PoE power conversion for compact devices
MikroTik GPOE-USB in Dubai, UAE
The MikroTik GPOE-USB helps businesses deliver stable 5 V power to compatible USB-C and two-wire DC devices over an existing PoE connection while retaining 2.5 Gigabit Ethernet passthrough. It is a practical accessory for projects where adding a mains outlet is inconvenient, expensive, or visually undesirable.
Planning a UAE deployment?
Share the powered device, quantity, PoE source, cable route, and installation location for compatibility and quotation guidance.
802.3af/at
5 V USB-C and DC power
Two 2.5G Ethernet ports
Confirm load and connector fit
Direct answer for buyers
The MikroTik GPOE-USB is a PoE-powered converter that changes standard 802.3af/at input into stable 5 V output for compatible USB-C and two-wire DC devices, while allowing Ethernet traffic to pass through at up to 2.5 Gigabit speeds. It is mainly used when an endpoint needs both network connectivity and low-voltage power but no convenient mains outlet is available. IT teams, integrators, IoT installers, digital-signage planners, and facilities teams may consider it. Before proceeding, confirm the endpoint’s exact voltage and current demand, whether it needs data passthrough, the available PoE standard, cable quality, mounting position, indoor environment, and required accessories.
What the GPOE-USB does
A conventional PoE network carries electrical power and data over Ethernet cabling. Many compact devices, however, cannot accept PoE directly. They may expect 5 V through USB-C or a two-pin DC terminal. The GPOE-USB bridges that electrical mismatch. It receives standards-based PoE, converts the incoming power to a low-voltage output, and keeps an Ethernet path available for the connected device or nearby network endpoint.
This approach can reduce visible cabling, avoid separate plug-top adapters, and simplify placement of equipment in kiosks, reception areas, control panels, meeting spaces, retail displays, laboratories, classrooms, utility rooms, and other locations where power sockets are limited. It does not replace a PoE switch, nor does it make every USB-C device compatible. It should be treated as part of a complete power-and-network design.
Who should consider it
The product may suit system integrators building compact IoT nodes, IT departments mounting tablets as dashboards, facilities teams deploying sensors, developers using Raspberry Pi boards, and MikroTik users who need to power selected USB-C devices from a standards-compliant PoE source. It can also support trial installations where a single Ethernet run is preferable to separate data and mains cabling.
It is not automatically suitable for laptops, high-power tablets, USB Power Delivery devices requiring negotiated voltages above 5 V, outdoor unprotected installations, or endpoints that draw more current than the converter can supply. Buyers should confirm electrical requirements from the endpoint manufacturer rather than relying only on connector shape.
Business problems this accessory can help address
No nearby socket
A wall-mounted device may be positioned far from a safe or convenient AC outlet. Using an existing PoE cable can provide a cleaner route, subject to power-budget and cable checks.
Too many adapters
Separate power bricks increase clutter and create more points that can be accidentally unplugged. Centralised PoE can make physical installation easier to organise.
Need for faster data
The two 2.5G Ethernet ports preserve a multigigabit network path, useful where the connected design needs more than standard Gigabit throughput.
Low-voltage device integration
The USB-C and DC output choices broaden deployment options, provided the endpoint is genuinely compatible with 5 V input and the available current.
Product-fit decision matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Power a USB-C endpoint | The endpoint accepts 5 V and stays within the available total output | Voltage, current, connector orientation, cable length |
| Power a two-wire DC device | The equipment is designed for regulated 5 V DC input | Polarity, terminal preparation, installer competence |
| Retain network connectivity | The design benefits from Ethernet passthrough up to 2.5G | Switch, endpoint, cable and negotiated link speed |
| Use central PoE power | An 802.3af/at source and adequate port budget are available | Switch class, total budget, UPS strategy, cable loss |
| Deploy in a harsh location | Only when the enclosure and environment remain within ratings | Indoor protection, IP20 limitation, heat, dust and moisture |
Verified technical information
| Brand | MikroTik |
|---|---|
| Product code | GPOE-USB |
| Product type | PoE to 5 V USB-C and DC converter with Ethernet passthrough |
| PoE input | 802.3af/at |
| Ethernet ports | 2 × 2.5G Ethernet |
| Power output | Approximately 15 W total, up to 3 A at 5 V across outputs |
| Output connections | 1 × USB-C output and 1 × DC terminal output |
| Dimensions | 76 × 40 × 24 mm |
| Tested ambient temperature | -40°C to 70°C |
| Ingress rating | IP20 |
| Included item | K-96 fastening set, subject to regional package confirmation |
| UAE availability | Contact FourTeck for current options, quantity and lead time |
Compatibility and dependency notice
USB-C describes a connector, not a guaranteed power profile. Some devices require USB Power Delivery negotiation, higher voltage rails, proprietary charging behaviour, or more than 15 W. Such devices may not operate correctly from a fixed 5 V source. Before specifying the GPOE-USB, obtain the endpoint data sheet and confirm its accepted input voltage, maximum current, startup surge, connector role, and whether it needs data over USB-C or only power.
The PoE source must support 802.3af or 802.3at and have adequate remaining power budget. Cable length, conductor quality, patch-panel connections, temperature, and the number of powered devices can affect the practical design. The IP20 rating means the unit should not be treated as weatherproof. For dusty, humid, exposed, or publicly accessible locations, an appropriate enclosure and installation method may be required.
A practical purchase and deployment journey
Define the endpoint
Record the exact make, model, power rating, Ethernet interface and mounting location of the device to be powered.
Check the PoE source
Confirm the switch or injector standard, port capacity, total power budget, UPS coverage and cabling route.
Validate compatibility
Compare voltage, current, polarity, connector type, data needs and environmental conditions before procurement.
Build the quotation
Include quantity, patch leads, enclosures, mounting items, installation labour and testing requirements where needed.
Test before rollout
Validate one complete installation under realistic load and network conditions before a wider deployment.
Clean power delivery where mains access is difficult
The central operational value of the GPOE-USB is its ability to relocate the final power conversion point closer to the endpoint. Instead of running a separate AC circuit or placing a plug-top adapter behind a display, an installer can use structured Ethernet cabling from a PoE switch and convert to 5 V near the device. This is particularly useful when aesthetic requirements, furniture design, tenant restrictions, or building access make additional electrical work undesirable.
Centralised PoE can also simplify shutdown and backup planning because the power source may be connected to a UPS in the communications room. That does not automatically guarantee uninterrupted operation; the switch, uplinks, endpoint, and any intermediate equipment must all be included in the backup design. Nevertheless, consolidating power can make the architecture easier to document and maintain.
For wall dashboards, room-booking panels, sensor gateways, low-power controllers, and compact computing boards, the ability to use one cable route can reduce installation complexity. Buyers should still consider service access. A converter hidden above a ceiling or inside joinery must remain reachable for inspection and replacement. Cable strain relief and secure mounting should be planned rather than improvised.
2.5 Gigabit passthrough for modern edge devices
Many inexpensive PoE-to-USB adapters are designed only for 100 Mbps or 1 Gigabit Ethernet. The GPOE-USB includes two 2.5G Ethernet ports, allowing a faster wired path when the switch, cabling, and connected equipment support that rate. This can matter for Wi-Fi 6 or Wi-Fi 7 edge equipment, high-resolution media endpoints, compact servers, test devices, and local controllers that exchange larger amounts of data.
A 2.5G port does not mean every installation will run at 2.5 Gbps. The negotiated speed is determined by the slowest compatible element in the link. Category cabling condition, connector quality, switch-port capability, endpoint interface, and configuration all affect the result. For a simple sensor that uses little bandwidth, the faster port may provide no practical advantage, but it keeps the accessory useful across a wider range of designs.
Where high throughput is important, include a link test in the handover process. Confirm negotiated speed, packet stability, latency, and sustained transfer behaviour under the intended load. This is more reliable than assuming performance from a port label alone.
Flexible USB-C and terminal output options
The combination of a USB-C power output and a two-pin DC terminal gives installers more flexibility than a single fixed lead. USB-C is convenient for compatible tablets, development boards, and MikroTik devices that accept 5 V through that connector. The DC terminal can support low-voltage controllers, sensors, and embedded equipment that use bare-wire or terminal connections.
The flexibility also creates responsibility. Terminal wiring must be completed with correct polarity, conductor preparation, insulation, and strain relief. Incorrect polarity can damage equipment. USB-C equipment must be checked for fixed 5 V acceptance; devices that depend on higher-voltage Power Delivery profiles should not be assumed compatible. The total output capacity is shared, so simultaneous use of both outputs requires careful current calculation.
For repeatable commercial deployments, document the approved endpoint models, cable assemblies, connector pinout, measured current draw, and installation method. This turns a one-off accessory into a controlled component of the bill of materials.
Ideal environments and use cases
Wall-mounted information tablets
Power a compatible 5 V tablet used for room booking, visitor registration, dashboards, or digital control without placing an exposed adapter near the mount.
Raspberry Pi and development nodes
Support compact computing projects where Ethernet and central PoE power are preferred, subject to board, peripheral, and startup-current requirements.
Environmental monitoring
Connect compatible air-quality sensors, monitoring gateways, and controllers in offices, classrooms, warehouses, and controlled technical spaces.
Selected MikroTik endpoints
Power compatible USB-C MikroTik devices that do not include native PoE-in, after checking the exact model and current consumption.
Retail and kiosk equipment
Reduce visible power cabling around counters, display points, and compact kiosks where a structured network run is already available.
Automation and control panels
Provide 5 V power to suitable low-voltage controllers through the DC terminal while maintaining a documented and centrally powered network design.
Integration and operational considerations
Start with the PoE switch. Review whether the relevant port supports 802.3af/at, whether automatic detection is enabled, and whether the switch has enough aggregate power budget for all connected loads. A port may be capable of supplying the converter while the switch as a whole lacks sufficient budget during peak operation. Where resilience matters, check whether the switch is backed by UPS power and whether redundant network paths are required.
Next, review structured cabling. Damaged conductors, excessive length, poor terminations, and low-quality patch leads can cause voltage drop or unstable links. The Ethernet path should be certified or tested where the device performs a business-critical role. Avoid routing or mounting methods that place tension on the GPOE-USB ports.
Finally, plan support ownership. Decide who will monitor the endpoint, who can access the converter, how faults will be isolated, and whether a spare unit is required. A remote device that loses power may appear to have a network fault, so troubleshooting guidance should distinguish PoE source issues, converter issues, cabling faults, and endpoint failures.
Questions to resolve before ordering
- What exact device will receive power?
- Does it accept fixed 5 V input?
- What is its normal and peak current draw?
- Does it require USB Power Delivery negotiation?
- Will USB-C or the DC terminal be used?
- Is Ethernet passthrough required?
- What link speed must be maintained?
- Which PoE switch or injector will supply power?
- How long is the cable route?
- Is the location protected from moisture and dust?
- How will the converter be mounted and accessed?
- Are installation and testing services required?
Procurement checklist
How FourTeck can assist
FourTeck can help buyers move from a product name to a complete and supportable requirement. This can include reviewing the intended endpoint, checking the stated power input, identifying the PoE source, discussing cable distance, confirming quantity, and clarifying whether mounting, patch leads, enclosures, or installation work should be included in the quotation.
For larger rollouts, FourTeck can help structure a pilot-first approach. One representative location can be tested before the full quantity is deployed. The pilot should confirm power stability, Ethernet negotiation, endpoint startup behaviour, heat, physical mounting, user access, and support procedures. Any approved cable or connector choices can then be captured in the bill of materials.
Visit the FourTeck technology products section for related infrastructure options, review available installation and configuration services, or contact FourTeck with the project details.
UAE availability and support guidance
Contact FourTeck to confirm current MikroTik GPOE-USB availability in the UAE. Supply can depend on quantity, regional allocation, vendor lead time, and the timing of the project. Delivery and project coordination can be discussed after the exact requirement is confirmed. Installation and configuration scope should be included in the quotation when required rather than assumed to be part of the hardware purchase.
For deployments across Dubai, Abu Dhabi, Sharjah, and Ajman, provide the destination, site access conditions, device quantity, endpoint details, cable route, and preferred deployment schedule. This enables a more accurate review of logistics and service needs without making unsupported assumptions about stock or delivery time.
GCC Availability
FourTeck can assist businesses planning MikroTik GPOE-USB deployments across GCC markets by reviewing the intended endpoint, confirming the required quantity, discussing the PoE source, and coordinating a quotation based on the destination and project scope. Requirements in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain, and Oman may differ because procurement channels, delivery routes, electrical practices, site access, and vendor lead times can vary. Buyers should provide the destination country, exact powered device, expected current draw, required Ethernet speed, quantity, installation location, and target schedule. Product availability, delivery planning, onsite service, and regional fulfilment should be confirmed for each request. FourTeck can also discuss configuration scope, pilot testing, installation planning, and support expectations. For Kuwait-related enquiries, buyers may also review FourTeck Kuwait technology support.
Africa Availability
Organisations planning projects in Africa can contact FourTeck for guidance on the MikroTik GPOE-USB, related PoE equipment, compatible accessories, and deployment requirements. Availability and fulfilment may depend on destination, quantity, shipping arrangements, vendor lead time, power and regulatory considerations, and the level of installation or support required. Buyers in East Africa and other regions should share the destination country, endpoint model, quantity, preferred schedule, and any expectations for configuration, mounting, testing, or local coordination. FourTeck can help review the proposed design and prepare a requirement-based quotation without assuming local inventory or guaranteed delivery. Relevant regional resources include FourTeck Kenya, FourTeck Uganda, and the wider FourTeck Africa technology portal.
Related products and services to consider
802.3af/at PoE switches
The GPOE-USB needs a compatible PoE source with adequate per-port and total power budget.
2.5G network switching
Use multigigabit switching where the endpoint and wider design need more than 1 Gbps.
Structured cabling services
Correct cable selection, termination, testing and labelling support reliable power and data delivery.
Mounting and enclosure planning
Indoor enclosures, strain relief and secure placement may be required depending on the site.
PoE budget assessment
Review switch capacity, UPS runtime and connected loads before expanding the number of powered endpoints.
Pilot deployment support
Validate electrical, network and physical fit in one representative location before a wider rollout.
Why businesses contact FourTeck
A small accessory can still create project risk when voltage, current, cabling, or mounting assumptions are wrong. Businesses contact FourTeck for practical requirement clarification, product and accessory selection, bill-of-material guidance, compatibility review, quotation coordination, installation planning, and support-scope discussion. The objective is to help the buyer order a suitable solution rather than simply match a model name.
FourTeck can also help identify where the GPOE-USB should not be used. A device that requires higher-voltage USB Power Delivery, more than the available output, outdoor exposure without protection, or a different PoE standard may need another approach. Early identification of such constraints reduces rework and makes the final quotation clearer.
Frequently asked questions
What is the MikroTik GPOE-USB used for?
It converts 802.3af/at PoE input into stable 5 V power for compatible USB-C or two-wire DC devices while preserving a 2.5G Ethernet passthrough path.
Does it support every USB-C device?
No. USB-C is only the connector format. The endpoint must accept 5 V input within the available current and must not depend on an unsupported Power Delivery profile.
How much power can it provide?
The stated total output is approximately 15 W, up to 3 A at 5 V across the available outputs. Confirm the connected load before deployment.
Which PoE standards are accepted?
The official specification lists 802.3af/at PoE input. The supplying switch or injector must support a compatible standard and have enough power budget.
Can it pass 2.5 Gigabit Ethernet?
It has two 2.5G Ethernet ports. Actual link speed depends on the switch, endpoint, cable quality and negotiated capabilities.
Can both output types be used?
Potential use depends on the combined load and wiring design. The total available current is shared, so compatibility and current calculations must be completed first.
Is it suitable for outdoor installation?
The listed IP20 rating does not indicate weatherproof protection. Outdoor or exposed use would require an appropriate enclosure and environmental review.
What information is needed for a quotation?
Provide quantity, destination, endpoint model, power requirement, PoE source, cable length, mounting needs, installation scope and preferred schedule.
Is installation included?
Installation is scope dependent and should be requested in the quotation. Hardware supply alone should not be assumed to include site work, cabling or testing.
How can UAE availability be confirmed?
Contact FourTeck with the required quantity and project details. Availability and lead time depend on current regional supply and the exact requirement.
Confirm the model, powered device and PoE source
Send FourTeck the endpoint model, quantity, location, power requirement and installation scope for a requirement-based MikroTik GPOE-USB quotation.
Reviews
There are no reviews yet.