24-port Gigabit access switching for Fortinet environments
Fortinet FortiSwitch FS-124E Network Switch in Dubai, UAE
The FortiSwitch FS-124E is a fanless, non-PoE Layer 2 access switch with 24 Gigabit Ethernet copper ports and four Gigabit SFP slots. It is particularly relevant to businesses maintaining an established Fortinet LAN design, replacing an equivalent unit, standardising branch switching, or evaluating whether an earlier-generation FortiSwitch remains appropriate for a current requirement.
Before you buy
Confirm whether your requirement is for the standard FS-124E or a PoE variant. The standard model does not provide PoE power.
Check FortiGate, FortiLink and FortiSwitchOS compatibility against the software versions used in your environment.
Because this is an earlier-generation model, confirm current hardware availability, support coverage and lifecycle position before committing to a new deployment.
Direct answer: what is the FS-124E and who should consider it?
Fortinet FortiSwitch FS-124E is a 24-port Gigabit Ethernet access switch with four 1GbE SFP uplink slots, a fanless design and FortiGate switch-controller compatibility. It is mainly used to connect wired endpoints such as PCs, printers, servers and other Ethernet devices at the access layer while allowing centralised management in suitable Fortinet deployments. It can make sense for an existing environment that already uses this model, needs like-for-like hardware, or has a design that does not require PoE or 10GbE uplinks. Before proceeding, confirm lifecycle and support status, software compatibility, SFP transceiver requirements, uplink capacity and whether newer FortiSwitch models would provide a better long-term fit.
What the FS-124E does
At its core, the FS-124E provides Layer 2 Ethernet connectivity for devices in a business LAN. Its 24 copper Gigabit ports are used for endpoint connections, while four Gigabit SFP slots can be used for fibre or other compatible uplink media when the correct transceivers are selected. In FortiGate-managed designs, FortiLink can bring switching configuration and access-layer policy into the Fortinet management workflow, subject to supported firmware combinations and topology.
The standard FS-124E is not a power-sourcing switch. If the project includes access points, IP phones, cameras or other devices that depend on Ethernet power, the switch can still carry their data traffic, but an external power source or a PoE-capable switch model would be required.
Who it suits
The FS-124E is most relevant where 24 one-gigabit access ports are sufficient, endpoint power is not required, and a one-gigabit uplink design meets the traffic profile. Examples include branch offices with desktop users, back-office retail networks, administrative departments, small professional offices, training rooms, light server-access segments and existing Fortinet deployments where operational consistency matters more than moving immediately to newer uplink speeds.
It is less suitable for a new design that requires high-density PoE, Wi-Fi access points drawing power from the switch, high-bandwidth aggregation, multi-gigabit edge connectivity or 10GbE uplinks. In those cases, a newer FortiSwitch model should be evaluated before purchasing legacy hardware.
Business problems this switch can help address
Too few wired access ports
A 24-port access switch provides a practical concentration point for users and fixed Ethernet devices when an 8-port desktop switch is no longer sufficient. It also reduces the need for several unmanaged switches scattered around a workplace, provided the cabling and rack design bring those endpoint links back to the communications area.
Fragmented Fortinet management
Where a compatible FortiGate and FortiLink design is already in place, the switch can be incorporated into a centrally managed access architecture rather than treated as an unrelated standalone device. This can help operations teams standardise VLAN and port changes across branch networks.
Noise near staff
The fanless FS-124E can be attractive in suitable office locations where audible fan noise is undesirable. Fanless hardware still needs reasonable ambient temperature and airflow around the chassis, especially when installed with other active devices in a compact cabinet.
Like-for-like estate maintenance
Organisations already operating FS-124E units may value consistency in replacement, spares, software procedures and cabling. For new rollouts, however, lifecycle, support and uplink requirements should be weighed against this convenience.
Core capabilities that matter to buyers
Designed for conventional 1GbE copper access where desktop and fixed-device traffic does not require multi-gigabit edge speeds.
Provides fibre-capable Gigabit uplink options when matched with supported SFP optics and the correct fibre type, distance and connector plan.
FortiLink support allows the switch to participate in compatible FortiGate-managed topologies, subject to software and design requirements.
Useful where the switch is installed in an office or communications area where low acoustic output is valued.
Supports a segmented access design in which groups of devices are separated logically and then governed by routing and security policy elsewhere in the network.
FortiSwitch can also be operated without a FortiGate in supported standalone-management designs. Confirm the exact software path and operational features required.
Is the FS-124E a good fit for your requirement?
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Wired access density | Up to 24 copper Gigabit access connections fit the local design. | Allow spare ports for growth and account for uplink use separately. |
| Endpoint power | Connected devices use their own power supplies or external injectors. | If APs, phones or cameras require PoE, choose a PoE-capable switch instead. |
| Uplink bandwidth | 1GbE SFP uplinks are adequate for expected aggregate traffic. | If 10GbE aggregation is required, evaluate a newer model with SFP+ uplinks. |
| Fortinet management | The existing FortiGate/FortiSwitchOS combination supports the planned FortiLink topology. | Firmware matrix, FortiGate capacity, topology and management mode. |
| Lifecycle planning | A business has a justified reason to maintain or source an earlier-generation model. | Current availability, support entitlement, lifecycle status and newer-model alternatives. |
Fortinet FortiSwitch FS-124E technical information
This table keeps the standard FS-124E separate from the FS-124E-POE and FS-124E-FPOE variants. Where commercial or support details can change, they are marked for confirmation instead of being presented as fixed.
| Brand | Fortinet |
|---|---|
| Product | FortiSwitch 124E |
| Model | FS-124E |
| Product type | Layer 2 managed Ethernet access switch |
| Copper ports | 24 x Gigabit Ethernet RJ45 |
| SFP slots | 4 x Gigabit Ethernet SFP |
| PoE | No PoE on the standard FS-124E |
| Cooling | Fanless |
| Form factor | 1U rack-mount class chassis |
| Published switching capacity | 56 Gbps |
| Published forwarding rate | 83 Mpps |
| Published MAC table | 8,000 addresses |
| Published VLAN scale | Up to 4,000 VLANs |
| Management | FortiGate/FortiLink compatible; supported standalone management is also possible |
| Software position | Model remains referenced in FortiSwitchOS 8.0.0 documentation; confirm the exact release for your environment |
| Ordering position | Earlier-generation model; current Fortinet ordering guidance emphasises newer models. Confirm availability and lifecycle before purchase. |
| Warranty / support | Contact FourTeck to confirm current options for the exact unit and source |
| UAE availability | Contact FourTeck for current options; availability may vary by quantity and vendor lead time |
Important lifecycle and compatibility notice
FS-124E is an earlier FortiSwitch generation. Fortinet’s August 2026 FortiSwitch ordering guide focuses on newer access models, including the FS-124F, while FortiSwitchOS 8.0.0 documentation still contains model-specific references to FS-124E. Those facts should not be interpreted as a guarantee that every FS-124E hardware unit is currently orderable, eligible for every support service, or suitable for every new FortiGate release. Hardware lifecycle and software support are related but distinct procurement questions.
For an existing estate, identify the FortiGate model, FortiOS version, FortiSwitchOS version, management mode, topology and support entitlement. For a fresh network, compare the commercial and operational value of sourcing FS-124E against moving to a newer switch with faster uplinks, current ordering visibility and potentially longer lifecycle runway. FourTeck can help organise that review before the bill of materials is finalised.
Purchase and deployment journey
Define the role
Clarify whether the switch is for a new access layer, expansion, spare or like-for-like replacement.
Check the port design
Count copper endpoints, spare ports, SFP uplinks, fibre distances and any need for PoE.
Validate management
Confirm FortiLink or standalone mode, firmware compatibility and the intended FortiGate relationship.
Compare lifecycle options
Review FS-124E sourcing against newer FortiSwitch options if this is not a strict replacement requirement.
Quote and deploy
Confirm quantity, support, optics, installation scope, configuration tasks and delivery coordination.
24-port access density without unnecessary endpoint power
One of the FS-124E’s clearest buying characteristics is what it does not include: PoE. For some businesses that is an advantage rather than a limitation. If all connected endpoints are PCs, printers, appliances or other devices with independent power, paying for PoE hardware may not add operational value. The 24-port copper layout gives a branch or department enough ports to consolidate a meaningful number of Ethernet endpoints into one rack unit while retaining four SFP positions for uplink choices.
The design becomes less attractive when a site is converging Wi-Fi access points, IP handsets, cameras and other powered devices onto the same access layer. Adding separate injectors to compensate for a non-PoE switch can increase cabling complexity, power-adapter count and troubleshooting effort. Buyers should inventory endpoint power requirements before choosing the standard FS-124E simply because the port count looks correct.
Also consider headroom. A branch with 22 active wired ports today may technically fit, but two spare ports can disappear quickly after a printer, meeting-room system or temporary device is added. A sensible design looks at expected growth, not only the current patch-panel count.
FortiLink management and operational consistency
For organisations already using FortiGate at the branch or campus edge, FortiLink is often the main reason to consider FortiSwitch rather than an unrelated access-switch brand. In a supported FortiGate-managed design, switch discovery, port configuration, VLAN assignment and access-layer policy can be coordinated through the Fortinet management workflow. This can reduce the number of separate interfaces an administrator needs to maintain and can make branch templates easier to standardise.
That benefit depends on version alignment. A switch being listed in current FortiSwitchOS documentation does not mean every FortiGate software release or feature combination should be assumed compatible. Before an upgrade or replacement project, check the supported FortiGate and FortiSwitchOS matrix, FortiLink topology, inter-switch links and any model-specific feature restrictions. This is especially important when an older E-series switch is retained alongside newer FortiSwitch generations.
Standalone operation can also be relevant when there is no FortiGate controller. The management model should be selected intentionally because cloud, local and FortiGate-managed workflows differ. FourTeck can help translate the intended operating model into a configuration and support checklist.
Gigabit SFP uplinks: useful, but not 10GbE
The four SFP slots on FS-124E are Gigabit Ethernet uplinks. They can be useful for connecting to fibre runs between communications rooms, linking to an upstream switch, or creating a physically appropriate handoff where copper is not suitable. The transceiver still has to match the optical design: fibre type, connector, distance, wavelength and the equipment at the far end all matter.
For current networks, the main decision is whether one-gigabit uplinks provide enough aggregate capacity. Twenty-four access ports do not all transmit at full rate continuously in many office networks, so 1GbE uplinks may remain adequate for light or moderate workloads. However, a site with heavy server access, large local file transfers, dense wireless aggregation, video workloads or multiple busy VLANs can create an uplink bottleneck. In that situation, a newer model with 10GbE SFP+ uplinks deserves consideration.
Do not buy an SFP+ transceiver on the assumption that the FS-124E will negotiate it at 10Gbps. The uplink slots are 1GbE SFP. Confirm the exact optic and peer interface before ordering accessories.
Ideal business environments and practical use cases
Existing Fortinet branch
A branch already standardised on FS-124E may need a replacement or matched spare. Preserving known configuration and cabling can be valuable, but support and lifecycle still need confirmation.
Quiet office access
Fanless operation is useful where the switch sits near employees rather than in a dedicated noisy equipment room. Environmental temperature and ventilation must still be suitable.
Wired administrative LAN
Departments with PCs, printers and fixed Ethernet devices that do not require PoE can use the 24-port copper access layer efficiently.
Retail back office
A non-PoE switch may support back-office terminals, local appliances and management systems when point-of-sale and security-device power is handled separately.
Training or classroom wiring
A fixed wired lab can benefit from dense Gigabit ports and VLAN separation when access points and other powered endpoints are not being fed from the same switch.
Legacy estate extension
Where change control or compatibility requirements favour retaining the same switch family, FS-124E can be considered alongside a lifecycle plan for eventual migration.
Integration and operational considerations
A switch purchase should be evaluated as part of the wider LAN. Start with the upstream topology. If the FS-124E will be FortiGate-managed, identify which interface will carry FortiLink, how VLANs will be presented, how inter-switch links are built and whether the design involves one switch or several tiers. If it will operate standalone, document how administration, configuration backup, firmware maintenance and monitoring will be handled.
Next, review physical infrastructure. Confirm rack depth, mounting arrangement, AC power, patch-panel layout, fibre termination and cooling around the switch. Fanless does not mean heat-free. Avoid enclosing network electronics in unventilated cabinetry, and consider the heat load of neighbouring equipment such as a firewall or UPS.
For uplinks, document the SFP optic at each end rather than ordering a fibre module generically. A successful link depends on compatible speed, optical standard, fibre type and distance. If connecting to equipment from another vendor, interoperability should be tested or confirmed against supported transceiver guidance and the receiving platform’s requirements.
Finally, plan operational ownership. Decide who approves VLAN changes, maintains firmware, stores configuration backups and handles replacement. For an earlier-generation model, replacement strategy and support entitlement are particularly important because the future sourcing path may differ from that of currently ordered FortiSwitch models.
Questions buyers should resolve before requesting a quotation
If this is not a like-for-like replacement, ask whether a newer FortiSwitch provides a better lifecycle and uplink fit.
Count active devices, reserved ports, printers, meeting-room equipment and future additions.
The standard FS-124E does not supply PoE. Confirm phones, cameras and access points before finalising the model.
Assess aggregate traffic and future bandwidth, not only the speed of each desktop port.
Provide FortiGate model, FortiOS version, FortiSwitchOS version and management mode for compatibility review.
Share fibre type, distance, connector and the equipment at the remote end.
Procurement checklist for FS-124E
- Confirm exact model: FS-124E, not FS-124E-POE or FS-124E-FPOE.
- Confirm required quantity and whether units must be new, replacement or matching spares.
- Count current and planned 1GbE copper endpoints.
- Verify that endpoint PoE is not required from this switch.
- Confirm number, type and distance of SFP uplinks.
- Identify FortiGate model and FortiOS release when FortiLink will be used.
- Confirm target FortiSwitchOS release and upgrade path.
- Check rack space, mounting hardware, AC power and ventilation.
- Confirm required SFP transceivers and fibre patch leads.
- Review current support entitlement and lifecycle status.
- Define whether installation, configuration or migration assistance is needed.
- Include delivery destination and requested project schedule in the quotation request.
How FourTeck can assist with sizing and procurement
FourTeck can help turn a model request into a clearer bill of materials. For FS-124E, the first step is to determine whether the model is mandatory because of an installed base or whether it is simply the first switch a buyer found with 24 Gigabit ports. That distinction changes the recommendation. A like-for-like replacement can prioritise configuration continuity and rapid fit into an existing topology, while a greenfield purchase should place more weight on lifecycle, uplink speed and future expansion.
Share the number of users and fixed devices, whether any endpoints need PoE, required fibre distances, FortiGate details, VLAN count, management preference and site constraints. FourTeck can then help compare the requested model against suitable alternatives, identify optics and accessory questions, and include configuration or installation scope where required. You can also review wider FourTeck technology products and network and security services when the project extends beyond a switch-only purchase.
For Fortinet-focused requirements, the FourTeck Fortinet UAE resource can help buyers consider the switch in the context of FortiGate, FortiAP and related Fortinet infrastructure rather than evaluating port count in isolation.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the FortiSwitch FS-124E. Because the model belongs to an earlier FortiSwitch generation, sourcing conditions may depend on quantity, supply channel, product condition, support entitlement and vendor lead time. A web listing elsewhere should not be treated as proof that a matching unit is available for a UAE project or that it carries the support terms your organisation requires.
For an accurate quotation, provide the exact model, quantity, delivery destination, required SFP optics, FortiGate environment and any installation or configuration scope. FourTeck can then coordinate the request and advise whether the FS-124E remains the practical choice or whether a current FortiSwitch should be considered. Delivery and project coordination can be discussed after the exact requirement is confirmed.
Dubai, Abu Dhabi, Sharjah and Ajman project coverage
Businesses in Dubai, Abu Dhabi, Sharjah and Ajman can contact FourTeck for requirement review, quotation coordination and project planning around Fortinet switching. The most useful starting information is the number of sites, required switch quantity, current FortiGate and FortiSwitch models, whether the request is a replacement or a new deployment, and the preferred project schedule. Installation and configuration scope should be stated separately so labour, rack work, patching, VLAN setup, FortiLink adoption, testing and handover can be evaluated against the actual site requirement. Hardware availability and service timing remain subject to confirmation and should not be assumed from the model name alone.
GCC Availability
For GCC requirements, FourTeck can help organisations review whether the FortiSwitch FS-124E is appropriate for an installed Fortinet environment and coordinate a quotation around the actual destination and bill of materials. Requests may come from the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain or Oman, but model availability, support options, delivery schedules and service arrangements can differ between markets. Earlier-generation hardware makes this validation especially important. Buyers should provide the destination country, required quantity, whether the switch is a new deployment or replacement, the FortiGate platform in use, required optics and the preferred timeline. If configuration, rack installation or migration is part of the project, that scope should be identified before quotation. For regional enquiries, FourTeck can also coordinate through its broader business technology contact channel and Kuwait technology resources. No stock, customs outcome or fixed delivery time should be assumed until the request has been reviewed.
Africa Availability
FourTeck can assist organisations planning Fortinet network upgrades or replacements across African markets by reviewing the exact model request, required accessories, management design and support expectations. For an FS-124E enquiry, availability may depend on the destination, quantity, unit condition, vendor lead time, support eligibility and whether the project can accept a newer FortiSwitch alternative. East African buyers, including organisations operating in Kenya and Uganda, may also need to consider local fibre standards, rack conditions, power arrangements and the availability of suitable SFP optics. Share the destination country, required quantity, existing FortiGate and FortiSwitch versions, desired deployment schedule and any installation or remote-support needs so the requirement can be assessed properly. FourTeck’s Africa technology resources provide a broader route for regional enquiries. Shipping arrangements, local service coverage, customs outcomes and delivery dates should always be confirmed for the specific project rather than assumed.
Related options and services to compare
FortiSwitch FS-124F
Worth reviewing for a new 24-port non-PoE deployment where newer-generation hardware and 10GbE SFP+ uplinks are more appropriate than the FS-124E’s 1GbE SFP uplinks.
FortiSwitch FS-124F-POE
A relevant option when a 24-port access design also needs PoE for a subset of connected endpoints. Confirm PoE budget and exact powered-device requirements.
FortiSwitch FS-224E
Another 24-port Gigabit access option in current Fortinet ordering guidance. Feature positioning differs, so compare management, routing and design requirements rather than assuming equivalence.
FortiGate integration review
Useful when the main requirement is not simply switching capacity but consistent FortiLink, VLAN and policy integration with an existing FortiGate estate.
Installation and configuration
Add rack installation, optic checks, VLAN setup, FortiLink adoption, testing and documentation when internal resources should not handle deployment alone.
Why businesses contact FourTeck for a switch requirement
A model number is only one line in a network bill of materials. The real procurement decision includes port density, power requirements, optics, management mode, firmware compatibility, support, rack conditions and the expected life of the deployment. FourTeck can help clarify those dependencies before an order is placed, particularly when a buyer is dealing with an earlier-generation model such as FS-124E.
Assistance can include model comparison, FortiGate compatibility discussion, transceiver and fibre questions, quotation coordination, installation planning, migration considerations and configuration scope. For broader infrastructure requirements, visit FourTeck Universal Technology or use the FourTeck Dubai contact page to share your requirement.
What buyers are trying to understand before choosing an FS-124E
Most buyers searching for this model are not simply asking whether it has 24 ports. The more useful questions are whether it still makes sense to buy, whether it differs materially from the newer FS-124F, whether it can power access points, how its SFP uplinks should be used, and whether it will integrate cleanly with an existing FortiGate. Those questions become more important because FS-124E sits between two realities: it is still referenced in current FortiSwitchOS documentation, but Fortinet’s current ordering guide is centred on newer 24-port models. A sensible purchase process therefore needs both technical and lifecycle validation.
Start with configuration continuity. Confirm the failed or ageing unit’s FortiSwitchOS release, FortiLink relationship, VLANs, trunking, SFP optics and physical cabling. A like-for-like replacement can reduce design change, but only if the replacement hardware, software path and support position are acceptable. Do not assume that a used, refurbished or old-stock listing gives you the same support rights as a newly supplied current model.
Treat FS-124E as one candidate rather than the default. The main comparison point is uplink architecture. FS-124E provides 1GbE SFP uplinks, while newer 24-port FortiSwitch models can offer faster uplink options. If the site will remain light in traffic and the commercial and support position are attractive, the older model may still satisfy the port requirement. If the branch will host dense Wi-Fi, local servers, video traffic or several busy VLANs, the uplink ceiling deserves more weight.
The PoE question is a frequent source of wrong orders. FS-124E, FS-124E-POE and FS-124E-FPOE are separate hardware variants. The standard FS-124E is non-PoE. A buyer can easily see a 124E family page and assume power is available because other variants provide it. Before ordering, list every endpoint that depends on Ethernet power. If even a handful of access points, IP phones or cameras need switch-supplied power, compare the cost and operational simplicity of a PoE model with the alternative of injectors or separate power adapters.
The four SFP slots should be planned as part of the building cabling design. They are not automatically internet ports, and they are not 10GbE SFP+ slots. They can carry uplinks, inter-switch connections or fibre runs depending on configuration. The correct optic is determined by the far-end interface, fibre type, distance and optical standard. If the link connects to a third-party switch, confirm interoperability rather than purchasing optics solely by connector appearance.
Quiet operation is another practical concern. Because the standard FS-124E is fanless, it can suit offices where a small rack is installed near staff. Fanless design reduces mechanical noise, but it does not remove the need for ventilation. Keep the chassis unobstructed, avoid sealed cabinets with poor airflow, and consider the heat load of neighbouring equipment, especially if the rack also contains a firewall, UPS or other active electronics.
Buyers also ask whether a FortiGate is mandatory. FortiSwitch supports standalone operation as well as FortiGate-managed designs, and current Fortinet documentation includes FS-124E references in both FortiLink-related and standalone contexts. The best management mode depends on the network. In an established Fortinet branch, FortiLink may provide operational consistency. In a mixed-vendor environment, standalone switching may be more appropriate. What matters is choosing the mode before deployment and validating the feature set required in that mode.
Price searches need context. Public listings for FS-124E vary widely because the model can appear as new old stock, refurbished equipment, used hardware or remaining inventory in different countries. A low web price does not automatically include UAE delivery, support, compatible optics, tax, configuration or warranty terms. For business procurement, compare the complete commercial package rather than the device-only number. A useful quotation request includes quantity, condition requirement, deployment country, FortiGate details, optic needs and whether installation or configuration is expected.
Decision questions that clarify the right next step
Do I need the FS-124E specifically, or just a 24-port FortiSwitch?
If you are replacing a failed unit in a standardised estate, the exact model may minimise change. If you are creating a new site, define the requirement instead: 24 Gigabit ports, uplink speed, PoE, management, support horizon and budget. Once the requirement is clear, FS-124E can be compared fairly against current alternatives rather than chosen by model familiarity alone.
Will one-gigabit uplinks become the bottleneck?
Possibly, depending on traffic concentration. A typical office with mostly cloud applications may not saturate an uplink continuously, while local backups, large file transfers, dense wireless traffic or server-heavy use can create much higher aggregate demand. Review utilisation on the current switch or estimate peak traffic before deciding that 1GbE SFP is sufficient for the next several years.
Can I mix the FS-124E with newer FortiSwitch models?
Mixed generations can exist in Fortinet environments, but the correct answer depends on FortiGate model, FortiOS, FortiSwitchOS, topology and features. Treat software compatibility as a project check, not an assumption. If the existing network has newer F- or G-series switches, document current software levels and intended inter-switch links before adding an E-series unit.
What information speeds up a quotation?
Provide exact model, quantity, deployment country, whether new hardware is mandatory, FortiGate model and software release, number of uplinks, fibre type and distance, expected support term, and whether rack installation or configuration is required. This reduces back-and-forth and helps separate the switch from optics, services and support items.
What if my project includes access points or IP phones?
The standard FS-124E carries Ethernet traffic but will not power those devices. You would need endpoint power adapters, PoE injectors or a PoE-capable switch. Evaluating a PoE switch early is usually cleaner than discovering the power requirement after non-PoE hardware has already been ordered.
Should I replace an entire group of older switches at once?
Not automatically. Consider support status, failure risk, software alignment, available spares, maintenance windows and the business cost of mixed generations. Sometimes a staged migration is sensible; in other cases, replacing a group together simplifies standards and lifecycle management. FourTeck can help structure the comparison around the number of sites and operational impact.
Frequently asked questions about FortiSwitch FS-124E
Does the standard FortiSwitch FS-124E provide PoE?
No. The standard FS-124E is the non-PoE model. FS-124E-POE and FS-124E-FPOE are separate variants. Confirm the exact SKU before ordering if phones, cameras or wireless access points need switch-supplied power.
How many network ports does the FS-124E have?
It provides 24 Gigabit Ethernet RJ45 access ports plus four Gigabit Ethernet SFP slots. The SFP slots are commonly used for fibre or uplink connections when suitable transceivers are selected.
Are the SFP slots on FS-124E 10GbE SFP+?
No. The FS-124E uses 1GbE SFP uplink slots. If 10GbE uplinks are required, evaluate a newer model such as the FS-124F family and confirm the exact specification before purchase.
Can FS-124E be managed by a FortiGate?
Yes, the model is FortiGate switch-controller compatible and is referenced in current FortiLink documentation. The exact FortiGate model, FortiOS version, FortiSwitchOS version and topology should still be checked before deployment or upgrade.
Can the FS-124E operate without a FortiGate?
FortiSwitch supports standalone management modes, and FS-124E appears in standalone-related FortiSwitch documentation. Confirm the management platform and feature requirements for the software release you intend to use.
Is FS-124E still a sensible choice for a new network?
It can still meet a basic 24-port Gigabit, non-PoE requirement, but a new deployment should also compare current FortiSwitch models. Newer models may offer faster uplinks and a clearer current ordering path. Lifecycle, support and price should be considered together.
Is the FortiSwitch FS-124E fanless?
Yes. The standard FS-124E uses a fanless design, which can be useful in quiet office settings. Proper rack ventilation and environmental conditions are still required.
What should I send FourTeck for an FS-124E quotation?
Send the exact model, quantity, destination, whether this is a replacement or new deployment, FortiGate details, SFP optic requirements, support expectations and any installation or configuration scope.
How can I confirm UAE availability?
Contact FourTeck with the required quantity and project details. Availability may depend on the source, quantity, model lifecycle, support requirement and vendor lead time, so it should be confirmed at the time of quotation.
Need to confirm whether FS-124E still fits your network?
Send FourTeck the quantity, FortiGate model, software versions, PoE needs, uplink requirement and deployment location. We can help review the exact switch requirement, suitable alternatives, optics, configuration scope and current UAE quotation options.
Reviews
There are no reviews yet.