MikroTik LHG XL 5 ax in Dubai, UAE
Build a focused wireless bridge between distant sites with a 27 dBi directional antenna, 5 GHz Wi-Fi 6 radio, Gigabit Ethernet and RouterOS v7. The LHG XL 5 ax is intended for professionally planned outdoor links where line of sight, alignment, frequency planning and mounting quality are as important as the hardware itself.
Before requesting a quote
Share the two site locations, approximate distance, mounting heights, expected bandwidth, existing network interfaces, power arrangement and installation requirement. A reliable link design cannot be based on distance alone.
LHG-5axD-XL
Integrated 27 dBi grid
5 GHz 802.11a/n/ac/ax
12–28 V passive PoE
RouterOS v7, Level 3
Direct answer for buyers
The MikroTik LHG XL 5 ax is a high-gain outdoor customer-premises device for directional 5 GHz wireless links, particularly point-to-point bridges between separated buildings or remote network locations. It combines a 27 dBi dual-polarisation grid antenna with a Wi-Fi 6 radio, one Gigabit Ethernet port and RouterOS v7. Businesses, integrators, estates, farms, logistics sites and service providers should consider it when a clear radio path can be established. Before proceeding, confirm line of sight, Fresnel clearance, legal channel and power limits, required bandwidth, mounting strength, cable route, grounding, lightning protection and whether one or two units are required.
What it does
The device concentrates radio energy into a narrow directional beam, allowing two suitably aligned locations to exchange network traffic over a greater distance than a typical indoor access point. In bridge mode it can extend a LAN between buildings. RouterOS also supports routing, firewalling, traffic management and monitoring where required. Actual throughput depends on spectrum, channel width, signal quality, alignment, distance, weather and configuration.
Who it suits
It suits buyers who need a professionally installed outdoor link rather than general indoor Wi-Fi coverage. Typical users include warehouses connecting a gatehouse, schools linking blocks, construction sites extending connectivity, farms reaching remote offices, hospitality sites joining separate facilities and network operators serving customer locations. It is not suitable where buildings block the path, omnidirectional coverage is required or regulations prevent the proposed radio plan.
Business challenges this model can address
Connecting separated buildings
A directional bridge can carry network traffic where trenching, road crossings or property restrictions make new cabling difficult. A path survey is essential because visual line of sight does not always guarantee Fresnel clearance.
Extending service to remote operations
Remote offices, depots and field facilities may be served from an existing network location. The design must account for application demand, latency sensitivity, resilience and the effect of a single wireless path failing.
Replacing ageing outdoor links
Organisations using older links may evaluate the ax model for improved radio efficiency, WPA3 capability and a current RouterOS platform. Migration requires compatibility review because operating modes may differ from legacy equipment.
Supporting temporary projects
A wireless bridge can support construction compounds and temporary facilities when mounting, power and regulatory conditions are suitable. Safe mounting, grounding and weatherproof cabling remain necessary.
Core capabilities
The 27 dBi antenna is designed for long-range links under suitable conditions.
802.11ax supports improved spectral efficiency and modern modulation.
One 10/100/1000 Ethernet port carries data and passive PoE input.
Routing, bridging, firewall and traffic-management options are available in RouterOS v7.
Product-fit matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Building-to-building bridge | Both ends have clear line of sight and stable mounting points. | Distance, heights, Fresnel clearance, bandwidth and paired-unit quantity. |
| Remote site connectivity | A focused 5 GHz path is feasible and continuity needs are understood. | Redundancy, power backup, monitoring and support response. |
| Outdoor CPE deployment | Professional installation and compliance can be provided. | Country profile, permitted channels, EIRP and DFS obligations. |
| High-capacity wireless link | Expected real throughput fits within radio and Ethernet limits. | Channel availability, interference, encryption and traffic profile. |
Verified technical information
| Brand | MikroTik |
|---|---|
| Model | LHG-5axD-XL |
| Product type | Outdoor directional wireless CPE |
| CPU | IPQ-5010 dual-core, 800 MHz |
| Memory | 256 MB RAM, 128 MB NAND |
| Wireless | 5 GHz 802.11a/n/ac/ax, two chains |
| Maximum radio rate | 1200 Mbit/s theoretical; real throughput varies |
| Antenna gain | 27 dBi at 5 GHz |
| Ethernet | 1 × Gigabit Ethernet |
| Power | 12–28 V passive PoE, 5 W maximum |
| Operating system | RouterOS v7, Level 3 |
| Environment | IP54; tested -40°C to 70°C |
| Included | 24 V adapter, Gigabit PoE injector, K-LHG kit and hose clamps |
| Availability | Contact FourTeck for current UAE options |
Compatibility and deployment dependencies
Selection should not be based only on maximum radio rate or theoretical distance. A working link depends on two compatible endpoints, legal channel availability, antenna alignment, line of sight, Fresnel clearance, outdoor cable quality, grounding, surge protection and a stable mounting structure. Local regulations control permitted frequencies, transmit power and DFS requirements. RouterOS configuration must match the intended bridge or routed topology, and older MikroTik wireless configurations may not transfer directly to the newer Wi-Fi package.
Purchase and deployment journey
Define the application
Clarify whether the link will bridge a LAN, carry internet access, support cameras or provide backup connectivity.
Survey the path
Record coordinates, distance, elevations, obstructions, mounting points and radio interference.
Confirm materials
Determine device quantity, brackets, cable, grounding, surge protection and power backup.
Install and align
Secure equipment, ground it correctly and perform careful signal alignment at both ends.
Configure and validate
Apply secure credentials, correct country settings, radio planning and throughput tests.
Directional antenna performance and alignment
The principal reason to choose the XL model is its integrated 27 dBi antenna. High gain focuses energy toward the remote endpoint, but also narrows the practical alignment window. Small aiming errors can reduce signal quality over long distances. Mounting hardware must remain stable in heat, wind and vibration. Installers should use signal measurements rather than visual aiming alone and recheck the link after clamps are tightened.
Distance figures are conditional. MikroTik indicates that very long links may be feasible in ideal conditions, but reliability varies with weather, line of sight and other factors. A path calculation, expected receive level, noise floor, modulation target and fade margin provide a better basis for decision-making. Critical services may require redundant paths or a wired backup.
Wi-Fi 6 radio efficiency
The 802.11ax radio can improve spectral efficiency and modulation compared with earlier generations when the link budget and interference environment support it. These improvements do not remove outdoor-radio limits. A noisy channel, obstructed path or poor alignment still reduces capacity.
The device supports 802.11a/n/ac/ax operation at 5 GHz and uses two radio chains. WPA3 support is available where the complete configuration and peer support it. Wider channels may increase peak rate but consume more spectrum and may encounter more interference. In crowded areas, a narrower clean channel can deliver a more stable result.
RouterOS v7 management and control
RouterOS v7 gives the radio more flexibility than an unmanaged bridge. Depending on the design, it can bridge, route, enforce firewall policies, manage traffic and support monitoring. That flexibility also means configuration quality matters. Unnecessary services should be disabled, management access restricted, passwords changed and software updates managed.
For production use, save a documented configuration backup, record device identity and management addresses, and establish an update and monitoring process. Where the link carries sensitive traffic, consider segmentation, encrypted applications, logging and change control rather than relying only on wireless authentication.
Ideal business environments
Warehouses and logistics yards
Connect a remote gate, office, dispatch building or security point where a clear rooftop or pole path exists.
Schools and campuses
Bridge separated blocks without opening roads or landscaped areas while maintaining segmentation and access control.
Farms and remote facilities
Extend service to offices and monitoring stations while planning for power quality and lightning exposure.
Construction sites
Create a relocatable link between project offices and existing connectivity with safe mounting and controlled cabling.
Hospitality properties
Join service buildings or remote facilities while separating guest, operational and security networks.
Internet service providers
Deploy within a planned access network where country rules, capacity and subscriber support are defined.
Operational considerations
Monitor signal strength, signal-to-noise ratio, negotiated rates, packet loss, latency, interface errors, CPU load and power stability. Record a healthy baseline after commissioning. Vegetation growth, construction, mast movement, cable water ingress or a new neighbouring radio can change performance even when configuration remains unchanged.
Outdoor Ethernet cable should suit the environment and include correct drip loops and sealing. Grounding should be integrated with the site arrangement by qualified personnel. Surge protection and an uninterruptible power supply may be required where the link supports security or essential operations. Maintenance access at height should also be planned.
Buyer questions before ordering
Check terrain, rooftops, trees, cranes and future obstructions.
Separate business demand from theoretical wireless rate and include overhead.
Confirm whether the remote endpoint already exists and is compatible.
Identify pole size, height, loading, alignment range and access method.
Plan authentication, management access, segmentation, firewall and logging.
Assign monitoring, backup, spares and site-access responsibility.
Procurement checklist
☐ Exact model confirmed
☐ Quantity and paired endpoint
☐ Coordinates and link distance
☐ Mounting heights and path review
☐ Throughput and traffic type
☐ Regulatory profile
☐ Outdoor cable and route
☐ Grounding and surge protection
☐ Mounting accessories
☐ Power and backup
☐ Configuration scope
☐ Installation and testing
☐ Monitoring and support
☐ Destination and timeline
How FourTeck can assist
FourTeck can help convert an outdoor-link requirement into a clear purchasing request. Assistance can include confirming the exact XL model, device quantity, mounting accessories, power and cabling items, and whether installation or RouterOS configuration should be included. Customers should provide site coordinates, photographs, elevations and expected network use so assumptions are visible before procurement.
FourTeck can also coordinate bridge versus routed design, VLAN handling, addressing, basic firewall scope, management access and acceptance testing. Explore business technology products, review installation and configuration services, or contact FourTeck.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the MikroTik LHG XL 5 ax. Supply timing can vary with quantity, vendor lead time and exact product code. Delivery and project coordination can be discussed once the destination and installation scope are confirmed. State whether you need a replacement unit or a complete two-end link, and include accessories, cable, protection, mounting, configuration and commissioning needs.
FourTeck can coordinate requirements across Dubai, Abu Dhabi, Sharjah and Ajman through one combined discussion. Site access, rooftop permissions, working-at-height requirements and travel arrangements can influence service scope. No installation date or radio performance should be assumed until the path and project responsibilities are reviewed.
GCC Availability
Organisations planning long-range MikroTik wireless links elsewhere in the GCC can contact FourTeck for requirement review, model selection, quotation coordination and deployment planning. Projects in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain or Oman may have different frequency rules, import conditions, service arrangements and vendor lead times. Buyers should provide destination country, model, quantity, intended distance, channel plan, accessories and expected schedule. FourTeck can help define configuration, installation and support items for inclusion in the request, but availability and visit scope depend on the country, site access and final bill of materials. Regional enquiries can use the FourTeck Kuwait resource or main FourTeck contact channel.
Africa Availability
FourTeck can assist organisations evaluating the MikroTik LHG XL 5 ax for selected African markets, including East African deployments for campuses, farms, hospitality sites, remote offices and service-provider networks. Availability and fulfilment depend on destination, quantity, local radio rules, power, mounting, shipping and vendor lead time. Buyers should share country, link coordinates, expected bandwidth, quantity, installation expectations and preferred schedule. Configuration and support should be identified separately from supply. Regional resources include FourTeck Kenya, FourTeck Uganda and FourTeck Africa. Inventory, customs outcomes and onsite coverage must be confirmed for each project.
Related options and services
MikroTik LHG 5 ax
The smaller model may suit shorter planned links. Compare link budget and mounting needs.
LHG mount or solidMOUNT
Optional mounting accessories may provide more controlled adjustment.
Outdoor cabling and protection
Use suitable cable, grounding and surge protection for the site.
Wireless link installation
Professional mounting, alignment and acceptance testing can be scoped separately.
RouterOS configuration
Define bridge, routing, VLAN, firewall and monitoring requirements.
Why businesses contact FourTeck
Business buyers need confidence that device quantity, accessories, power, mounting and configuration match the intended link. FourTeck focuses on requirement clarification, bill-of-material guidance, compatibility questions, quotation coordination and deployment planning. Outdoor wireless performance can vary widely because of path geometry, interference and installation quality.
FourTeck can organise the information needed for a useful technical and commercial discussion, including site details, desired throughput, existing switches, VLAN requirements, management preferences, commissioning tests and support expectations. Product supply, installation, configuration and ongoing support should be identified clearly in the quotation.
Frequently asked questions
What is it mainly used for?
Directional outdoor 5 GHz links, especially point-to-point bridges between sites with a clear path.
What is the exact product code?
LHG-5axD-XL.
Does a link require two devices?
Normally yes, unless a compatible endpoint is already installed and verified.
Is long-distance performance guaranteed?
No. It depends on path clearance, interference, weather, alignment and configuration.
Is RouterOS included?
Yes, RouterOS v7 with a Level 3 license is preinstalled.
How is it powered?
Through 12–28 V passive PoE; a 24 V adapter and Gigabit injector are included.
Is mounting hardware included?
The K-LHG kit and hose clamps are included; optional mounts may help precise alignment.
Can FourTeck configure it?
Configuration support can be included according to topology, security and management scope.
What is needed for a quotation?
Quantity, sites, distance, throughput, mounting, accessories, destination and service requirements.
How can I check UAE availability?
Contact FourTeck with the exact model and quantity for current availability and lead time.
Plan the link before purchasing
Share intended locations, distance, traffic, mounting and installation scope. FourTeck can help confirm the model, supporting components and quotation structure.
Reviews
There are no reviews yet.