regional plug type and quotation contents should still be confirmed.
Can the router handle a Gigabit internet connection?
Its interfaces are Gigabit, but real routing performance depends on configuration, packet size, firewall policies, VPN encryption, traffic shaping and enabled services. The workload should be reviewed before purchase.
Does it require a subscription license?
Core EdgeOS routing operation is not generally presented as subscription-dependent, but buyers should verify current software, support and management requirements at the time of deployment.
Can FourTeck configure VLANs and firewall rules?
Configuration assistance can be included as a separate scope covering agreed WAN, VLAN, DHCP, routing, firewall, VPN, testing and documentation tasks.
How do I confirm UAE availability?
Send FourTeck the exact model, quantity, destination, required accessories and expected timeline. Current availability and lead time will be confirmed against the complete request.
What information is needed for an accurate quote?
Provide quantity, ISP handoff, WAN speed, SFP requirements, fibre details, passive-PoE devices, VLANs, VPN needs, installation location and desired configuration or support services.
Confirm whether the ER-X-SFP fits your network
Share your WAN handoff, fibre requirement, PoE endpoints, quantity and configuration needs. FourTeck can coordinate model review, accessories, quotation and UAE project support.
