HPE Aruba Networking CX 6000 24-Port PoE Switch Dubai
A managed Gigabit access switch for organisations that need 24 Class 4 PoE ports, four integrated 1GbE SFP uplinks and straightforward AOS-CX management at the network edge. The current HPE product identifier for this configuration is R8N87B.
Direct answer: what is the CX 6000 24-port PoE model?
The HPE Aruba Networking CX 6000 24-port PoE switch, current model R8N87B, is a fully managed Layer 2 access switch built for business networks that need Gigabit wired connectivity and PoE power at the edge. It is mainly suited to connecting users, wireless access points, IP phones and compatible IoT devices in branches, retail locations and midsize offices. The most important point to confirm before purchase is whether 24 access ports, a 370W PoE budget and four 1GbE SFP uplinks are sufficient for the planned design. FourTeck can help assess endpoint count, PoE consumption, SFP requirements, rack installation, management preference, compatibility and quotation scope before an order is placed.
What the HPE Aruba CX 6000 24-Port PoE Switch Does
R8N87B sits at the wired access layer of a network. Its 24 copper Gigabit Ethernet ports can carry user and device traffic while also supplying IEEE 802.3af or 802.3at power to compatible endpoints. This is useful where organisations want a single Ethernet cable to provide both connectivity and electrical power to devices such as access points, phones and cameras, subject to each device’s power requirement and the switch’s total 370W budget.
Four built-in 1GbE SFP ports provide fibre or compatible copper-transceiver uplink options. The uplink design should be checked carefully: this CX 6000 model is a 1GbE access switch, so projects requiring multi-gigabit access or 10GbE uplinks should evaluate a higher-capability switch family rather than assuming that an SFP+ transceiver can convert these 1GbE SFP ports into 10GbE interfaces.
Verified Specifications for R8N87B
| Manufacturer | HPE Aruba Networking |
|---|---|
| Current HPE product identifier | R8N87B |
| Product family | HPE Aruba Networking CX 6000 Switch Series |
| Product type | Managed Layer 2 access switch with static routing support |
| Access ports | 24 x 10/100/1000BASE-T Class 4 PoE ports |
| PoE standards | IEEE 802.3af and IEEE 802.3at |
| PoE budget | Up to 370W Class 4 PoE/PoE+, up to 30W per supported port subject to total budget |
| Uplinks | 4 x 1GbE SFP ports |
| Console / host | 1 x USB-C console port; 1 x USB Type-A host port |
| Switching capacity | 56 Gbps |
| Throughput | 41.6 Mpps |
| Latency | 1.5 microseconds at 1Gbps, LIFO 64-byte packets |
| Memory / storage | 2 GB DDR3; 8 GB eMMC |
| Packet buffer | 12.38 MB |
| Cooling | Fixed fans |
| Power supply | Fixed internal power supply |
| Dimensions | 4.39 cm H x 44.25 cm W x 26.82 cm D |
| Configuration weight | 3.68 kg |
| Form factor | 1U rack-mount class; mounting requirements should be confirmed for the project |
Is This 24-Port CX 6000 the Right Fit?
| Requirement | Suitable when | Confirm before ordering |
|---|---|---|
| Powered edge devices | Your planned endpoints fit within 24 ports and the 370W PoE budget. | Per-device wattage, peak consumption and spare capacity. |
| Uplink connectivity | 1GbE SFP uplinks meet the access-layer design. | Fibre type, distance, transceiver model and upstream port compatibility. |
| Management | Local AOS-CX Web GUI/CLI or Aruba Central fits operations. | Whether a separate Aruba Central subscription is required. |
| Access-layer role | Layer 2 switching with static routing is adequate. | Need for advanced routing, stacking, higher-speed uplinks or additional redundancy. |
370W PoE for the access edge
The 370W budget gives the switch useful headroom for mixed PoE endpoints, but the total must be planned rather than estimated from port count alone. A deployment with 24 low-power phones has a different requirement from one populated with higher-power wireless access points or cameras. Record the maximum supported draw of each powered device and retain design margin.
Four dedicated 1GbE SFP uplinks
The four SFP ports can be used to connect the access switch to distribution or core infrastructure using supported 1GbE optics or other compatible SFP choices. Transceiver type, fibre standard, connector, distance and the upstream switch interface must be confirmed as part of the bill of materials.
AOS-CX management consistency
The CX 6000 runs the AOS-CX operating system used across the HPE Aruba Networking CX portfolio. Administrators can work through the Web GUI or command-line interface, while Aruba Central can be considered when centralised cloud or on-premises management is part of the operating model.
Licensing and Subscription Requirements
A subscription is not required simply to enable the embedded switch software and use the CX 6000 as a locally managed switch. HPE documents local management options such as Web GUI and CLI for the family.
HPE Aruba Networking Central is a separate management service with subscription options. If Central is required for cloud-based or on-premises central management, the correct subscription class and term should be confirmed before quotation. Do not assume that a Central subscription is included with the hardware unless it is explicitly listed in the commercial offer.
Compatibility and Integration Checks
- Powered devices: Confirm that endpoint PoE requirements are compatible with IEEE 802.3af or 802.3at and fit the available total budget.
- SFP modules: Select transceivers that are supported for the CX 6000 and match fibre type, wavelength, link distance and the upstream interface.
- Cabling: Confirm copper cabling category and condition for Gigabit Ethernet and PoE delivery.
- Management platform: Decide whether local management is sufficient or whether Aruba Central subscriptions should be added.
- Rack and power: Check rack depth, mounting hardware, power outlets, UPS capacity, airflow and cable-management requirements.
- Network design: Confirm VLAN, QoS, ACL, static routing and uplink requirements before configuration begins.
Where R8N87B Fits in the CX 6000 Family
The 24-port 370W PoE model is positioned between smaller compact CX 6000 models and 48-port variants. It is a practical choice when a site needs a full rack-width access switch with 24 powered Gigabit ports but does not require the port density of a 48-port unit.
A smaller CX 6000 model should be evaluated for low-density sites where 24 ports would be unnecessary. A 48-port CX 6000 may be more appropriate where endpoint growth would otherwise require a second access switch. If the project needs faster uplinks, multi-gigabit edge ports, advanced Layer 3 functions, switch stacking or a different resiliency model, a higher HPE Aruba Networking CX family should be compared instead of overextending the CX 6000 design.
Deployment and Installation Considerations
The 24-port PoE unit uses fixed fans and is intended for standard equipment-room or communications-rack deployment rather than fanless desk-side operation. Allow for front and rear cabling, airflow, suitable rack space and dependable power. If the switch will feed many PoE devices, UPS sizing should account for the switch itself as well as the intended PoE load.
Before commissioning, define VLANs, uplink configuration, management IP addressing, administrator access, access-control requirements, QoS policies, PoE priorities and monitoring. This reduces the risk of installing the hardware before the logical network design and device power plan are ready.
Buyer Questions Before Ordering
Does the CX 6000 24-port model require a subscription?
No subscription is required to enable the embedded switch software for local operation. Aruba Central management is separate and uses subscription options, so include it only when the selected management design requires it.
Can all 24 ports provide PoE at the same time?
The ports support Class 4 PoE, but the combined powered-device demand must remain within the switch’s 370W PoE budget. Calculate real endpoint requirements rather than multiplying the maximum per-port value by 24.
Are the four uplinks 10GbE?
No. The R8N87B configuration provides four 1GbE SFP uplink ports. Projects that require 10GbE uplinks should evaluate another switch family or model with the required interface speed.
What information improves quotation accuracy?
Provide quantity, required SFPs, fibre type and distance, powered-device count and wattage, rack requirements, preferred management method, subscription term if applicable, installation scope and any configuration requirements.
Procurement Checklist for a UAE CX 6000 Project
- Confirm current HPE identifier R8N87B or required regional/TAA variant.
- Confirm switch quantity and expected port growth.
- List every planned PoE endpoint and power requirement.
- Confirm total PoE demand against the 370W budget.
- Specify SFP type, fibre type and uplink distance.
- Confirm upstream switch interface compatibility.
- Decide between local management and Aruba Central.
- Add the correct Central subscription when required.
- Confirm rack, power, UPS and airflow requirements.
- Define VLAN, QoS, ACL and static-routing scope.
- Confirm installation, configuration and testing requirements.
- Confirm current UAE availability, lead time and commercial terms.
How FourTeck Can Assist
FourTeck can help convert a switch request into a more complete bill of materials by reviewing port count, PoE load, uplink optics, cabling, management preference and deployment scope. This can be particularly useful when the switch must integrate with existing wireless access points, IP telephony, surveillance or an established distribution layer.
For related infrastructure, browse FourTeck technology products, review installation and configuration services, or contact FourTeck for product sizing and quotation.
UAE Availability and Quotation Guidance
Contact FourTeck to confirm current UAE availability for the HPE Aruba Networking CX 6000 24-port PoE switch. Availability can depend on the exact model revision, quantity, vendor lead time, required SFPs and any management subscriptions. Delivery, installation and configuration should be included in the quotation only when those services are required for the project.
Related Options to Evaluate
- CX 6000 24-port non-PoE model: Consider when edge devices do not require switch-delivered power.
- CX 6000 48-port models: Consider when higher port density is needed at the same access layer.
- CX 6000 compact 8-port or 12-port models: Consider for smaller branches and space-constrained sites.
- HPE Aruba Networking Central subscriptions: Evaluate when centralised management is required.
- Higher CX switch families: Compare when the design needs faster uplinks, advanced Layer 3 capabilities, stacking or additional resiliency.
Frequently Asked Questions
What is the current model number?
HPE’s current documentation lists the 24-port Class 4 PoE, four-SFP, 370W CX 6000 configuration as R8N87B.
How much PoE power is available?
The switch provides a total PoE budget of up to 370W and supports IEEE 802.3af and 802.3at Class 4 PoE/PoE+.
What uplinks are built in?
R8N87B includes four 1GbE SFP uplink ports. Compatible SFP transceivers should be selected according to media and distance.
Can it be managed without Aruba Central?
Yes. The CX 6000 family supports local management through its Web GUI and CLI. Aruba Central is an additional central-management option.
Is this switch fanless?
No. The 24-port PoE model uses fixed fans. Fanless options exist elsewhere in the CX 6000 family for smaller deployments.
How do I confirm UAE availability?
Provide FourTeck with the required quantity, SFPs, management preference and deployment scope so current availability and lead time can be checked for the exact requirement.
Confirm the Right CX 6000 Configuration for Your Site
Share your port count, PoE device list, uplink requirement and management preference so FourTeck can help scope the hardware, accessories and services required for your UAE deployment.
Reviews
There are no reviews yet.