UniFi Protect camera planning for business sites
Ubiquiti G5 Camera Series in Dubai, UAE
Choose the right G5 form factor for each viewing zone, then align the cameras with PoE capacity, UniFi Protect recording resources, storage retention, mounting conditions and operational expectations.
Planning a camera rollout?
Share the site type, camera count, required coverage, recording period and installation scope for a model and system review.
Direct answer: what is the Ubiquiti G5 Camera Series?
The Ubiquiti G5 Camera Series is a group of wired UniFi Protect surveillance cameras covering several physical designs and viewing needs. It is mainly used to capture and centrally manage business security video through a compatible UniFi Protect deployment. Organisations should consider the range when they value integrated camera management, PoE cabling, event review and a consistent interface across multiple camera locations. Before proceeding, confirm the exact models, camera count, indoor or outdoor exposure, night-time distances, required field of view, audio needs, mounting surfaces, PoE power budget, recorder capacity, storage retention and software compatibility. A family-level quotation should always identify each model and accessory separately rather than treating “G5” as a single camera specification.
What the range does
G5 cameras provide network-based video capture for UniFi Protect environments. Different models address different placement problems: a bullet shape can provide a visibly directed view, a dome can suit low-profile ceiling coverage, a turret can offer flexible aiming with strong weather protection, a compact camera can fit constrained locations, a Pro model can support higher-detail 4K viewing with optical zoom, and a PTZ model can provide remotely controlled movement where an operator needs to inspect a wider area.
The practical value is not simply the camera image. A successful deployment connects cameras to the correct PoE switching, adopts them into a compatible Protect host, assigns recording and detection zones, sets retention expectations, and gives authorised users a defined process for live view, playback, export and incident response.
Who should consider it
The series may suit offices, clinics, schools, retail shops, warehouses, workshops, hotels, restaurants, apartment common areas and managed compounds that are planning a UniFi Protect system or expanding an existing one. It can also appeal to IT teams that prefer a unified operational view rather than separate interfaces for networking and video security.
It is less suitable when a project specification mandates a different VMS, requires a particular open integration that has not been confirmed, needs specialist thermal or certified hazardous-area cameras, or expects every camera to work without a compatible recording platform. Buyers should validate regulatory, privacy, retention and evidential requirements independently for their operating environment.
Business challenges and the camera response
Blind spots at varied distances
The range offers different fields of view, infrared distances and, on selected models, optical zoom or PTZ movement. The solution is a location-by-location camera schedule, not one model everywhere.
Unclear recording capacity
Camera resolution, frame settings and retention objectives influence storage and console load. Protect capacity should be checked before the quantity is finalised.
Difficult cable and power planning
PoE simplifies endpoint power, but the switch power budget, cable route, surge protection and distance limitations still require engineering attention.
Too many alerts
Detection and motion zones can be tuned to important areas. Effective settings depend on camera angle, scene movement, lighting and operational response rules.
Model-selection map
| Buyer need | G5 type to consider | Main selection factor |
|---|---|---|
| General indoor or outdoor perimeter view | G5 Bullet | Viewing angle, 2K detail, mounting direction and night distance |
| Higher-detail target area with zoom | G5 Pro | 4K requirement, optical zoom, IR distance and accessory compatibility |
| Discreet ceiling coverage with audio | G5 Dome | Ceiling position, vandal exposure, two-way audio need and viewing geometry |
| Compact low-profile indoor placement | G5 Dome Ultra | Indoor location, compactness, mounting method and night range |
| Weatherproof wide-angle turret coverage | G5 Turret Ultra | Outdoor rating, wide field of view, 30 m-class IR and tamper considerations |
| Small footprint with flexible mounting | G5 Flex | Shorter night range, mount options and protected installation conditions |
| Operator-controlled inspection of a broad zone | G5 PTZ | PoE+ capacity, movement coverage, mounting structure and active monitoring workflow |
This matrix is a planning guide rather than a substitute for a site survey. Camera names can remain in the market while software requirements, revisions, bundles and accessories change. The exact bill of materials should identify model codes, colour, mount, junction box, surge protection, cable, PoE switch, recording host and storage.
Family information table
| Brand | Ubiquiti |
|---|---|
| Product family | UniFi Protect G5 camera range |
| Camera formats | Bullet, dome, compact dome, turret, compact/flex, professional zoom and PTZ options; exact current range is region dependent |
| Typical resolution range | Model dependent, including 2K-class models and a 4K G5 Pro |
| Power method | PoE; selected higher-power models may require PoE+. Confirm per model. |
| Management | Compatible UniFi Protect application and console/NVR required |
| Smart detections | People, vehicle and animal detections are supported on current G5 models where specified; features can depend on software and platform |
| Night vision | Built-in infrared capability varies materially by model, from short-range compact coverage to longer-range Pro and turret options |
| Audio | Model dependent; microphone or two-way audio should be confirmed for each placement and local policy |
| Outdoor suitability | Model dependent. Confirm ingress rating, mounting method, cable entry and environmental exposure. |
| Recording capacity | Depends on Protect host, total camera mix, resolution, settings, storage and retention objective |
| Licensing | Confirm current UniFi Protect platform policy, optional AI enhancement requirements and region-specific terms |
| Included components | Model and package dependent; standard mounts are commonly included, while special mounts and junction boxes may be optional |
| Warranty guidance | Confirm supplier terms, serial eligibility and regional warranty conditions in the quotation |
| UAE availability | Contact FourTeck for current model, quantity and lead-time confirmation |
Compatibility and dependency notice
A camera is only one part of the system. Confirm that the selected UniFi console or network video recorder supports the intended number and mix of cameras. Higher-resolution streams can consume more recording resources than lower-resolution streams, and the practical camera limit depends on the host and configuration. Storage retention also changes with recording mode, bitrate, resolution, activity and disk capacity.
The network must provide suitable Ethernet cabling and enough PoE or PoE+ budget. Outdoor routes may require appropriate surge protection, weatherproof cable entry and grounding design. Software versions should be kept compatible with the selected cameras and operational policy. Optional AI features, enhanced recognition, accessories or integrations can have separate platform, hardware or software dependencies. FourTeck can help review these dependencies, but the final design should be approved against the actual site and current vendor documentation.
A practical purchase and deployment journey
Map the scenes
Identify entrances, cash areas, corridors, loading bays, parking zones, perimeters and critical assets. Define what must be observed, recognised or reviewed.
Select camera types
Match form factor, field of view, detail, IR range, weather rating, audio, zoom and mounting method to each scene.
Size the platform
Check Protect console capacity, recording storage, retention, PoE budget, uplinks, UPS support and user access requirements.
Confirm installation scope
Document cable routes, heights, mounts, junction boxes, access equipment, outdoor protection, labelling and testing responsibilities.
Configure and validate
Adopt devices, update software, set views, zones, recording, alerts, roles and exports, then validate day and night images.
Handover operations
Provide camera naming, as-built records, access ownership, retention notes, incident procedures and maintenance guidance.
Capability focus: selecting useful image detail
Resolution is important, but it does not automatically guarantee usable identification. A 4K camera such as the G5 Pro can provide more pixels than a 2K model, yet its value depends on lens position, zoom setting, target distance, lighting, motion, compression and viewing angle. A wide scene can spread available pixels across a large area, while a narrower view can place more detail on the subject. This is why a doorway, licence-check point, warehouse aisle and open parking area may each need a different camera plan.
For general awareness, a wide-angle turret or compact model may be appropriate. For a specific gate, loading bay or distant target, the G5 Pro’s optical zoom and longer infrared capability may be more relevant. PTZ can help an operator inspect a broad zone, but it should not be assumed to record every direction at once. Where continuous evidence is required in several directions, fixed cameras may still be needed alongside PTZ coverage.
Night performance deserves its own test. Infrared distance figures describe illumination reach under particular conditions, not guaranteed subject identification at that distance. Reflective walls, rain, dust, glass, nearby objects and incorrect angle can degrade the result. Camera placement should avoid direct IR reflection and should be validated after dark. Additional lighting, repositioning or a different model may be more effective than increasing digital zoom after an incident.
FourTeck can help translate operational statements such as “see who enters the store” or “review activity around the loading dock” into a camera schedule. The quotation can distinguish general overview views from higher-detail target views, preventing an expensive design that still fails to capture the required information.
Capability focus: central management and event review
The G5 family is designed around UniFi Protect management. For a business buyer, centralisation can simplify live viewing, camera status checks, recorded playback and user access. The value is strongest when camera naming, site structure and permissions are designed deliberately. A system with cameras called “Camera 1” through “Camera 40” is difficult to operate during an incident. Names such as “Warehouse North Door” or “Reception Visitor Entry” are more useful, and a site map or camera register should match them.
Detection zones can help focus alerts on meaningful areas, while privacy zones may be needed to avoid recording irrelevant or sensitive spaces. Alert logic should reflect the operating model. A security desk monitoring continuously may use different notifications from a small office where managers only review incidents. Too many alerts can lead users to ignore them, so deployment should include tuning rather than simply enabling every notification.
Access permissions also require planning. Administrators, security operators, managers and investigators may need different capabilities. Export permissions and retention rules should align with internal policy and applicable regulations. Remote access should use properly managed accounts and strong authentication. Where the organisation has multiple branches, naming and permissions should be standardised so operators can navigate quickly without receiving unnecessary access to every location.
Platform features and supported integrations can evolve. Buyers should confirm the current Protect software version, console capabilities and any optional enhancement devices before relying on a specific workflow. FourTeck can include adoption, role setup, zone configuration, recording policy assistance and handover documentation in the project scope where required.
Capability focus: resilient PoE infrastructure
PoE allows each G5 camera to receive power and network connectivity through Ethernet, reducing the need for a separate electrical outlet at the camera. This can make installation cleaner, but it does not remove the need for power engineering. Every PoE switch has a total power budget and each port has a supported power class. A G5 PTZ or a camera with a powered accessory can require more power than a basic fixed camera. The design should add the maximum expected load and preserve reasonable headroom.
Cable quality and route matter. Copper Ethernet runs should follow recognised distance limits and installation practices. Outdoor or exposed routes may require UV-resistant materials, conduit, suitable junction boxes and surge protection. Cable entry should not create a water path into a camera or wall. Camera mounts must be fixed to a structure that can support the device and resist vibration. High placements need an installation and maintenance access plan rather than relying on improvised access later.
Recording continuity depends on more than the camera. The PoE switch, recorder, storage and network uplinks should be considered for UPS support. A power failure can stop all cameras connected to one switch, so critical sites may need segmented power, redundant network paths or operational procedures. High availability expectations should be stated before quotation because they can materially change the architecture and cost.
The network should also separate surveillance traffic appropriately and provide secure administrative access. VLAN design, uplink capacity and firewall policy can be reviewed as part of a broader infrastructure project. Visit the FourTeck technology services page to discuss installation, configuration and supporting network requirements.
Suitable business environments
Retail and hospitality
Entrances, point-of-sale surroundings, corridors, stock rooms, service doors and customer areas can use different fixed views. Privacy, audio policy and retention should be reviewed carefully.
Warehouses and logistics
Wide aisles, loading docks, gates and yards often require mixed camera types, longer night reach, protected cable routes and clear coverage of handover points.
Offices and clinics
Low-profile dome or compact designs may fit receptions, corridors and controlled access points. Camera placement should avoid private consultation or work areas unless justified.
Residential common areas
Lobbies, parking entrances, lifts, corridors and perimeter zones can be planned with resident privacy, vandal exposure and building management responsibilities in mind.
Education and training sites
Perimeters, reception points and shared circulation spaces can be monitored subject to safeguarding, privacy and retention policies defined by the organisation.
Multi-branch organisations
A common Protect operating model can improve consistency across branches, but each site still needs local power, storage, bandwidth, user access and support planning.
Integration and operational considerations
A surveillance system touches physical security, IT, facilities, legal and management responsibilities. The camera team should know who owns the network, who can approve mounting locations, who defines retention, and who responds to alerts. Where the site is leased, landlord approval may be required for external mounting, drilling or cable routes. Building management rules can affect access times and working methods.
Network integration should cover IP addressing, VLANs, switch ports, DNS and time synchronisation, remote access and update policy. The system should not depend on undocumented passwords or personal accounts. Administrative ownership must be transferred to the organisation, and recovery information should be stored securely. Changes should be recorded so future support teams understand the design.
Operational integration means deciding what happens when a detection or incident occurs. Who reviews the event? How quickly? Who can export video? How are exports stored and shared? How long is footage retained? What is the process when a camera is offline? These questions are more important than adding cameras without a response plan.
For environments with existing cameras or a different video management platform, compatibility must be examined before migration. Third-party camera support does not necessarily provide the same features as native Protect cameras, and a staged migration may be preferable. FourTeck can review the existing estate and define a practical transition scope without assuming that every installed device will provide full feature parity.
Questions to resolve before ordering
What must be visible?
State whether each camera is for general awareness, recognition, transaction review, access verification, perimeter activity or another defined purpose.
How far is the subject?
Measure target distance and scene width. This influences field of view, resolution, optical zoom and infrared requirements.
What happens at night?
Describe ambient lighting, reflective surfaces, vehicle headlights, glass and the required night-time result.
Where will it mount?
Confirm surface type, height, weather exposure, vandal risk, cable entry, access equipment and optional mount needs.
How long should footage remain?
Retention targets and recording mode are needed to size the recorder and storage appropriately.
Who will operate it?
Define administrators, viewers, investigators, alert recipients, export rights and support contacts.
Procurement checklist
☐ Exact G5 model and model code for every location
☐ Required quantity and preferred colour where available
☐ Camera purpose, target distance and scene width
☐ Indoor, sheltered or fully outdoor exposure
☐ Night-vision distance and ambient lighting conditions
☐ Audio recording or two-way audio requirement
☐ Standard, arm, pole, flush, pendant or junction-box mounting
☐ PoE or PoE+ switch ports and total power budget
☐ UniFi Protect console or NVR model and camera capacity
☐ Storage size, recording mode and retention expectation
☐ Cable routes, surge protection, conduit and access equipment
☐ Installation, configuration, testing and documentation scope
☐ User roles, remote access, alerts and export process
☐ Warranty, regional availability and lead-time confirmation
How FourTeck can assist
Requirement clarification
Convert business concerns into camera locations, coverage goals and measurable project assumptions.
Model selection
Compare G5 camera formats without blending specifications or treating optional features as standard.
System sizing
Review Protect host capacity, storage retention, PoE switching and supporting network requirements.
Project scope
Define installation, configuration, testing, documentation, migration and handover responsibilities.
FourTeck can prepare a quotation after the exact requirement is known. The quotation may cover cameras, mounts, accessories, UniFi Protect hosts, storage, PoE switching, cabling and implementation services as required. Product supply and service scope are not automatically bundled; they should be stated clearly. For wider technology options, browse the FourTeck product catalogue, learn more about FourTeck, or send the project details through the business technology contact page.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the exact Ubiquiti G5 camera models, quantities, colours and accessories required. Availability can differ by model revision, vendor lead time, regional channel, package type and order quantity. A family name alone is not sufficient for procurement because a G5 Bullet, G5 Pro, G5 Dome, G5 Turret Ultra, G5 Flex and G5 PTZ serve different viewing and power requirements.
Delivery and project coordination can be discussed after the bill of materials and destination are confirmed. Installation and configuration should be listed in the quotation when required. Buyers should also confirm warranty handling, return conditions, serial eligibility and any region-specific software or support considerations before purchase. FourTeck can coordinate requirement review for businesses in Dubai, Abu Dhabi, Sharjah and Ajman through one combined project discussion, avoiding duplicated city-by-city planning.
For a clearer quotation, share the site address, number of cameras, preferred models if known, floor plans or marked photographs, mounting heights, recording retention, existing network equipment and expected project schedule. This information helps identify dependencies before products are ordered.
GCC Availability
FourTeck can assist organisations planning Ubiquiti G5 camera deployments across GCC markets with requirement review, model selection, quotation coordination, recorder and storage sizing, configuration scope, installation planning and renewal or support guidance where applicable. Projects in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman can differ in destination requirements, electrical and cabling practices, site access, logistics and local project conditions. Product availability, software policy, accessory supply, delivery schedules, service visits and vendor lead times can vary by country, model and quantity. Buyers should provide the destination country, exact G5 models or coverage objectives, required quantity, deployment location, existing UniFi Protect platform, retention target and expected timeline. FourTeck will then help define an appropriate bill of materials and coordination approach. No assumption should be made about local inventory, fixed delivery time, customs outcome or onsite availability until the specific requirement has been reviewed.
Africa Availability
Organisations planning surveillance projects in Africa can contact FourTeck for guidance on G5 camera selection, UniFi Protect host sizing, storage, PoE switching, accessories, configuration, support expectations and regional procurement planning. Requirements in East Africa, West Africa, Southern Africa and Central Africa may differ because of destination logistics, power conditions, environmental exposure, shipping arrangements, regulatory considerations and local installation resources. Kenya and Uganda enquiries can also be coordinated through relevant FourTeck regional channels, while broader projects can be discussed through FourTeck Africa. Availability and fulfilment depend on the exact camera model, quantity, destination, power and mounting requirements, vendor lead time and project scope. Buyers should share the destination country, site type, required coverage, preferred schedule and any installation or support expectations. FourTeck can then provide practical guidance without assuming immediate shipment, guaranteed customs clearance or country-wide onsite service.
Related options and services
UniFi Protect console or NVR
Select recording hardware according to the total camera mix, performance guidance, storage plan and growth expectation.
PoE switching
Provide the correct port count, PoE standard, power budget, uplink capacity and management features for the camera network.
Camera mounts and protection
Review arm mounts, junction boxes, pole hardware, flush mounts, conduit adapters and outdoor surge protection per location.
Installation and configuration
Include cable installation, mounting, device adoption, naming, recording, zones, alerts, permissions, testing and handover.
Network and firewall review
Align VLANs, switch uplinks, remote access, administrative security and site connectivity with the surveillance design.
Migration assessment
Evaluate existing cameras, cabling, power, retention and operational processes before replacing or integrating systems.
Frequently asked questions
Is every Ubiquiti G5 camera the same?
No. G5 is a family designation covering multiple form factors and specifications. Resolution, field of view, infrared distance, weather protection, audio, zoom, mounting and PoE requirements vary by model.
Which G5 camera is suitable for outdoor use?
Several models are designed for outdoor use, including bullet, Pro and turret options, but the exact ingress rating, operating environment, cable entry and mounting method must be confirmed. Sheltered and fully exposed locations should not be treated as identical.
Do G5 cameras require a UniFi Protect recorder?
A compatible UniFi console or NVR running UniFi Protect is generally required for native management and recording. The correct host depends on camera quantity, resolution mix and retention needs.
Can one PoE switch power all cameras?
Possibly, but only when the switch has enough compatible PoE ports, total power budget and uplink capacity. Add each camera’s maximum consumption and consider PoE+ requirements for higher-power models.
How much recording storage is needed?
Storage depends on camera count, resolution, frame and quality settings, recording mode, scene activity and retention period. FourTeck can estimate capacity after these inputs are provided.
Does the G5 range support smart detections?
Current G5 models commonly support detections such as people, vehicles and animals where specified. Exact features can depend on the camera, Protect version and optional enhancement hardware.
Is the G5 Pro always the right choice because it is 4K?
Not necessarily. It is valuable where higher detail, optical zoom or longer night coverage is needed. A lower-cost 2K model may be more appropriate for general awareness or wide, short-distance coverage.
Can FourTeck install and configure the cameras?
Installation and configuration can be discussed as part of the project. The quotation should state cabling, mounting, access equipment, adoption, recording setup, alert tuning, user roles, testing and documentation separately.
What information is needed for a quotation?
Provide the site location, camera count, coverage objectives, target distances, indoor or outdoor conditions, night requirements, mounting heights, existing Protect equipment, retention period and required installation scope.
Are Ubiquiti G5 cameras currently available in Dubai?
Availability varies by model, colour, quantity and vendor lead time. Contact FourTeck to confirm the exact model codes and current UAE supply options before placing an order.
Build the camera schedule before buying the cameras
Send FourTeck the site layout, coverage priorities, camera quantity, recording target and installation expectations. We will help organise the G5 model mix, Protect platform, storage, PoE and accessories into a clearer quotation.