HPE Aruba Networking • JL678A • Non-PoE Access Switching
HPE Aruba Networking CX 6100 24G 4SFP+ Switch
A 24-port Gigabit managed access switch with four 1/10GbE SFP+ uplinks for branch, SMB and enterprise edge networks that do not require PoE from the switch.
Direct Answer for Buyers
The HPE Aruba Networking CX 6100 24G 4SFP+ Switch (JL678A) is a managed, fixed-port, non-PoE access switch built for business wired networks. It is mainly used to connect up to 24 Gigabit Ethernet endpoints and provide four 1/10GbE SFP+ uplinks toward aggregation, core or server-side infrastructure. It suits branch offices, SMB networks and enterprise access-layer deployments where connected devices have their own power source. The most important point to confirm before ordering is whether the site needs PoE; if phones, access points or cameras must receive power from the switch, a PoE CX 6100 model should be evaluated. FourTeck can help confirm port count, uplink optics, management approach, accessories, configuration scope and UAE availability.
What the JL678A Does in a Business Network
JL678A is the 24-port non-PoE member of the HPE Aruba Networking CX 6100 access-switch family. Its 24 copper ports are intended for ordinary Ethernet endpoints such as desktop PCs, printers, servers, appliances and other devices that do not need electrical power delivered over the network cable. Four built-in SFP+ interfaces provide 1GbE or 10GbE uplink flexibility, which is useful when a branch or access closet needs more uplink headroom than a single Gigabit connection.
The switch runs HPE Aruba Networking AOS-CX and supports enterprise access functions including VLAN-based segmentation, access control lists, quality of service, IPv6 and static routing. It is best understood as an access-layer switch rather than a replacement for a high-capacity core or advanced routing platform. The right choice depends on endpoint count, PoE requirement, uplink architecture, redundancy goals and the management platform used by the organization.
Verified Technical Specifications
| Manufacturer | HPE Aruba Networking |
|---|---|
| Product / Part Number | CX 6100 24G 4SFP+ Switch / JL678A |
| Access Ports | 24 x 10/100/1000BASE-T |
| Uplink Ports | 4 x 1G/10G SFP+ |
| Console / Host | 1 x USB-C console port; 1 x USB Type-A host port |
| PoE | Non-PoE |
| Switching Capacity | 128 Gbps |
| Throughput | 95.2 Mpps |
| Latency | 1 Gbps: 1.5 µs; 10 Gbps: 1.8 µs |
| CPU / Memory | Dual-core Arm Cortex A9 at 1.016 GHz; 4 GB DDR3; 16 GB eMMC |
| Packet Buffer | 12.38 MB |
| Maximum Power Consumption | 33 W |
| Input Voltage | 100–127 VAC / 200–240 VAC |
| Power Supply / Fans | Fixed power supply; fixed fans |
| Dimensions | 4.39 cm (H) x 44.2 cm (W) x 20.12 cm (D) |
| Configuration Weight | 2.62 kg |
| Operating Temperature | 0°C to 45°C up to 1.5 km altitude, with documented derating at higher altitudes |
| Management | HPE Aruba Networking Central, Web GUI, CLI and HPE Aruba Networking Switch Multi-Edit Software |
Specifications can change with product revisions and software releases. Confirm the exact BOM, software support and regional ordering details before purchase.
Where This Switch Fits
| Requirement | Suitable When | Confirm Before Ordering |
|---|---|---|
| 24-port access layer | The site needs up to 24 copper Gigabit endpoint ports. | Allow for growth, spare ports and any separate management connections. |
| 10GbE uplinks | Access traffic should aggregate over one or more 10GbE fiber or DAC links. | Transceiver/DAC compatibility, media type, distance and upstream port type. |
| Non-PoE endpoint access | Connected devices have independent power. | If APs, cameras or IP phones require PoE, evaluate JL677A or another PoE model. |
| Centralized management | The organization wants HPE Aruba Networking Central for unified operations. | Central subscription tier, term and device coverage are separate considerations. |
Four 1/10GbE SFP+ Uplinks
Four high-speed uplink interfaces reduce the need to consume copper access ports for upstream connectivity. They can support fiber transceivers or other compatible SFP/SFP+ media options, subject to the HPE Aruba Networking transceiver support matrix. Optics must be selected according to link distance, fiber type and the upstream switch.
AOS-CX Operating Model
AOS-CX provides a consistent operating environment across the CX portfolio, with CLI, web management and programmable REST interfaces. This is useful for organizations standardizing operational processes across multiple access switches, while the exact automation and monitoring approach should be aligned with existing network tools and change-control practices.
Access Policy and Traffic Control
The CX 6100 family supports access control lists, quality of service, IPv6 and static routing. These capabilities help separate endpoint groups, prioritize traffic and provide basic routed reachability where appropriate. Network architects should still validate whether the intended design requires more advanced routing, redundancy or campus-fabric functions from a higher-tier platform.
VSF Expansion Option
The CX 6100 series supports Virtual Switching Framework stacking for up to six members. This can simplify administration by presenting multiple switches as a coordinated system. Stack design, software version, uplink use and physical topology should be planned before deployment rather than treated as an afterthought.
Licensing and Subscription Considerations
Core switch operation: HPE documentation states that the CX 6100 switch software is embedded and does not require a software subscription to enable the switch’s base operation. This helps buyers separate the hardware purchase from optional management-service decisions.
HPE Aruba Networking Central: Central is an optional management platform with its own per-device subscription/licensing structure and feature tiers. If the switch will be managed through Central, confirm the current subscription type, term and required feature level as part of the bill of materials. Do not assume that purchasing JL678A automatically includes a Central subscription.
Compatibility and Integration Checks
- Confirm SFP/SFP+ transceivers or DAC cables against the current HPE Aruba Networking transceiver support guidance.
- Match uplink speed, media and connector type to the upstream aggregation or core switch.
- Check the intended AOS-CX software release against operational standards, features and management tooling.
- Confirm rack depth, ventilation and access to the fixed AC power supply before installation.
- If Central management is planned, validate the appropriate Central license and subscription term.
- For VSF designs, confirm member models, topology and uplink allocation before finalizing optics and cabling.
Where JL678A Fits in the CX 6100 Family
JL678A occupies the 24-port non-PoE position in the CX 6100 family. It is a logical fit when a business needs a standard 24-port access density and four SFP+ uplinks but does not need the switch to power endpoints. That distinction matters because PoE budget is one of the main factors affecting both model choice and project cost.
For similar port density with Class 4 PoE, the CX 6100 24G Class4 PoE 4SFP+ 370W model JL677A is the closer family alternative. Organizations needing more copper endpoints should compare 48-port CX 6100 options, while smaller locations may benefit from a lower-density model. If the design requires more advanced routing, resiliency or broader campus switching functions, a higher-tier CX family should also be evaluated.
When This Model May Fit
- Up to 24 Gigabit copper endpoints are required.
- Endpoints do not need PoE from the switch.
- 1/10GbE SFP+ uplinks suit the access design.
- AOS-CX is aligned with the organization’s switching standard.
- Static routing and Layer 2 access functions cover the site requirement.
When Another Option Should Be Evaluated
- PoE is required for phones, cameras or wireless access points.
- More than 24 access ports are needed or near-term growth is expected.
- Advanced Layer 3 routing or higher resiliency is part of the design.
- Different uplink speeds or interface types are required.
- A fanless switch is required for a noise-sensitive workspace.
Deployment and Installation Considerations
- Confirm the endpoint map. Count active ports, spare capacity and any devices requiring PoE before committing to the non-PoE JL678A.
- Design the uplinks. Decide whether uplinks will run at 1GbE or 10GbE, whether links will be aggregated, and which optics or DAC cables are needed.
- Prepare rack and power. The switch is suitable for standard 19-inch rack installation and uses a fixed internal power supply. Ensure ventilation and service access are adequate.
- Define management. Choose local Web GUI/CLI operation, Multi-Edit, Central management or an approved mix according to the site’s operational model.
- Agree configuration scope. VLANs, trunks, access policies, QoS, management IP addressing, static routes, monitoring and backup procedures should be documented before handover.
Questions to Resolve Before Ordering
Does JL678A provide PoE?
No. JL678A is the non-PoE 24-port model. If powered Ethernet endpoints are part of the requirement, select a PoE-capable switch rather than adding assumptions to the design.
Does the switch need a software subscription to operate?
No subscription is required to enable the base CX 6100 switch software. HPE Aruba Networking Central management is a separate subscription consideration when that cloud management option is selected.
Are SFP+ optics automatically included?
Do not assume they are included. The required transceiver or DAC type depends on distance, media, speed and the device at the other end of the link; the exact BOM should be confirmed before ordering.
Procurement Checklist for a Dubai or UAE Project
How FourTeck Can Assist
FourTeck can help translate a network requirement into an accurate switch bill of materials rather than treating the hardware as an isolated line item. For JL678A projects, that can include verifying the non-PoE requirement, confirming port count, identifying suitable uplink media, reviewing compatibility, defining Central licensing where required, and agreeing installation or configuration scope.
Explore business technology products, review installation and configuration services, or contact FourTeck for product sizing and quotation.
UAE Availability Guidance
Contact FourTeck to confirm current UAE availability for the exact JL678A model. Availability can depend on quantity, regional ordering code, vendor lead time, requested support, optics, accessories and project scope. Delivery coordination and installation timing should be discussed after the bill of materials and deployment requirements are confirmed. No stock or delivery date should be assumed until the quotation is issued.
Related Options to Compare
Compare when the same general 24-port density is required but endpoints need PoE.
Evaluate when the access closet needs materially more copper endpoint capacity.
Consider when unified cloud-based monitoring and management are part of the operational requirement.
Useful when VLANs, trunks, access policy, uplinks and handover standards must be implemented consistently.
Frequently Asked Questions
What is the manufacturer part number for this switch?
The HPE Aruba Networking CX 6100 24G 4SFP+ non-PoE switch is identified by part number JL678A.
How many copper and uplink ports does JL678A have?
It has 24 x 10/100/1000BASE-T access ports and four 1G/10G SFP+ uplink ports.
Is JL678A suitable for IP phones or Wi-Fi access points?
It can carry their Ethernet traffic, but it does not supply PoE. If those devices need power over Ethernet from the switch, a PoE model should be selected.
Can the CX 6100 be managed with HPE Aruba Networking Central?
Yes. Central is one of the documented management options, but its subscription licensing is separate from the base switch software.
Can JL678A participate in VSF stacking?
The CX 6100 family supports VSF stacking for up to six members. The exact topology, software and uplink design should be validated for the planned stack.
What should be included in a quotation request?
Provide quantity, site details, endpoint count, uplink speed and distance, fiber type, required optics, management preference, configuration scope and any support requirements.
How can UAE availability be confirmed?
FourTeck can check current availability and lead time after confirming the exact JL678A requirement, quantity, accessories and project scope.
Confirm the Right CX 6100 Configuration
Send FourTeck your port count, PoE requirement, uplink distances, management preference and quantity so the switch, optics, licensing and implementation scope can be reviewed together.
Reviews
There are no reviews yet.