Multi-gigabit UniFi switching for demanding access networks
Ubiquiti Pro HD Switch Series in Dubai, UAE
Plan a higher-capacity wired network with 2.5 GbE access, 10 GbE copper and fibre uplinks, Layer 3 features and a choice between powered and non-powered edge connectivity.
Need help selecting the model?
Share your endpoint count, PoE load, uplink plan, rack environment and deployment location for a requirement-based recommendation.
PoE and non-PoE 24-port options
2.5 GbE and 10 GbE copper
Four 10G SFP+ interfaces
UniFi Network platform
Direct answer for buyers
The Ubiquiti Pro HD Switch Series is a professional 24-port UniFi switching range for networks that need more than standard Gigabit access. It is mainly used to connect high-throughput workstations, Wi-Fi access points, cameras, servers, storage devices and aggregation links while keeping administration inside the UniFi Network interface. Organisations considering this family should first decide whether endpoint power is required, because the USW-Pro-HD-24-PoE supplies PoE while the USW-Pro-HD-24 does not. Buyers should also confirm rack depth, optical modules, cabling category, expected traffic, redundancy needs and software compatibility before ordering.
What the series does
The Pro HD family provides a high-density access and distribution layer for organisations moving from 1 GbE to multi-gigabit networking. Its port mix helps a single rack unit serve conventional Ethernet devices, newer 2.5 GbE endpoints, selected 10 GbE copper systems and fibre-based uplinks. The platform also supports switching, VLAN segmentation, link aggregation, traffic controls and local Layer 3 functions that can simplify routing between local networks in suitable UniFi designs.
The practical value is not simply a faster port count. A correctly designed switch must align endpoint speeds, uplink capacity, power requirements, cable quality, network segmentation and operational support. The Pro HD models are most useful where these factors have been assessed together rather than purchased in isolation.
Who it suits
The series can suit medium and larger offices, hotels, schools, training centres, healthcare sites, media environments, retail operations, surveillance networks, technology companies and multi-site organisations standardising on UniFi. It is particularly relevant when several endpoints need 2.5 GbE, when Wi-Fi infrastructure requires higher-speed wired backhaul, or when a compact 1U switch must provide multiple 10 GbE uplink choices.
It may be excessive for a small office that only needs a few Gigabit ports, and the non-PoE model is not appropriate where the switch must directly power access points, cameras or phones. A smaller or lower-cost UniFi model may be a better fit when multi-gigabit density, PoE capacity or Layer 3 functions are not required.
Business challenges this family can address
Gigabit bottlenecks
Twenty-two 2.5 GbE access ports allow compatible endpoints to exceed standard Gigabit throughput without moving every connection to 10 GbE.
Limited uplink choice
Two 10 GbE RJ45 ports and four 10G SFP+ ports support flexible copper or fibre connections to gateways, servers and aggregation layers.
High powered-device demand
The PoE version offers PoE++ capability across all twenty-four copper ports, subject to per-port and shared power limits.
Fragmented administration
UniFi Network provides a common interface for configuration, monitoring, topology visibility and policy management across compatible UniFi devices.
Model-fit matrix
| Requirement | Suitable choice | Confirm before ordering |
|---|---|---|
| Multi-gigabit access without endpoint power | USW-Pro-HD-24 | External power arrangements for connected devices |
| Powering access points, cameras or phones | USW-Pro-HD-24-PoE | Total wattage, per-port class and surge design |
| Copper 10 GbE endpoints | Either model | Cable category, run length and endpoint negotiation |
| Fibre uplinks or rack interconnects | Either model | SFP+ optic or DAC compatibility and distance |
| Power-backup integration | Either model with supported DC backup design | Compatible backup hardware and complete power architecture |
Verified family information
| Brand | Ubiquiti |
|---|---|
| Family models | USW-Pro-HD-24 and USW-Pro-HD-24-PoE |
| Form factor | 1U rack mount |
| Copper access ports | 22 × 2.5 GbE RJ45 plus 2 × 10 GbE RJ45 |
| Fibre interfaces | 4 × 10G SFP+ |
| Switching capacity | 230 Gbps |
| Non-blocking throughput | 115 Gbps |
| Forwarding rate | Approximately 171 Mpps |
| Layer 3 | Supported, including local inter-VLAN routing, static routing, DHCP server and relay functions |
| PoE on USW-Pro-HD-24 | Not included |
| PoE on USW-Pro-HD-24-PoE | 24 PoE++ ports, up to 64 W per port subject to limits, 600 W total PoE availability |
| Redundancy | DC power-backup support; compatible design must be confirmed |
| Display | 1.3-inch touchscreen |
| Management requirement | UniFi Network 9.0.114 or later according to current official specifications |
| Operating temperature | -5 to 40°C |
| Availability | Contact FourTeck to confirm current UAE model and quantity availability |
Specifications should be checked against the exact ordered SKU and the latest vendor documentation. Firmware, software requirements, regional compliance, accessories and packaging can change. The two models share the same basic port layout and switching performance, but their chassis depth, weight, power supply and endpoint-power capabilities differ substantially.
Dependencies that affect the final design
A switch selection is only complete when the surrounding infrastructure is understood. The Pro HD family relies on suitable copper cabling for multi-gigabit operation, compatible SFP+ modules or direct-attach cables for fibre and short-range rack links, and a UniFi control plane that meets the stated application requirement. The PoE version also needs a realistic power calculation rather than a simple count of powered endpoints. A Wi-Fi access point, PTZ camera, intercom, phone and access-control device can have very different power profiles, and start-up or peak consumption may differ from steady operation.
Layer 3 features should be evaluated in the context of the overall gateway and routing design. Local inter-VLAN routing can reduce unnecessary traffic through a gateway in some deployments, but internet security, advanced firewalling, WAN policy and remote-access functions normally remain responsibilities of the selected gateway architecture. Confirm which device will provide DHCP, routing, access control, logging and resilience before implementation.
A practical purchase and deployment journey
Map endpoints
Count users, access points, cameras, phones, servers and other devices. Record link speed and power needs.
Choose the model
Select PoE or non-PoE based on endpoint power, budget, rack depth, heat and electrical planning.
Design uplinks
Allocate 10 GbE copper and SFP+ links, redundancy, aggregation and upstream gateway or core connectivity.
Confirm materials
Specify optics, DACs, patch leads, racks, UPS capacity, backup power and any installation services.
Configure and test
Adopt the switch, update software, configure VLANs and controls, then validate throughput, PoE and failover.
Multi-gigabit access without wasting uplink capacity
Many current laptops, workstations and wireless access points support more than 1 GbE but do not require a dedicated 10 GbE port. The twenty-two 2.5 GbE interfaces provide a useful middle tier. This can support higher-speed Wi-Fi backhaul, faster local file access and denser east-west traffic while controlling cable and endpoint costs. However, the benefit depends on the full path. A 2.5 GbE client connected to a congested 1 GbE uplink will not achieve the expected result. Uplink aggregation, gateway throughput, server links and storage performance should be sized together.
PoE capacity for modern device estates
The USW-Pro-HD-24-PoE is designed for environments with substantial powered-device demand. Its 600 W shared budget and PoE++ support create room for higher-power endpoints, but the switch should not be chosen by budget alone. Confirm the IEEE power class, maximum device draw, cable length, ambient temperature and operational redundancy. Where continuous operation is important, consider how the switch, gateway, controller and powered endpoints will behave during power loss, UPS transfer and maintenance. The non-PoE model is often the more economical and thermally simple option when endpoint power is supplied elsewhere.
Operational control inside UniFi
Central management can reduce the effort needed to identify ports, apply VLANs, observe topology and maintain consistent switch settings across sites. The Pro HD models include Etherlighting indicators that can help technicians identify port status and organisation in supported workflows. Features such as link aggregation, spanning tree, 802.1X controls, DHCP snooping, port isolation, ACLs, voice VLANs, storm control and multicast tools support more structured enterprise operations. These controls still require sound policy design, documentation and testing; they do not automatically create a secure or resilient network.
Ideal business environments
High-density wireless sites
Offices, schools and hospitality sites deploying multi-gigabit Wi-Fi access points can use 2.5 GbE access and 10 GbE uplinks to reduce wired bottlenecks.
Media and production teams
Design studios and content teams may use the port mix for high-speed workstations, shared storage and AV-over-IP applications, subject to traffic engineering.
Surveillance and building systems
The PoE version can support cameras and connected-building endpoints where total power, VLAN separation and recording paths have been properly planned.
Branch and campus distribution
Organisations can use fibre and copper 10 GbE interfaces to connect access layers, gateways, servers or nearby racks within a coordinated network design.
Integration and operational considerations
Check whether the existing network is already managed through UniFi Network and where that application is hosted. A UniFi Cloud Gateway can run the management application, while other supported hosting choices may be used in suitable designs. The switch must be adopted into the intended site, and administrator access, backups, updates and remote-management policy should be agreed before deployment. Existing third-party routers can remain in place, but the division of responsibilities between the gateway and switch must be documented.
Copper multi-gigabit links depend on cable quality and distance. Existing structured cabling should be tested rather than assumed capable. Fibre links require the correct optic type, wavelength, connector and fibre grade. Direct-attach cables can be appropriate inside or between nearby racks, but supported combinations and distance should be confirmed. For voice, video and multicast applications, validate QoS, IGMP and VLAN requirements with the application owner.
The physical environment also matters. Verify rack depth, front and rear clearance, patch-panel layout, airflow, ambient temperature, UPS capacity and cable management. The PoE model is deeper and heavier than the non-PoE model because of its larger internal power system. Electrical design should include switch consumption and attached PoE load, not only the nominal capacity printed on the device.
Questions to resolve before requesting a quotation
Procurement checklist
✓ Exact SKU: USW-Pro-HD-24 or USW-Pro-HD-24-PoE
✓ Required switch quantity and deployment sites
✓ Endpoint inventory and port-speed requirements
✓ PoE class and total power calculation
✓ 10 GbE copper and SFP+ uplink plan
✓ Required transceivers, DACs and patch cables
✓ Rack depth, mounting and airflow
✓ UPS and DC backup requirements
✓ UniFi Network host and software version
✓ VLAN, routing and security-policy scope
✓ Installation and configuration responsibility
✓ Delivery destination and required timeline
How FourTeck can assist
FourTeck can review the requirement before a bill of materials is finalised. This may include comparing the PoE and non-PoE models, checking port allocation, estimating powered-device demand, selecting suitable uplink media and identifying supporting items such as optics, cables, racks or UPS capacity. Where professional services are required, installation, adoption, VLAN configuration, migration planning, testing and documentation can be scoped separately in the quotation.
A useful enquiry includes the exact deployment location, preferred model, quantity, endpoint list, current gateway or controller, required uplink distances and any support expectations. Buyers can also review related business networking products, discuss installation and configuration services, or send the project details through the FourTeck contact page.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the Ubiquiti Pro HD Switch Series. Availability may depend on the exact model, required quantity, regional variant and vendor lead time. Delivery and project coordination can be discussed after the requirement is confirmed. Buyers who need installation, configuration, migration or testing should request those activities as explicit quotation items rather than assuming they are included with hardware supply.
FourTeck can coordinate enquiries for Dubai, Abu Dhabi, Sharjah and Ajman through one combined requirement review. The same model may not be appropriate at every site, especially where endpoint density, rack space, power availability and uplink distance differ. Providing a per-site device count and network diagram helps produce a more accurate material list and implementation scope.
GCC Availability
FourTeck can assist organisations planning Ubiquiti Pro HD switching requirements across GCC markets, including the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman. Support can begin with a review of port density, PoE demand, uplink design, UniFi management architecture and installation scope before quotation coordination. Product availability, licensing or software considerations, delivery schedules, service visits and vendor lead times can vary by country, model, quantity and project conditions. Buyers should provide the destination country, exact switch model or preferred family, required quantity, deployment location, expected timeline and any configuration or installation needs. For regional enquiries, FourTeck can help structure the bill of materials and coordinate the commercial discussion without implying fixed stock or guaranteed delivery. Organisations in Kuwait may also review FourTeck Kuwait technology support for relevant regional coordination.
Africa Availability
FourTeck can help organisations evaluating the Pro HD switch family for African projects by reviewing the exact hardware requirement, power environment, optics, accessories, deployment plan and support expectations. Availability and fulfilment may depend on the destination, selected model, quantity, regional power or compliance requirements, shipping arrangements, vendor lead time and local project conditions. Buyers should share the destination country, number of switches, endpoint and PoE schedule, preferred deployment date and whether remote or onsite assistance is expected. This information helps FourTeck advise on a suitable bill of materials and quotation path. For East African requirements, buyers may refer to FourTeck Kenya and FourTeck Uganda, while broader regional enquiries can be directed through FourTeck Africa. Local inventory, customs outcomes and delivery dates must be confirmed for each project.
Related options and supporting services
UniFi gateway selection
Review firewall, routing, WAN capacity and UniFi hosting requirements alongside the switch design.
Optics and interconnects
Specify compatible SFP+ modules, fibre patching and direct-attach cables based on distance and topology.
Wi-Fi access infrastructure
Match access-point speed and PoE requirements to the switch port plan and upstream bandwidth.
Installation and configuration
Scope rack installation, adoption, VLAN setup, testing, documentation and handover where required.
Why businesses contact FourTeck
The most useful support often happens before the purchase order. FourTeck can help clarify whether the Pro HD family is appropriate, distinguish the two current models, review the network diagram and prepare a more complete bill of materials. This can reduce common omissions such as missing optics, inadequate PoE calculations, unsuitable rack depth, unsupported cabling assumptions or unclear configuration ownership. Assistance can also cover quotation coordination, installation planning, migration sequencing and post-deployment support scope. For company information, visit about FourTeck.
Frequently asked questions
Which models are in the Pro HD switch family?
The current official family listing includes the USW-Pro-HD-24 and USW-Pro-HD-24-PoE. Both provide the same core port mix, while the PoE model adds powered Ethernet and a larger power system.
What is the main difference between the two models?
The USW-Pro-HD-24 does not provide PoE. The USW-Pro-HD-24-PoE supports PoE++ across its copper ports with a 600 W shared PoE budget. Chassis depth, weight and power consumption also differ.
Can every copper port run at 10 GbE?
No. Twenty-two RJ45 ports support up to 2.5 GbE, while two RJ45 ports support up to 10 GbE. The switch also has four 10G SFP+ interfaces.
Does the series support Layer 3 functions?
Yes. Official specifications list local-network functions such as inter-VLAN routing, static routing, DHCP server and DHCP relay. The wider gateway and security design must still be planned separately.
Is a subscription required to manage the switch?
The switch is managed through UniFi Network. Current Ubiquiti guidance describes UniFi remote management as license-free, but hosting, support or optional services may have separate requirements. Confirm the intended control plane.
What UniFi Network version is required?
Current official specifications state UniFi Network version 9.0.114 or later. Check the latest requirement before deployment because software dependencies can change.
Can the PoE model power high-demand access points and cameras?
It can supply up to PoE++ on its copper ports, subject to per-port limits and the shared 600 W budget. Confirm each endpoint’s maximum power requirement and calculate the total load.
Are SFP+ optics included?
Do not assume optics or direct-attach cables are included. Specify the required media, distance and connector type in the quotation request.
Is the Pro HD series available in Dubai?
Contact FourTeck to confirm current Dubai and UAE availability. Supply depends on the selected model, quantity, regional channel and vendor lead time.
What information is needed for a quotation?
Provide the preferred model, quantity, endpoint count, PoE load, uplink design, optics, delivery location, required timeline and any installation or configuration scope.
Confirm the right Pro HD model for your network
Send FourTeck your port schedule, PoE requirements and uplink plan for model guidance, UAE availability confirmation and a requirement-based quotation.