Focused 5 GHz outdoor connectivity
Ubiquiti airMAX IsoStation 5AC IS-5AC in Dubai, UAE
The IsoStation 5AC is a compact outdoor airMAX radio built for organisations that need a controlled wireless beam, Gigabit Ethernet connectivity and practical deployment flexibility. Its included 45-degree horn helps network designers concentrate coverage toward the intended service area rather than spreading radio energy unnecessarily.
Planning a wireless link?
Share the two site locations, expected distance, mounting height, capacity target and required quantity for a more useful quotation.
IS-5AC
5 GHz airMAX AC
14 dBi, 45° horn
24V passive PoE
Direct answer for buyers
The Ubiquiti airMAX IsoStation 5AC IS-5AC is an outdoor wireless bridge with a focused horn antenna, intended for 5 GHz airMAX links rather than ordinary indoor Wi-Fi coverage. It is mainly used to connect buildings, provide client connectivity in a point-to-multipoint network or establish a directional data path where cabling is impractical. It is worth considering for business compounds, warehouses, hospitality properties, campuses, surveillance backhaul and service-provider access networks. Before proceeding, confirm clear line of sight, link distance, expected throughput, channel availability, regional frequency compliance, mounting conditions, compatible remote equipment and the correct antenna beamwidth.
What the IS-5AC does
The IS-5AC sends and receives network traffic over a focused 5 GHz wireless path. Its default horn antenna narrows the coverage area to 45 degrees, which can help reduce unwanted reception from directions outside the intended sector. The radio can operate as an access point or station, so it can be used at either side of a suitable airMAX deployment depending on the network design.
The device connects to the wired network through one Gigabit Ethernet port and receives power through the same cable using 24V passive PoE. This reduces the number of cables running to the outdoor mounting position, although installers must still provide suitable surge protection, grounding, weather-resistant cabling and a safe mounting arrangement.
Who should consider it
The product may suit IT teams, wireless internet providers, system integrators and property operators that need a compact directional radio with a replaceable horn arrangement. It is especially relevant when a broad omnidirectional signal would create avoidable interference or when the planned service area can be covered by a defined sector.
It should not be selected solely because it is a 5 GHz radio. Buyers need to evaluate the complete link budget, regulatory power limits, physical obstructions, Fresnel-zone clearance, weather exposure, mounting stability and the capabilities of the device at the other end. A proper survey is advisable for critical links.
Business challenges the IsoStation 5AC can help address
Connecting separate buildings
Where trenching fibre or copper is expensive, disruptive or restricted, a properly engineered wireless bridge can extend network connectivity between facilities. The IS-5AC may form part of that bridge when distance, visibility and capacity requirements fit the radio design.
Reducing sector overlap
The focused horn pattern can help planners direct coverage toward a defined zone. This may be useful in dense sites where several radios operate nearby, although careful channel planning and physical separation remain important.
Supporting outdoor edge locations
Remote gates, warehouses, cameras, kiosks or temporary work areas may need network access without a new cable route. The IS-5AC can provide the wireless portion of such a design when power, mounting and environmental requirements are addressed.
Simplifying field management
A separate 2.4 GHz management radio supports local setup access during installation. This can make alignment and commissioning more convenient, but management security, credentials and access policies must still be configured properly.
Core capabilities in practical terms
Focused antenna pattern
The included 14 dBi horn has a 45-degree beamwidth, supporting deliberate coverage design rather than broad-area distribution.
Gigabit wired interface
One GbE RJ45 port carries network traffic and passive PoE power to the outdoor radio.
airMAX AC operation
The radio supports Ubiquiti airMAX AC mode, with performance dependent on channel width, signal quality, interference and peer equipment.
Outdoor operating range
The published operating temperature range is -40 to 70°C with 5 to 95 percent noncondensing humidity, subject to correct installation.
Product-fit matrix
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Building-to-building link | There is clear line of sight and the planned link budget supports the distance. | Distance, mounting height, obstructions, capacity target and matching radio. |
| Focused client sector | A 45-degree default horn matches the intended coverage area. | Number and position of clients, channel plan and alternative horn requirement. |
| Outdoor installation | A stable pole, protected cable route and proper grounding can be provided. | Wind exposure, surge protection, cable length and access for maintenance. |
| Managed airMAX network | The surrounding design uses compatible Ubiquiti airMAX equipment. | Firmware alignment, management method and interoperability expectations. |
Verified technical information
| Brand | Ubiquiti |
|---|---|
| Product | airMAX IsoStation 5AC |
| Model | IS-5AC |
| Product type | Outdoor 5 GHz airMAX wireless bridge/radio |
| Antenna gain | 14 dBi with default horn |
| Antenna beamwidth | 45 degrees with default horn |
| Network interface | One Gigabit Ethernet RJ45 port |
| Power method | 24V passive PoE, two-pair |
| Included power supply | 24V, 0.5A Gigabit PoE adapter |
| Supported voltage | 20–27V DC |
| Maximum power consumption | 8.5W |
| Operating modes | Access Point and Station |
| 5 GHz frequency range | 5150–5875 MHz worldwide range; permitted channels are region dependent |
| Management radio | 2.4 GHz, 2412–2472 MHz worldwide range |
| Dimensions | Without horn: 131 × 131 × 65 mm; with horn: 174 × 174 × 150 mm |
| Weight | Without horn: 408.2 g; with horn: 725.7 g |
| Mounting | Pole mount included |
| Wind survivability | 200 km/h |
| Operating temperature | -40 to 70°C |
| Operating humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC and IC; regional compliance must be confirmed for the destination |
Compatibility and dependency notice
Wireless performance is configuration dependent. Channel width, transmit power, local noise, antenna alignment, distance, Fresnel-zone clearance, firmware, modulation rate, Ethernet quality and the radio at the far end all influence usable throughput. The published worldwide frequency range does not mean every frequency is legal in every country. UAE regulatory rules, permitted channels and power limits must be followed. The included PoE adapter uses passive PoE, so it should not be connected to equipment that expects a different power standard without confirming compatibility.
A practical purchase and deployment journey
Define the connection
Identify both endpoints, distance, expected users or devices, target capacity and whether the link is point-to-point or part of a point-to-multipoint network.
Survey the radio path
Check physical visibility, mounting height, obstructions, reflective surfaces, nearby radios and cable routes. A visual line of sight alone may not provide adequate Fresnel clearance.
Validate the bill of materials
Confirm radios, horns, poles or brackets, outdoor-rated Ethernet cable, grounding, surge protection, PoE arrangements, network switches and any installation accessories.
Configure and align
Set the correct country, frequency, channel width, security, management credentials and network parameters. Align both ends using measured signal quality rather than visual estimation alone.
Test and document
Verify throughput, latency, packet loss, stability and failover expectations. Record mounting details, IP addresses, firmware, channel plan, credentials process and maintenance access.
Focused beam design and interference control
The defining design feature of the IsoStation 5AC is not simply that it operates at 5 GHz. Its practical value comes from pairing the radio with an interchangeable horn antenna. The included 45-degree horn creates a more deliberate coverage footprint than a typical wide-angle panel. In an access network, this can allow several sectors to be arranged around a site with less overlap. In a point-to-point application, it can help concentrate the radio path toward the far endpoint.
A narrower pattern does not automatically eliminate interference. The radio still receives signals within its beam and may also experience side-lobe energy, reflections or noise entering through the installation environment. The installer should measure the spectrum, select legal channels, avoid unnecessary transmit power and align the antenna accurately. Using maximum power can sometimes worsen network performance by creating excess noise or unbalanced links. The correct objective is a stable link with sufficient signal margin, not the highest possible transmit setting.
Beamwidth selection should also reflect the physical layout. A 45-degree horn may be appropriate for a small client sector, a compound, a row of buildings or a focused access area. A different horn may be needed where the required coverage is narrower or wider. Buyers should confirm compatible horn options and should not assume that changing the antenna leaves every regulatory and performance parameter unchanged.
airMAX AC performance and link quality
The IS-5AC supports airMAX AC mode and common network services such as bridging, routing, DHCP, SNMP, SSH and web-based management. These capabilities give integrators flexibility when fitting the radio into a broader network. Most business deployments use the wireless link as a transparent bridge, but routing may be useful in selected designs. The correct mode should follow the IP plan, security model and operational responsibility for the connected sites.
Actual capacity depends on radio conditions. Channel width is a major factor: wider channels can provide more peak capacity but occupy more spectrum and may be more vulnerable to interference. Narrower channels can be useful in congested environments or where link margin is limited. The IS-5AC supports 30, 50 and 60 MHz channels alongside other configuration choices, yet the most suitable setting must be tested in the intended location.
Signal strength is only one part of link quality. Buyers and installers should also review noise floor, signal-to-noise ratio, modulation rate, packet retransmissions, Ethernet negotiation and traffic patterns. A radio showing a strong signal may still perform poorly if the channel is busy or if one side of the link has a cabling fault. For operational networks, monitoring should include availability, throughput trends and error rates rather than relying on a one-time installation reading.
Outdoor installation, power and serviceability
The IsoStation 5AC is pole mounted and receives power through a 24V passive PoE adapter. Passive PoE simplifies the cable run, but it requires careful handling because it is not the same as standards-based automatic PoE negotiation. Installers should label injectors and cables, verify polarity and voltage, and avoid connecting the passive output to incompatible devices. Where a managed switch or central PoE system is preferred, the design may require an appropriate adapter or separate power arrangement.
Outdoor Ethernet cable should be UV resistant and suitable for the route. Shielding and grounding practices should follow the site design and applicable electrical standards. Surge protection is especially important for rooftop, mast and open-area installations. The included pole mount must be attached to a structure that can tolerate expected wind loading, and the cable should include a drip loop and strain relief. Access for future maintenance should be considered before the final mounting height is chosen.
The published environmental range supports demanding outdoor use, but it does not remove the need for correct installation. High ambient temperature, direct solar exposure, enclosed cabinets, salt air, dust, condensation and lightning risk can all influence service life. A project quotation should therefore separate product supply from mounting hardware, cabling, access equipment, grounding work, commissioning and ongoing support.
Ideal business environments and use cases
Warehouses and logistics yards
Link a remote warehouse, gatehouse, loading zone or operations cabin to the main network where a suitable line of sight exists. Capacity planning should consider cameras, handheld devices, telephony and business applications sharing the link.
Hospitality and property sites
Extend connectivity between buildings, service areas or staff facilities without disturbing landscaped or paved areas. Mounting permission, visual impact and local interference should be reviewed early.
Surveillance backhaul
Carry IP camera traffic from a remote cluster to the recording network. The design must calculate combined camera bit rates, burst traffic, latency and resilience rather than selecting a radio only by distance.
Campus connectivity
Connect administration, classroom, clinic, workshop or accommodation buildings. VLAN design, network security and future expansion should be included in the planning process.
Service-provider access
Use the radio as an access point or station in a compatible airMAX network. Subscriber density, contention, sector loading, channel reuse and customer equipment standards need careful engineering.
Temporary project locations
Provide connectivity to construction compounds, event areas or temporary offices where cabling is not practical. The mounting and power design should still be robust, secure and documented.
Integration and operational considerations
A wireless bridge becomes part of the business network, so it should be treated like any other managed infrastructure. Place management interfaces on an appropriate VLAN, use unique credentials, restrict administrative access and maintain an approved firmware process. Consider how the link will be monitored and who will receive alerts if signal quality or availability changes.
Network loops can occur if the wireless bridge is added alongside an existing wired path without proper spanning-tree design. Likewise, broadcast traffic, multicast video and large file transfers may consume more link capacity than expected. Quality-of-service policies can prioritise important traffic, but they cannot create capacity that the radio path does not have. Confirm whether the link carries internet access, voice, cameras, operational systems or guest traffic and design segmentation accordingly.
For critical applications, discuss redundancy. A second wireless path, fibre backup, cellular connection or alternate route may be necessary. The IS-5AC itself should not be described as a complete high-availability solution. Resilience depends on the entire design, including power, switching, routing, mounting, spectrum and remote-site equipment.
Buyer questions to resolve before ordering
Provide coordinates or a measured path so the radio design can be assessed accurately.
Include trees, cranes, future construction and Fresnel-zone clearance, not only visible obstructions.
Estimate average and peak usage for cameras, voice, users, backups and business systems.
Confirm model, firmware and intended airMAX mode to avoid unsupported assumptions.
A narrower or wider compatible antenna may be more suitable for the physical layout.
Define mounting, cabling, configuration, testing, documentation and after-sales responsibilities.
Procurement checklist
☐ Exact IS-5AC model and regional version
☐ Required quantity and spare-unit policy
☐ Link endpoints and deployment distance
☐ Point-to-point or point-to-multipoint role
☐ Desired throughput and latency expectations
☐ Clear line of sight and mounting height
☐ Horn beamwidth and antenna arrangement
☐ 24V passive PoE compatibility
☐ Outdoor cable, grounding and surge protection
☐ Frequency and channel compliance
☐ Installation and access-equipment scope
☐ Configuration, testing and documentation scope
☐ Monitoring and support responsibility
☐ Current availability, lead time and warranty terms
How FourTeck can assist
FourTeck can help buyers move from a product request to a usable bill of materials. Assistance can include reviewing the proposed link, clarifying whether the IS-5AC fits the intended role, checking the required quantity, discussing compatible radios and horns, and separating product supply from installation services. This is useful when procurement teams have a model number but still need technical confirmation from the project owner.
For deployment planning, FourTeck can coordinate discussions around mounting, cabling, power, surge protection, configuration, alignment, testing and handover. The exact service scope depends on the site and should be stated in the quotation. Buyers can review additional network installation and support services, browse business technology products, or contact FourTeck for a tailored quotation.
UAE availability and support guidance
Contact FourTeck to confirm current UAE availability for the Ubiquiti IS-5AC. Availability may depend on quantity, regional version, vendor lead time and the exact accessories included in the requirement. A useful request should state the number of radios, intended deployment role, preferred project date and whether installation or configuration support is required. Delivery and project coordination can be discussed after the model and scope are confirmed.
For projects across Dubai, Abu Dhabi, Sharjah and Ajman, FourTeck can coordinate requirement review, quotation preparation and suitable implementation discussions. Site visits, installation dates and support arrangements depend on the location and agreed scope and should be confirmed in writing. Buyers should not assume that the online product price includes masts, access equipment, outdoor cabling, civil work, configuration or ongoing maintenance.
GCC availability
Organisations planning airMAX wireless links across the GCC can contact FourTeck for requirement review and quotation coordination. Projects in the United Arab Emirates, Saudi Arabia, Kuwait, Qatar, Bahrain or Oman may differ in permitted frequency settings, regional product versions, shipping arrangements and service scope. For an IS-5AC request, share the destination country, exact quantity, link purpose, site locations, required accessories and expected deployment schedule. FourTeck can help clarify model selection, bill-of-material considerations, configuration requirements and installation planning, but availability and delivery schedules remain dependent on the vendor channel, quantity and destination. Country-specific regulatory requirements must be checked before configuration. Where a project includes several locations, provide a site schedule and identify whether the work requires product supply only, remote guidance, commissioning support or coordinated field installation. For Kuwait-related requirements, buyers may also review FourTeck technology support in Kuwait.
Africa availability
FourTeck can assist organisations evaluating the Ubiquiti IsoStation 5AC for projects in Africa, including selected requirements in East Africa and other regional markets. The correct procurement approach depends on the destination, regional radio rules, model version, quantity, power arrangements, mounting conditions, shipping method and local installation capability. Buyers should share the country, site environment, link distance, quantity, required accessories and preferred deployment date so the request can be reviewed properly. Availability should be confirmed for every order and should not be inferred from another market. For multi-site deployments, include a location list, network diagram and support expectation. FourTeck can discuss product selection, configuration scope, remote planning, renewal or support needs and regional procurement coordination. Buyers can explore FourTeck services across Africa, as well as dedicated information for Kenya technology projects and Uganda business technology requirements.
Related products and services to evaluate
Compatible airMAX peer radio
Confirm the exact device planned at the opposite endpoint and verify supported mode, frequency, channel width and firmware.
Alternative horn antennas
Review compatible beamwidth options when the included 45-degree horn does not match the intended sector or path.
Outdoor cabling and surge protection
Specify UV-resistant Ethernet cable, grounding and protection appropriate for the mounting environment.
Wireless link survey
Assess line of sight, Fresnel clearance, interference, mounting positions and expected capacity before final purchase.
Installation and alignment
Include physical mounting, safe access, cable termination, configuration, alignment and link testing where required.
Network integration support
Plan VLANs, IP addressing, monitoring, security controls and traffic priorities for the completed wireless bridge.
Why businesses contact FourTeck
Businesses often need more than a model number. FourTeck can help translate the intended wireless link into questions that procurement and technical teams can answer: which radio belongs at each endpoint, whether the default antenna fits, how many units are required, what accessories are missing, and whether configuration or installation services should be included. This reduces the risk of receiving hardware that does not match the deployment plan.
The assistance is practical rather than based on unsupported promises. FourTeck can coordinate quotation details, discuss compatibility, review the requested bill of materials and help define service boundaries. Warranty terms, lead time, availability and regional version should be confirmed in the final quotation. For company information, visit about FourTeck.
Frequently asked questions
What is the Ubiquiti IsoStation 5AC used for?
It is used for focused outdoor 5 GHz airMAX wireless links, including point-to-point building links and point-to-multipoint access networks. Suitability depends on distance, visibility, spectrum conditions and the equipment at the other end.
Does the IS-5AC provide normal office Wi-Fi?
It is primarily an outdoor airMAX bridge radio, not a general indoor Wi-Fi access point for phones and laptops. A separate Wi-Fi system is normally used for local user access.
What antenna is included?
The standard product is specified with a 14 dBi horn antenna and 45-degree beamwidth. Confirm the exact package and regional version in the quotation.
Can the horn antenna be changed?
The IsoStation platform is designed around interchangeable horn antennas. Compatibility and the correct beamwidth should be confirmed for the proposed design before ordering alternatives.
How is the radio powered?
It uses 24V passive PoE and includes a 24V, 0.5A Gigabit PoE adapter according to Ubiquiti specifications. Passive PoE compatibility must be checked carefully.
What throughput should a buyer expect?
Usable throughput varies with channel width, signal quality, interference, distance, alignment, firmware and peer equipment. A site-specific design and test are more reliable than using a single headline figure.
Can it be installed on a rooftop or pole?
Pole mounting hardware is included. The supporting structure, grounding, surge protection, outdoor cable and safe access arrangements remain part of the installation design.
Is a software license required?
The core radio operation is not presented as a subscription license product. Any management-platform requirements, support services or optional software arrangements should be confirmed for the project.
How can I confirm Dubai availability?
Send FourTeck the model, quantity, required date, destination and service scope. Availability, lead time and warranty guidance will be confirmed through the quotation process.
What information is needed for an accurate quote?
Provide quantity, both site locations, distance, intended application, required capacity, mounting conditions, peer equipment, accessory needs and whether survey, installation, configuration or support is required.
Confirm whether the IS-5AC fits your link
Share the site distance, deployment role, quantity and installation scope. FourTeck can review the request and prepare a product or project quotation for Dubai and the UAE.
Reviews
There are no reviews yet.