HPE Aruba Networking CX 6000 8-Port PoE Switch S4R23A
A fanless 8-port Gigabit access switch with Class 4 PoE, two 1GbE SFP uplinks and a 67W shared PoE budget for compact business networks in Dubai and the UAE.
Direct answer: what is the CX 6000 S4R23A?
The HPE Aruba Networking CX 6000 S4R23A is an entry-level managed access switch for small enterprise and branch networks. It combines eight Gigabit Ethernet downlink ports with Class 4 PoE, two 1GbE SFP uplinks and a maximum shared PoE budget of 67W. It is mainly used to connect and power devices such as IP phones, cameras, wireless access points and other edge equipment while providing VLAN, access-control, QoS and static-routing functions through AOS-CX. It is a strong fit where eight access ports are enough and quiet, fanless operation matters. Before ordering, confirm total device power consumption and uplink type. FourTeck can help determine the correct PoE budget, transceivers, mounting approach and configuration scope for a UAE deployment.
Where this 8-port CX 6000 fits
The S4R23A is positioned for smaller access-layer deployments where a full 24- or 48-port switch would be unnecessary. Its compact chassis and fanless design make it practical for branch offices, meeting-room clusters, retail counters, surveillance edge points and workspaces where acoustic noise should be minimized.
The important sizing point is power rather than port count alone. Each access port can support IEEE 802.3at Class 4 PoE, but the entire switch provides up to 67W of PoE power. A deployment with eight low-power phones may fit comfortably, while a mix of higher-power access points and cameras can exhaust the budget before all eight ports are used. FourTeck can calculate the expected load from device power requirements before a bill of materials is finalized.
Verified technical specifications
| Manufacturer | HPE Aruba Networking |
|---|---|
| Model / product number | S4R23A |
| Product family | HPE Aruba Networking CX 6000 Switch Series |
| Access ports | 8 × 10/100/1000BASE-T |
| Uplink ports | 2 × 1GbE SFP |
| PoE standards | IEEE 802.3af and IEEE 802.3at Class 4 |
| Total PoE budget | Up to 67W shared across powered ports |
| Switching capacity | 20 Gbps |
| Throughput | 14.8 Mpps |
| Average latency | 3.2 μs at 1 Gbps, 64-byte LIFO packets |
| MAC table capacity | 8,192 entries |
| Management / console | Web GUI, CLI, supported HPE Aruba Networking Central management, REST API; 1 × USB-C console and 1 × USB Type-A host |
| CPU / memory | Dual-core ARM Cortex-A9 at 1016 MHz; 2 GB DDR3; 8 GB eMMC |
| Cooling | Fanless |
| Dimensions | 4.39 × 25.4 × 25.5 cm (H × W × D) |
| Configuration weight | 1.88 kg |
| Operating temperature | 0°C to 40°C up to 1.5 km altitude, with altitude derating above that level |
| Power | 100–127 VAC / 200–240 VAC, 50/60 Hz; fixed power supply |
| Maximum power consumption | 16.3W without PoE; 98W with PoE at 230 VAC |
AOS-CX management consistency
The CX 6000 uses the AOS-CX operating system used across the HPE Aruba Networking CX portfolio. For administrators, this provides a consistent configuration model and access to Web GUI, CLI and REST APIs. HPE also supports cloud-based and on-premises Central management options for organizations that want broader network visibility.
PoE for edge devices
IEEE 802.3af and 802.3at support lets the switch deliver data and power over the same Ethernet cabling to compatible endpoints. The practical limitation is the 67W shared budget, so the expected wattage of every powered device should be totaled before ordering.
Compact, quiet deployment
A fanless chassis avoids fan noise and reduces the need to place the switch in a dedicated equipment room. The S4R23A supports horizontal surface or wall mounting, while rack mounting should be planned with the appropriate kit and cabinet space.
Product-fit matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Small PoE access layer | Eight Gigabit edge ports meet the site requirement | Total powered-device load stays within 67W |
| Fiber uplink | 1GbE SFP uplinks are sufficient | Fiber type, distance and transceiver compatibility |
| Quiet workspace | Fanless operation is preferred | Ventilation and operating-temperature limits |
| Managed business network | VLANs, ACLs, QoS and static routing meet the access-layer design | Whether dynamic routing, 10GbE uplinks or greater scale is required |
Licensing and management considerations
The CX 6000 includes its switch software without requiring a separate subscription simply to enable the core switching software. Management can be performed locally through the Web GUI or CLI. HPE Aruba Networking Central is also supported for unified management across wired and wireless infrastructure; any Central service entitlement or subscription required for the intended management model should be confirmed separately during quotation.
HPE Aruba Networking NetEdit is another supported management option for multi-switch configuration and validation workflows, and HPE documentation identifies it as requiring a separate software license. FourTeck can help distinguish what is built into the switch from optional management services so the quotation matches the intended operating model.
Compatibility and uplink planning
The two SFP slots operate at 1GbE and can be used for suitable fiber or copper transceivers. HPE QuickSpecs list examples including 1G SX multimode, 1G LX single-mode and 1G RJ45 transceivers. The exact optic should be selected by fiber type, connector, distance, link partner and vendor support requirements rather than by port type alone.
Deployment considerations for UAE offices
List every powered endpoint and its maximum expected draw. The switch budget is 67W in total, not 67W per port.
Confirm copper category, uplink medium, fiber distance and SFP model before the BOM is approved.
Choose desktop, wall or planned rack placement and keep the switch within its specified operating environment.
Localized power-cord requirements should be confirmed as part of the order configuration.
What to confirm before ordering S4R23A
- Exact product number S4R23A
- Required switch quantity
- Number of active access ports
- Per-device and total PoE demand
- SFP type and fiber distance
- VLAN and static-routing design
- Local or centralized management preference
- Any optional management subscription or license
- Desktop, wall or rack mounting
- UAE-compatible power cord
- Configuration and installation scope
- Current availability and vendor lead time
How FourTeck can assist
FourTeck can review the device list, calculate PoE demand, identify suitable 1GbE transceivers, confirm mounting and power requirements, and prepare a quotation around the intended branch or office design. Configuration scope can also be discussed for VLANs, uplinks, management access, PoE priorities and integration with the existing network.
Explore FourTeck networking products, review installation and configuration services, or contact FourTeck for product sizing.
UAE availability
Contact FourTeck to confirm current Dubai and UAE availability for the HPE Aruba Networking CX 6000 S4R23A. Availability can depend on the exact model, quantity, vendor lead time, localized power requirements and any selected optics or management services. Delivery coordination, configuration and installation scope can be included in the quotation when required.
Frequently asked buyer questions
Does the CX 6000 S4R23A provide PoE on all eight access ports?
The model provides eight Gigabit access ports with IEEE 802.3af/802.3at Class 4 PoE capability. The key constraint is the 67W total PoE budget shared by connected powered devices.
Can it power eight 30W devices at the same time?
No. Although Class 4 PoE can provide up to 30W on a compatible port, eight devices drawing 30W each would require far more than the switch’s 67W total PoE budget. Actual endpoint demand must be calculated.
What uplinks does S4R23A have?
It includes two built-in 1GbE SFP ports. The transceiver type should be selected to match the required medium, distance and link partner.
Is a subscription required to use the switch?
The embedded switch software does not require a separate subscription simply to enable the core switch. Optional centralized management services such as HPE Aruba Networking Central should be quoted according to the required management model.
Is the S4R23A suitable for a quiet office?
Yes. HPE specifies the S4R23A as fanless, making it suitable for many quiet small-office and branch deployments, provided environmental and placement requirements are met.
When should a larger or different switch be considered?
Evaluate another model if you need more than eight access ports, a PoE budget above 67W, 10GbE uplinks, higher aggregation capacity or routing capabilities beyond the CX 6000 access-layer feature set.
Confirm the right CX 6000 configuration for your site
Share your port count, powered-device list, uplink requirements and preferred management approach. FourTeck can help validate the S4R23A against the actual deployment before quotation.
Reviews
There are no reviews yet.