Power accessory for compatible MikroTik equipment
MikroTik SAW30-240-1200GA in Dubai, UAE
A straightforward replacement or spare power adapter can prevent a small hardware issue from becoming an avoidable network outage. The MikroTik SAW30-240-1200GA supplies 24V DC at up to 1.2A through a straight plug and is offered by the manufacturer in US Type A or EU Type C wall-plug versions. Correct selection depends on the exact MikroTik device, connector, polarity and regional plug requirement.
Before requesting a quote
Share the powered device model.
Confirm EU or US plug preference.
State the required quantity.
Mention whether replacement support is needed.
Direct answer for buyers
The MikroTik SAW30-240-1200GA is a 24V, 1.2A AC-to-DC power adapter with a straight output plug for compatible MikroTik networking devices. It is mainly considered when an original adapter needs replacement, when a support team wants a correctly specified spare, or when a deployment requires additional matching power units. Buyers should confirm the precise powered device, connector dimensions and polarity, expected current draw, wall-plug type and local socket arrangement. A similar-looking adapter is not automatically suitable. FourTeck can review these details and coordinate a quotation, availability check and delivery planning for Dubai and other UAE locations.
What this adapter does
The adapter converts mains AC power into the 24V DC output required by supported equipment. Its rated current is 1.2A, giving a nominal output capacity of approximately 28.8 watts. The straight output plug differentiates this model from MikroTik’s right-angle variant, which has a separate product code. The shape of the plug may influence cable routing in a small cabinet, on a shelf or behind wall-mounted equipment.
This accessory is not a universal substitute for every MikroTik power supply. Even where voltage appears identical, the powered device must accept the connector, polarity and available current. The safest procurement process starts with the device’s exact model code and its power-input requirements.
Who should consider it
The SAW30-240-1200GA may suit IT departments, managed service teams, network integrators, wireless installers, branch-office administrators and procurement teams maintaining compatible MikroTik equipment. It can be useful as a direct replacement for a failed adapter, as a tested spare in a support kit, or as part of a planned deployment where separate power supplies are needed.
It is less suitable for buyers who cannot identify the powered device or who are choosing only by voltage. It should also not be selected where a UK Type G wall plug is mandatory without an approved socket arrangement, because the official product page identifies US and EU variants for this exact model.
Business problems this accessory can help address
Unexpected adapter failure
A damaged or missing power unit can take an otherwise serviceable network device offline. Keeping a verified spare can reduce the delay caused by sourcing an adapter after failure.
Mixed power accessories
Support rooms often accumulate visually similar adapters. Recording exact model, voltage, current, connector and polarity helps technicians avoid unsafe substitutions.
Regional plug mismatch
The manufacturer offers US and EU wall-plug options. Dubai buyers should confirm the intended socket or approved conversion arrangement before purchase.
Incomplete bill of materials
A network project can be delayed when power accessories are omitted. Adding confirmed adapters and required quantities to the bill of materials supports cleaner deployment planning.
Practical capabilities at a glance
Defined DC output
Rated at 24V DC and 1.2A for devices that explicitly accept this power specification.
Straight-plug routing
The straight connector can suit installations where cable exit direction and available clearance are understood.
Regional variants
Official information identifies US Type A and EU Type C wall-plug versions, requiring pre-order confirmation.
Spare-unit planning
A matched spare can support maintenance procedures for compatible equipment without relying on an improvised adapter.
Product-fit decision matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Replacement power adapter | The target device requires 24V DC and can operate within a 1.2A supply rating. | Device model, connector dimensions and polarity. |
| Support-kit spare | Technicians maintain one or more confirmed compatible MikroTik models. | Quantity, labeling and storage process. |
| Dubai office deployment | The chosen plug version fits an approved socket arrangement at the installation site. | EU or US variant and any compliant local adapter requirement. |
| Tight installation space | A straight connector and its cable exit can be accommodated safely. | Clearance, bend radius and strain relief around the powered device. |
Verified product information
| Brand | MikroTik |
|---|---|
| Product code | SAW30-240-1200GA |
| Product type | AC-to-DC power supply accessory |
| Output | 24V DC, 1.2A |
| Nominal output capacity | Approximately 28.8W, calculated from rated voltage and current |
| Output plug style | Straight plug |
| Wall-plug versions | US Type A or EU Type C, subject to selected variant and availability |
| MTBF | Approximately 100,000 hours at 25°C, as stated by the manufacturer |
| Device compatibility | Device dependent; confirm voltage, current requirement, connector and polarity |
| Included components | Power adapter; exact regional version should be confirmed in the quotation |
| Warranty guidance | Confirm current warranty terms with FourTeck at quotation stage |
| UAE availability | Contact FourTeck for current plug-version, quantity and lead-time options |
Compatibility and dependency notice
Power-adapter compatibility is determined by more than the printed voltage. The connected device must support 24V DC input, require no more current than the adapter can safely provide, use the matching connector dimensions and polarity, and be suitable for the adapter’s plug orientation and cable route. Buyers should not assume compatibility from brand name or visual similarity. The regional wall-plug variant is another separate decision. In the UAE, the installation normally uses Type G sockets, while this exact model is officially listed in US Type A and EU Type C versions. Any conversion arrangement should be suitable for the environment and local electrical practice. FourTeck can review the intended deployment but the final bill of materials should identify the exact adapter variant.
A disciplined purchase and replacement journey
Identify the device
Record the exact MikroTik model, serial label details where relevant and the current power-input specification.
Validate electrical fit
Check voltage, current, connector and polarity. Replace a failed adapter only with a fully compatible unit.
Select plug variant
Confirm whether the US or EU version is needed and how it will connect safely at the deployment site.
Confirm quantity and timing
Separate active deployment units from spares and share the preferred delivery schedule with FourTeck.
Test and label
After receipt, test the adapter with the intended device and label stored spares to prevent future mix-ups.
Reliable power matching matters more than appearance
Power adapters are often treated as interchangeable accessories because many use similar black housings and barrel-style connectors. That assumption can create operational and safety problems. Voltage must match the powered equipment’s requirement. The adapter’s current capacity must be sufficient, while the device draws only what it needs. Connector dimensions and polarity must also align. A plug that fits loosely, requires force or has the wrong polarity should not be used.
For procurement teams, the useful control is to catalogue adapters by product code rather than by appearance. Recording “MikroTik SAW30-240-1200GA, 24V 1.2A, straight plug, selected regional wall-plug variant” is substantially clearer than recording “MikroTik charger.” This helps service-desk personnel issue the right spare and allows buyers to reorder the same accessory later.
The manufacturer’s published MTBF figure provides a reliability reference under stated temperature conditions, but it should not be interpreted as a guaranteed service life. Actual operation depends on temperature, ventilation, mains quality, load, handling and installation conditions. A spare strategy remains useful where the connected network device supports an important business function.
Straight-plug design and installation clearance
This model uses a straight output plug. The connector body and cable extend outward from the device’s power socket, so the installation should allow enough clearance to avoid sharp bends and constant side pressure. This is particularly relevant in compact wall boxes, crowded shelves, desktop installations pushed against a wall and small communications cabinets.
MikroTik also lists a separate right-angle version under a different product code. The two should not be confused during quotation or receiving. A right-angle connector can change the cable path, but it is not automatically the preferred choice for every installation. The correct form depends on the location of the device’s power socket, surrounding ports, cabinet depth and service access.
Before buying multiple units, installers can review one deployment position and photograph the available clearance. This simple step can reveal whether a straight plug is appropriate and whether the cable will remain protected from accidental impact. Where the adapter will be disconnected frequently, the service procedure should emphasise gripping the connector rather than pulling the cable.
Spare planning for network support teams
A low-cost accessory can have a high operational impact when it is the only component preventing a router, wireless device or other network unit from powering on. Support teams can reduce this risk by maintaining a controlled spare pool. The pool should contain only verified adapters, each labeled with its model code and compatible device references.
The required spare quantity depends on the installed base, business criticality, site distribution and procurement lead time. A company with a few devices in one Dubai office may need a different approach from an organisation supporting many branches. Spares should also be stored in a clean, dry location with cables protected from tight wrapping, heavy objects and connector damage.
When an adapter is replaced, the technician should check the device for other causes of failure. No power indication may result from the socket, extension strip, device input jack or the device itself rather than the adapter. A basic test process and accurate incident notes can prevent working adapters from being discarded and can reveal recurring mains or environmental issues.
Suitable business environments and use cases
Branch offices
A verified spare can be held locally for compatible MikroTik equipment where waiting for a replacement would interrupt branch connectivity.
Managed service operations
Service teams can standardise labeled adapters in technician kits after confirming which customer devices accept this model.
Wireless deployments
Where supported equipment uses local DC power, the adapter may form part of the planned bill of materials, subject to device-specific verification.
Training and test labs
A controlled set of matching power supplies helps lab managers avoid sharing unsuitable adapters across demonstration devices.
Integrator staging areas
Systems can be powered, configured and tested before dispatch when the accessory is included and matched during staging.
Equipment recovery
A replacement adapter can help determine whether a no-power incident is caused by the original power unit or another component.
Operational and electrical considerations
The adapter should be used in an environment appropriate for indoor electronic equipment unless the full installation provides suitable protection. It should not be exposed to moisture, excessive heat, crushing, damaged sockets or unsupported cable tension. Ventilation around the adapter and connected device should remain unobstructed. The published MTBF reference applies at 25°C, which reinforces the importance of temperature when comparing laboratory figures with real operating conditions.
Power quality also matters. Sites with unstable mains, frequent interruptions or electrical noise may require broader power-protection planning. A small adapter alone does not provide business continuity. Where the powered device supports critical connectivity, buyers may need to consider a suitable UPS, surge protection, redundant network design or a documented replacement procedure. These requirements are separate from the adapter and should be evaluated for the site.
The wall-plug variant must fit the intended socket arrangement. In Dubai and across the UAE, buyers should identify how an EU Type C or US Type A version will be connected to the local outlet and ensure any conversion accessory is appropriate. FourTeck can include plug-variant confirmation in the quotation process so the receiving team knows what to expect.
Questions to resolve before ordering
Which device will it power?
Provide the complete MikroTik model rather than a general description such as router or access point.
What does the device label specify?
Confirm accepted input voltage, current requirement, polarity and any limits stated by the manufacturer.
Which wall-plug version is required?
Choose between available US and EU variants and account for the UAE socket arrangement.
Is the straight plug suitable?
Review cabinet depth, nearby ports, cable route and physical protection around the power socket.
How many units are required?
Separate immediate replacements, new deployment quantities and maintenance spares.
Is technical assistance needed?
State whether FourTeck should assist with compatibility review, device testing or deployment planning.
Procurement checklist
✓ Exact powered-device model recorded
✓ SAW30-240-1200GA product code confirmed
✓ 24V DC input requirement verified
✓ Required current and connector checked
✓ Connector polarity confirmed
✓ Straight-plug clearance reviewed
✓ US or EU wall-plug variant selected
✓ UAE socket arrangement considered
✓ Deployment and spare quantities separated
✓ Required delivery destination provided
✓ Warranty terms requested in quotation
✓ Testing or replacement support identified
Providing these details with the enquiry helps FourTeck prepare a more accurate quotation and reduces the chance of ordering an unsuitable adapter variant.
How FourTeck can assist
FourTeck can help buyers turn a brief accessory request into a clearly specified order. The first step is requirement clarification: the sales or technical team can review the connected MikroTik device, the adapter model being replaced, the desired plug variant and the quantity. Where the request forms part of a larger networking project, the adapter can be considered alongside the main equipment, mounting, cabling, power protection and configuration scope.
For replacement cases, buyers can share photographs of the device label and existing adapter label. These references help distinguish the SAW30-240-1200GA from visually similar power units and from MikroTik’s right-angle version. FourTeck can then coordinate product quotation and current availability guidance. Availability may depend on the exact variant, quantity, vendor lead time and destination.
Additional assistance can include delivery coordination, installation planning and broader MikroTik network support where separately agreed. Browse the FourTeck technology product range, review available networking and security services, or send the requirement through the FourTeck contact page.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the MikroTik SAW30-240-1200GA. The result may vary according to the required US or EU plug variant, order quantity, supplier position and vendor lead time. A quotation should identify the exact product code and regional plug version rather than describing only a generic 24V adapter. Delivery and project coordination can be discussed after the requirement is confirmed.
For organisations operating across Dubai, Abu Dhabi, Sharjah and Ajman, FourTeck can coordinate a combined requirement covering replacement units, project quantities and maintenance spares. Buyers should share each deployment location when socket arrangements or delivery points differ. Installation and configuration work is not automatically included with the accessory and should be requested as a separate scope where required. For broader company information, visit About FourTeck.
GCC Availability
FourTeck can assist organisations planning MikroTik accessory requirements across GCC markets, including the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain and Oman. For the SAW30-240-1200GA, the enquiry should identify the destination country, exact powered-device model, quantity, preferred plug version and required schedule. This matters because regional socket arrangements, supply channels and lead times may differ. FourTeck can support requirement review, quotation coordination, delivery planning and discussion of any related installation or network-support scope. Product availability, service visits, project scope and delivery timing remain dependent on country, quantity, supplier position and the confirmed bill of materials. Buyers should not assume that one plug variant or fulfillment method applies across every GCC location. Kuwait-based enquiries can also review FourTeck technology support in Kuwait and submit the exact requirement for current guidance.
Africa Availability
FourTeck can help businesses, integrators and project teams assess MikroTik power-accessory needs for deployments in Africa. The review can cover the exact adapter model, device compatibility, regional wall-plug arrangement, required quantity, delivery destination and whether the units are for active deployment or spares. Fulfilment may depend on the destination, product variant, vendor lead time, shipping plan, local power requirements and the wider project scope. Buyers should share the country, target MikroTik device, preferred schedule and any installation or support expectations so the quotation can be prepared around the actual requirement. FourTeck does not treat availability or delivery as identical across the continent. Organisations can explore FourTeck Africa technology services, Kenya project assistance or Uganda technology support for relevant regional enquiries.
Related products and services to consider
Right-angle MikroTik power adapter
Consider the separate SAW30-240-1200GR2A only where its connector orientation and full compatibility are confirmed.
MikroTik device replacement
Where the powered equipment is also faulty or obsolete, review the exact replacement device and complete accessory list.
UPS and surge protection
For business-critical connectivity, evaluate appropriate power protection separately from the adapter itself.
Network installation support
Request assistance with mounting, cabling, power checks, configuration and handover as a defined project scope.
Why businesses contact FourTeck
Buyers often contact FourTeck when the product code is known but the surrounding procurement details are not. FourTeck can help clarify whether the request is for a direct replacement, a project accessory or a spare; identify the required plug version; review basic compatibility information; and coordinate a quotation based on quantity and destination. This practical process is especially useful for small accessories because an incorrect unit can waste more technical time than its purchase value suggests.
FourTeck can also place the adapter request in the context of the wider network. Where repeated failures are occurring, the discussion may include socket condition, UPS requirements, cabinet temperature or device health. Where a rollout is planned, the quotation can identify accessory quantities and any separately requested staging, installation or configuration work. The objective is a clear bill of materials and a realistic deployment plan, without assuming stock, warranty or delivery details before they are confirmed.
Frequently asked questions
What is the MikroTik SAW30-240-1200GA?
It is a MikroTik power adapter rated for 24V DC output at 1.2A and fitted with a straight output plug. The manufacturer lists US Type A and EU Type C wall-plug versions.
Can it power any MikroTik device that uses 24V?
No. Voltage alone is not enough to establish compatibility. The device’s required current, connector dimensions, polarity and approved input range must also match.
What is the difference between GA and GR2A versions?
The SAW30-240-1200GA is described with a straight plug, while the SAW30-240-1200GR2A is a separate right-angle-plug model. Confirm the exact product code required.
Which wall-plug type should I order for Dubai?
The exact model is listed in US Type A and EU Type C variants. Tell FourTeck how the adapter will connect at the UAE site so the appropriate option can be discussed.
Is the output power approximately 29 watts?
The 24V and 1.2A rating gives a nominal calculated capacity of 28.8W, commonly rounded to about 29W. Device compatibility still requires full input verification.
Does the MTBF figure guarantee operating life?
No. MikroTik states an approximate MTBF of 100,000 hours at 25°C, but this is a statistical reliability reference, not a guaranteed lifespan for an individual adapter.
Can FourTeck help verify compatibility?
Yes. Share the exact device model and, where possible, photographs of the device and existing adapter labels for review before quotation.
Is the adapter currently available in the UAE?
Availability must be confirmed for the required plug variant and quantity. It may depend on supplier position and vendor lead time.
What information is needed for a quotation?
Provide the product code, powered-device model, quantity, desired plug version, delivery location and preferred schedule, plus any testing or installation assistance needed.
Can installation or network support be included?
Yes, where required, but it should be requested and defined separately in the quotation. The adapter purchase alone does not automatically include technical services.
Confirm the adapter before placing the order
Send FourTeck the exact MikroTik device model, required quantity and preferred wall-plug version. The team can review the request, confirm current UAE availability and prepare a quotation that identifies the correct SAW30-240-1200GA variant and any separately required support.
